• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.32-38
• /
• 2012

In this paper, we design on nonliner 3 user Dirty Paper Precoding for MIMO adjacant interference signal cancellation based on 3 GPP LTE Release 10. In this paper, in order to reduce the inter-channel interference at the transmitted side, we propose the Dirty Paper Precoding scheme for 3-user MIMO wireless systems using LQ decomposition and Gram-Schmidt algorithm based in its orthonormal basis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.141-147
• /
• 2000

In the restoration of degraded noisy motion blurred image, we have trade-off problem between smoothing the noise and restoration of the edge region. While the noise is smoothed, die edge or details will be corrupted. On the other hand, restoring the edge will amplify the noise. To solve this problem we propose an adaptive algorithm which uses I- H regularization operator for flat region and Laplacian regularization operator for edge region. Through the experiments, we verify that the proposed method shows better results in the suppression of the noise amplification in flat region, introducing less ringing artifacts in edge region and better ISNR than those of the conventional ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3094-3097
• /
• 2009

The use of general-purpose divider is inevitable to implement a image down-scaler when an arbitrary scaling ratio is given. To get an output at every clock from the divider, the divider should be implemented by LUT, however, its hardware size will be bigger and bigger as the precision level is increased. In this paper, a new image scaling algorithm is presented for a arbitrary scaling ratio, which do not requires a general-purpose or LUT-based divider. The proposed algorithm utilizes only comparators and adders such that the hardware size can be reduced by 1/10 compared to the conventional approaches.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.241-250
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and synchronizations and secure communication of a lossy equivalent transmission are investigated. Since the synchronization of the lossy equivalent transmission system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the lossy equivalent transmission system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2201-2206
• /
• 2008

This paper presents a method of constructing the Linear Digital Switching Function(LDSF) over finite fields. The proposed method is as following. First of all, we extract the input/output relationship of linear characteristics for the given digital switching functions, Next, we convert the input/output relationship to Directed Cyclic Graph(DCG) using basic gates adder and coefficient multiplier that are defined by mathematical properties in finite fields. Also, we propose the new factorization method for matrix characteristics equation that represent the relationship of the input/output characteristics. The proposed method have properties of generalization and regularity. Also, the proposed method is possible to any prime number multiplication expression.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.146-147
• /
• 2023

해양사고는 도로교통과 달리 지속적으로 증가하고 있으며, 인명피해가 주로 발생하는 주요 사고의 치사율은 도로교통의 11.7배 이상이다. 해양사고는 외부 환경에 따라 사고 위치가 변하고 즉각적인 조치가 어려워 타 교통에 비해 대형 사고로 이어질 가능성이 매우 크다. 그러나 여전히 사고가 발생하고 난 후 대응하는 등 사후적 관리 단계에 무르고 있어 사고의 주요 요인을 사전에 식별·관리하는 선제적 관리단계로의 전환 필요성이 대두되고 있다. 따라서 본 연구에서는 해양사고 발생 지점 밀도 기반의 가변 공간 군집체계를 반영한 해양사고 예측모델을 개발하였다. 반복적인 공간 가산분석을 통해 밀도가 높을수록 작은 규모의 격자 체계를 가질 수 있도록 상세한 공간 군집체계를 구성하였으며, 단순 사고 위험도 예측뿐만 아닌 사고 인과관계를 설명할 수 있는 BN(Bayesian Network) 기반의 모형을 사용하여 해양사고 위험예측 모델을 개발하였다. 또한, Cost-of-Omission을 통해 해양사고 예측확률의 변화와 각 변수들의 영향력을 확인하였으며, 월별 해양사고예측 결과를 GIS를 활용하여 2D/3D 기반으로 시각화하였다.

• Journal of Korean Society of Transportation
• /
• v.29 no.5
• /
• pp.7-17
• /
• 2011

Traffic problems caused by drunk drivers have been steadily raised from the past. Even though the previous researches have focused on the development of countermeasures for preventing drunk driving, the number of drivers violating the DUI (Driving-Under-Influence) regulation is still increasing. Many studies seek countermeasures for preventing drunk driving by comparing the differences between general and drunk drivers. However, few researches have investigated focusing only on the characteristics of drunk drivers. It is well known that characteristics of general drivers are different from those of drunk drivers, and also habitual drunk drivers have different characteristics from non-habitual drunk drivers. Motivated by this fact, only the drivers who have violated DUI regulation are considered in the analysis. This study primarily aims to provide alternative solutions for reducing habitual drunk drivers who are highly inclined to do drunk driving repeatedly. For the analysis, various types of variables potentially effecting drunk driving behavior were investigated, and then truncated count data models were developed to analyze the effects of the variables selected on drunk driving. The results showed that 1) a truncated negative binomial model is better fitted to the data; and 2) five variables including experiential learning, the lack of self-control, self-reflection, the fear of crackdown, and the level of dependence on vehicles were found to be statistically significant.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.18-31
• /
• 1989

To analyze the impact of air pollution control on electricity generation cost, a computer program was developed. POGEN calculates levelized discounted power generation cost including additional air pollution control cost for coal power plant. Pollution subprogram calculates total capital and variable costs using governing equations for flue gas control. The costs are used as additional input for levelized discounted power generation cost subprogram. Pollution output for Rue Gas Desulphurization direct cost was verified using published cost data of well experienced industrialized countries. The power generation costs for the year 2001 were estimated by POGEN for three different regulatory scenarios imposed on coal power plant, and by levelized discounted power generation cost subprogram for nuclear power. Because of uncertainty expected in input variables for future plants, sensitivity and uncertainty analysis were made to check the importance and uncertainty propagation of the input variables using Latin Hypercube Sampling and Multiple Least Square method. Most sensitive parameter for levelized discounted power generation cost is discount rate for both nuclear and coal. The control cost for flue gas alone reaches additional 9-11 mills/kWh with standard deviation less than 1.3 mills/kWh. This cost will be nearly 20% of power generation cost and 40% of one GW capacity coal power plant investment cost. With 90% confidence, the generation cost of nuclear power plant will be 32.6-51.9 mills/kWh, and for the coal power plant it will be 45.5-50.5 mills/kWh. Nuclear is favorable with 95% confidence under stringent future regulatory requirement in Korea.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.105-112
• /
• 2019

As the Construction Technology Promotion Act was revised in 2015, the term of Supervision was removed and Construction Management was included instead. The consideration of Construction Management shall be based on the cost plus fee method specified in the Criteria for the Cost of Construction Technology Services of the Ministry of Land, Infrastructure and Transport. Nevertheless, it is based on the construction cost ratio in accordance with the Economy and Finance Ministry's Detailed Guidelines for Preparing the 2018 Budget Plan and Fund Management Plan (Manual for Business Type and Item). As a result, it has been expected that Construction Management consideration will be calculated according to a single government standard and that the Criteria will be applied reasonably. In addition, although the change in the Labor Standard Act has a significant effect on the working environment of the construction site, the nature of the construction site is not considered in this Act. Based on these problems, the study suggested that the government should apply a single standard after consultation with the relevant agencies when calculating the consideration for Construction management, that the scope of the Criteria for the Cost of Construction Technology Services should be clear, that the amount of input by the Construction Manager should be considered for the capability of engineers and the number of working days, and that construction characteristics should be considered when determining the number of working days and hours.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.11-16
• /
• 2005

This paper proposes a bit manipulation accelerator (BMA) having application specific instructions, which efficiently supports scrambling, convolutional encoding, puncturing, and interleaving. Conventional DSPs cannot effectively perform bit manipulation functions since かey have multiply accumulate (MAC) oriented data paths and word-based functions. However, the proposed accelerator can efficiently process bit manipulation functions using parallel shift and Exclusive-OR (XOR) operations and bit jnsertion/extraction operations on multiple data. The proposed BMA has been modeled by VHDL and synthesized using the SEC $0.18\mu m$ standard cell library and the gate count of the BMA is only about 1,700 gates. Performance comparisons show that the number of clock cycles can be reduced about $40\%\sim80\%$ for scrambling, convolutional encoding and interleaving compared with existing DSPs.