• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.120-130
• /
• 2009

This study focuses on the methodology of an ecological interpretation of Korean traditional landscapes through both life-oriented philosophy and traditional Korean philosophy which are similar to ecology. Also, useful tools for discovering an ecological technique of formation based on the ecological thoughts in ancestors' life are shown. Ecological key words as interpretative tools on the traditional landscape replaced ecological concepts in Korean culture and landscape. There are 'Bonsung(本性; the original nature)', 'Chungjeol(中絶; moderation)', 'Hyoyul(效率; efficiency)', 'Sangsaeng(相生; symbiosis)', 'Jasaeng(自生; self-generation)', 'Chunghwa(中和; neutralization)', 'Bangtong(旁通; communication)', and 'Byuntong(變通; variableness)'. For the case study, the concepts of 'spatial structure', 'constructive elements in the traditional gardens', and 'structural elements in the dwelling houses' were extracted from $\ulcorner$Imwonkyeongjeji$\lrcorner$ as an interpretative subject. As a result, Jeongon house, Jongtaek of Choi's family(the first incoming resident) showed us an ecological technique of formation by interpretation on the composing elements. Namely, they are natural dwelling houses in harmony with natural conditions and delicate relational styles. Five kinds of ecological characteristics were exposed. They are: 1. land use method following natural features('本性' '相生' '中和'), 2. physical and spatial elements in a body with nature('中絶' '相生' '中和'), 3. sustainable circulation system by recycling limited resources('效率' '自生' '旁通'), 4. use of natural materials based on the regional climate ('中絶' '效率' '自生') and 5. plane and structural decision by microclimate('效率' '自生' '變通'). Consequently, the dwelling houses and their traditional gardens aimed at the consuming space of the efficient resources by utilizing and circulating natural energy more than different types of the traditional spaces.

• Physical Therapy Korea
• /
• v.22 no.2
• /
• pp.21-29
• /
• 2015

This study investigated the effect of a load of 15% body weight on trunk, pelvis and hip joint coordination and angle variability in subjects with and without chronic low back pain (CLBP) during an anterior load carriage task. Thirty volunteers participated in the study (15 without CLBP, 15 with CLBP). All participants were asked to perform an anterior carriage task with a load of 15% body weight. The outcome measures included the means and standard deviations for measurements of three-dimensional coordination and angle variability of the trunk, pelvis and hip joint. As CLBP patient group .06, control group .70, the correlation coefficient between the groups showed a significant difference only in trunk-pelvic in the sagittal plane (p<.05). Angle variability of CLBP patient group increased significantly in the trunk in frontal plane, the pelvis in all sagittal plane, frontal plane, transverse plane, and the hip in sagittal plane, the hip in frontal plane than angle variability of control group (p<.05). This results mean that the CLBP patient group showed a disconnected coordination pattern in the trunk-pelvis in the sagittal plane, an increased pelvic angle variability in all three planes, and hip angle variability in the sagittal, and frontal planes. The CLBP patient group may have developed a compensatory movement of the pelvis and hip joint arising from the changed stability due to the abnormal coordination patterns of the trunk-pelvic in the sagittal plane. Therefore, CLBP symptoms can potentially worsen in the pelvis and adjacent hip joint in CLBP patients who perform weight-related behaviors in their daily lives. Further research is needed to determine the three-dimensional characteristics of the electromyography and neuromuscular aspects of subjects with CLBP.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2150-2158
• /
• 1992

This study was carried out to investigate the flow structure and mixing process of a cross mixing flow formed by two round jets with respect to the ratio of mass flow rate. This flow configuration is of great practical relevance in a variety of combustion systems, and the flow behaviour of a cross jet defends critically on the ratio of mass flow rate and the cross angle. The mass flow rate ratios of two different jets were controlled as 1.0, 0.8, 0.6, and 0.4, and the crossing angle of two round jets was fixed at 45 degree. The velocities issuing from jet nozzle with an exit diameter of 20mm were adjusted to 40m/s, 32m/s, 24m/s, and 16m/s, and the measurements have been conducted in the streamwise range of $1.1X_0$to $2.5X_0$ by an on-line measurement system consisted of a constant temperature type two channel hot-wire anemometry connected to a computer analyzing system. The original air flow was generated by a subsonic wind tunnel with reliable stabilities and uniform flows in the test section. For the analysis of the cross mixing flow structure in the downstream region after the cross point, the mean velocity profiles, the resultant velocity contours, and the three-dimensional profiles depending upon the mass flow rate ratio have been concentrately studied.

• Clean Technology
• /
• v.20 no.3
• /
• pp.226-231
• /
• 2014

This study presents a micromolding for the synthesis of Janus particles with reconfigurable shape by pH stimuli. First, we use acrylic acid (AA) as pH responsive monomer in the hydrophilic part and trimethylolpropane triacylate (TMPTA) in the hydrophobic part, respectively. The change of acidity in solvent induces the swelling of hydrophilic part in the Janus particles. The pH-responsive Janus particles show different swelling ratio of hydrophilic part in according to composition of acrylic acid in diverse range (0-70% v/v) and pH (3-11). As the concentration of acrylic acid in the hydrophilic part and environmental pH increase, the hydrophilic part in the Janus particles is proportionally swelled. Second, we fabricate novel type of Janus particles with two different hydrophilicities. As a proof of concept, we have applied acrylic acid (AA) and 2-(dimethylamino)ethyl methacrylate (DAEMA) into each part because the monomers provide reverse responsive activity. As expected, these Janus particles show different shape anisotropies with reconfigurable property in accordance with the polarity of each part at same acidity of environmental solvent. We envision that the stimuli responsive Janus particles have a wide application from fundamental science to diagnostic apparatus.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.91-102
• /
• 1999

It is known that the digital image enlargement technique which only uses spatially neighbored pixels information in a still image can increase the size of the image but the practical enhancement of resolution is small because the frequency bandwidth of the image is basically limited. To solve this problem, this paper proposes the digital image enlargement technique that improves the reconstruction of the edge components by selectively transposing the direction of the subwindows of pseudomedian filter according to the distribution of neighbored pixels to the interpolation point. The pseudomedian filter has the better performance in aspect of the reconstruction of edge information when the pixel values masked by two subwindows parallel to the interpolation point are very similar and the pixel values masked by another subwindow that is orthogonal to the above two subwindows are similar to each other. In this paper, the computer simulation for digital image enlargement was performed with consideration of these characteristics when selecting the subwindows of pseudomedina filter. Based on this simulation result, the performance of the proposed method was analysed and its effectiveness was assessed. According to the proposed method, visual artifacts that result from using the limited samples can be effectively suppressed, and most characteristics and shapes of the original image can be preserved as well.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1251-1260
• /
• 2018

High-quality sea-ice surface models generated from aerial images can be used effectively as field data for developing satellite-based remote sensing methods but also as analysis data for understanding geometric variations of Arctic sea-ice. However, the lack of texture information on sea-ice surfaces can reduce the accuracy of image matching. In this paper, we analyze the performance of matching cost functions for homogeneous sea-ice surfaces as a part of high-quality sea-ice surface model generation. The matching cost functions include sum of squared differences (SSD), normalized cross-correlation (NCC), and zero-mean normalized cross-correlation (ZNCC) in image domain and phase correlation (PC), orientation correlation (OC), and gradient correlation (GC) in frequency domain. In order to analyze the matching performance for texture changes clearly and objectively, a new evaluation methodology based on the principle of object-space matching technique was introduced. Experimental results showed that it is possible to secure reliability and accuracy of image matching only when optimal search windows are variably applied to each matching point in textureless regions such as sea-ice surfaces. Among the matching cost functions, NCC and ZNCC showed the best performance for texture changes.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.325-330
• /
• 2021

This study set out to investigate the forms, attributes, and escape methods of post-subjects projected on the investigator's works in connection with rhizomatic thinking proposed as a way of social transformation by Deleuze and Guattari and examine their social connotations. Post-subjects projected on the investigator's works are not completed wholes of some sort, but like materials whose constant premise is change and creation. In the investigator's works, post-subjects have conscious and unconscious desire. It is the desire of creation with positive attributes including Deleuze's and Guattari's pursuit of changes in a contradicting society. When desire is deployed in post-subjects, they will carry out an escape. This way of escape is rhizomatic proposed by Deleuze and Guattari. It deconstructs contradicting things and repeats connection, contact, and severance with the outside world, building a new order. Rhizomatic post-subjects appearing in the investigator's works depict the escape process and method in abstract ways through the variable installation of objets combined with a color field of repeating brushes. In this work, the goal of post-subjects is to make a safe landing in a space where beings are recognized for their values and free and creative lives. These post-subjects are nomads creating a new landscape continuously, wandering around vast plains, and also artists and literary figures resisting a contradicting society. That is, they are connected to the concept of a war machine proposed by Deleuze and Guattari as a concept of social transformation and to the concept of Nietzsche's Agon to devise and create new values and politics based on street passion. They seek after a space where they can co-exist with otherness recognized rather than the complete deconstruction of the old order.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.17-25
• /
• 2022

The pintle injector has many advantages in the key characteristics of a liquid rocket engine, such as combustion stability, combustion efficiency, and wide range of comprehensive thrust control, design and manufacture, and test fired under supercritical conditions. The pintle injector is manufactured with a rectangular, single-row orifice for thrust control and production considerations. In order to verify the combustion performance of the pintle injector and its potential as a commercial injector, the combustion characteristics were analyzed by varying the TMR (Total Momentum Ratio) and BF (Blockage Factor). The result of the hot firing test showed that the heat flux increased as TMR increased, and it confirmed that the characteristic velocity efficiency was more affected by BF than TMR. Suppose a single-row pintle injector with efficiency characteristics insensitive to changes in TMR can achieve high efficiency at low fuel differential pressure conditions. In that case, the variable pintle injector's design flexibility can be increase.

• Composites Research
• /
• v.19 no.5
• /
• pp.20-27
• /
• 2006

Self-sensing and interfacial evaluation of Ni nanowire/polymer composites were investigated using electro-macromechanical technique, which can be used fur a feasible sensing measurement on tensile and compressive loading/consequent unloading, temperature, and humidity. Mechanical properties of Ni nanowire with different aspect ratio and adding contents in either epoxy or silicone composites were measured indirectly using electro-pullout test under uniform and non-uniform cyclic loadings. Comparing apparent modulus with the conventional mechanical tensile modulus of Ni nanowire/epoxy composites, the trends were consistent with each other. Ni nanowire/epoxy composites showed the sensing response on humidity and temperature. Self-sensing on applied tensile and compressive loading/unloading was also responded for Ni nanowire/silicone composites via electrical contact resistivity showing the opposite trend between tension and compression. It can be due to the different electrically-interconnecting mechanisms of dispersed Ni nanowires embedded in silicone matrix.