• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.362-367
• /
• 2001

A reciprocating compressor unit with variable rotating speed driven by BLDC motor is mounted inside hermetic chamber on an internal suspension composed of 4 coil springs and a discharge pipe. A method for predicting the dynamic behavior of compressor frame is required to reduce the transmitted vibration level. Mechanical characteristics such as mass, spring and discharge pipe stiffness properties are obtained with experimentation. To confirm the vibration model for compressor frame, free vibration analyses are performed with theoretical and experimental methods. Results for analytical and experimental investigations on dynamic behavior of the compressor frame are presented, and the agreement between measured and predicted results are satisfactory.

• Tribology and Lubricants
• /
• v.17 no.6
• /
• pp.426-434
• /
• 2001

The hermetic reciprocating compressor driven by the BLDC motor rotating with variable speeds, is modelled and analyzed for dynamic characteristics. The governing equations of piston, connecting rod and crank-shaft of the reciprocating compression mechanism and characteristics of driving torque of the motor are obtained. Dynamic behavior of the crankshaft supported on 2 journal bearings is analyzed considering compression load and eccentric unbalance for the 4 rotating speeds of crankshaft. And. reaction forces generated from oil film in the journal bearings are analyzed under transient condition using Reynolds' equation. To take into account the dynamic characteristics depending on the variable rotating speeds, comparison on the dynamic behavior of crank-shaft is made for the 4 operating modes of the compressor. Results show that the magnitude of crankshaft locioperating on the lower rotating speeds is more larger than the higher ones due to reduction of inertia force of the reciprocating piston.

• Tribology and Lubricants
• /
• v.12 no.2
• /
• pp.8-19
• /
• 1996

Scroll compressor using a slide bushing type radial compliant crank mechanism is modelled, and it's dynamic behaviour characteristics are analyzed. Sealing forces generated in the flank surfaces of the orbiting scroll depending on the distance, e, from slide bushing center to crank pin center are calculated. From the stable condition of orbiting scroll for the moment equilibrium in tangential direction, the range of e is determined as 0$r_o$. Transient response of a crankshaft supported by two journal bearings is investigated, considering applied load, moment, and unbalance force by eccentric mass. As a result, conical whirl mode with circular orbits are obtained. The characteristics of journal orbits and frictional losses are calculated with a variation of viscosity and bearing clearance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.9
• /
• pp.810-817
• /
• 2001

Performance of a water-to-water multi-type heat pump system using R22 which has tow indoor units has been investigated experimentally. The refrigerant flow rate of each indoor unit was regulated by an electronic expansion valve and the total refrigerant flow rate of the system was controlled by a variable speed compressor. In the system, evaporator outlet pressure of refrigerant and outlet temperatures of secondary fluid from indoor units were selected as control variables. Experiments were executed for both cooling and heating modes using PID control method with fuzzy logic, and results of the test are compared with a classical PID method. In the case of PID control with fuzzy logic, the fuzzy control rules corrects PID parameters each time. Results show that PID control with fuzzy logic has the merits of quick response and reduced overshoot.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.6
• /
• pp.454-460
• /
• 2003

In order to investigate the cooling and heating characteristics of a variable-capacity system A/C applying a digital scroll compressor, the cooling and heating capacities and COP are measured by the psychrometric calorimeter. The capacity of the system is controlled by the digital scroll compressor, which is operated by controling PWM valve and the loading vs. unloading time. In the case of unloading compared that of loading, the consumption power of the compressor is about 11% and the capacity variation of the system A/C is within about 1%. When the system A/C is operated under the cooling and heating standard conditions, COP is nearly uniform but cooling capacity and heating capacity increase at minimum, rated and maximum modes. The system A/C applying the digital scroll compressor is effective for the range with high load or the width of large load variation. When the auxiliary heater is on, at the cold region, the system A/C produces the excellent heating capacity.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.5
• /
• pp.58-65
• /
• 2007

As multimedia portable devices become popular, the amount of computation for processing data including video compression has significantly increased. Various researches for low power consumption of the mobile devices and real time processing have been reported. Motion Estimation is responsible for 67% of H.264 encoder complexity. In this research, a new circuit is designed for motion estimation. The new circuit uses motion prediction based on approximate SAD, Alternative Row Scan (ARS), DAU, and FDVS algorithms. Our new method can reduce the amount of computation by 75% when compared to multi-frame motion estimation suggested in JM8.2. Furthermore, optimal number and size of reference frame blocks are determined to reduce computation without affecting the PSNR. The proposed Motion Estimation method has been verified by using the hardware and software Co-Simulation with iPROVE. It can process 30 CIF frames/sec at 50MHz.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1356-1357
• /
• 2008

교류 펄스전압을 이용하여 글라이딩 아크 플라즈마 반응기에서 지구 온난화의 주요 원인으로 꼽히는 PFCs(Perfluoro compounds) 가스의 일종인 $SF_6$에 관한 분해 연구를 하였다. 가스의 농도를 조절하기 위하여 압축공기를 사용하였고 각각의 유량을 MFC를 통하여 조절하였다. 반응기 내의 양전극사이에 인가하는 전압을 아크가 발생하는 7kV$\sim$10kV 사이를 1kV 단위로 가변하였고 유량을 변화시켜가며 실험한 결과 높은 전압과 낮은 유량일 때 높은 분해율 특성을 보였다. 기본 방전 특성을 오실로 스코프를 통하여 관찰 분석하였다. 각 가스들의 분해율과 분해후 가스 성분분석은 글라이딩 아크 플라즈마와의 반응후 가스를 포집하여 FT-IR을 통하여 분석하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.68-77
• /
• 2017

High-frequency combustion instability results from a feedback coupling between the unsteady heat release rate and the acoustic waves formed resonantly in the combustion chamber. It can be modeled as thermoacoustic problems with various degrees of the assumptions and simplifications. This paper presents numerical analysis of self-excited combustion instabilities in a variable-length lean-premixed combustor and designs of passive control devices such as baffle and acoustic resonators in a framework of 3-D FEM Helmholtz solver. Nonlinear behaviors such as steep-fronted shock waves and a finite amplitude limit cycle are also investigated with a compressible flow simulation technique.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.551-562
• /
• 2002

Digital TV software, receiver system for digital broadcasting, processes huge MPEG-2 TS formatted data that has variable hierarchy. Because of complexity and enormity of MPEG-2 TS, it is difficult for user to generate test data manually. Generating of test data is not only expensive and time consuming but also requires expert knowledge of MPEG-2 standard. In this paper, we implemented the tool that generates the MPEG-2 TS formatted test data for Digital TV software. Using this tool, user ran get reliable test data without extensive knowledge of MPEG-2 standard. Also, database mechanism that our tool based on supports variable hierarchy of MPEG-2 TS.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.31-39
• /
• 2010

VoD(Video-on-Demand) servers have to provide timely processing guarantees for continuous media and reduce the storage and bandwidth requirements for continuous media. The compression techniques make the bit rates of compressed video data significantly variable from frame to frame. A VoD system should be able to provide the client with interactive operations such as fast forward and fast rewind in addition to normal playback of movie. However, interactive operations require additional resources such as storage space, disk bandwidth, memory and network bandwidth. In a stored video application such as VoD system, it is possible that a priori disk access patterns can be used to reserve the system resources in advance. In addition, clients of VoD server spend most of their time in playback mode and the period of time spent in interactive mode is relatively small. In this paper, I present the new buffer management scheme that provides efficient support for interactive operations in a VoD server using variable bit rate continuous media. Simulation results show that our strategy achieves 34% increase of the number of accepted clients over the LRU strategy.