• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.241-247
• /
• 2002

In this paper, we proposed a continuously variable true time-delay for transmit linear phased-array antenna sing chirped fiber gratings(CFGs) and a tunable laser source. Average group delay-slope of the CFG was treasured to be 177 ps/nm at L-, S-, and X-band. Simulation results show that the maximum gain of the transmit linear phased-array antenna with the beam steering angle of 180$^{\circ}$ is 11.6 dB at 10 GHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.434-438
• /
• 2003

XeCl 엑시머 레이저로 펌핑되는 쌍공진기형 색소레이저와 2단 증폭시스템을 개발하여 원격계측 시스템에 적합한 두 개의 파장을 동시 또는 순차적으로 출력하였다. 개발된 쌍공진기는 1200 g/mm의 회절격자를 갖는 grazing-incidence 방법에서 제 1차 및 제 2차 회절차수를 이용하여 구성되었다. 출력특성은 스펙트럼 선폭이 10 pm이하이고, 펌프 에너지에 대하 전체효율은 6% 이상이다. 또한, 파장가변 영역은 제 1차 및 제 2차의 회절차수에 대해 각각 434-470 nm, 436-468 nm 이며, 2단의 증폭기의 증폭이득은 37dB, 추출효율은 9%이다. 개발된 레이저 증폭시스템에서 Coumarine-450의 색소로 발진하고, 이의 출력 6 mJ을 원격계측시스템에 적용하여 수원상공의 NO$_2$의 가스농도분포를 측정하였다. 이 결과 개발된 색소레이저 시스템은 원격계측 시스템의 광원으로 매우 적합함을 확인하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.2
• /
• pp.196-204
• /
• 1994

Studied was impact assessment of sea dike construction in Saemankeum. To represent complexity of the geometry and topography of the region a flexible finite grid system are adopted. Combined fine and coarse meshes based on automatic mesh generator were applied in pre-processing. A nonlinear periodic finite element model. TEANL, was implied in this analysis, which gave good results compared to the observed data. It was predicted that the front region of dike connecting Shinsi-Karyeok-Daehang-Pyunsan will behave as a closed rectangular bay with wide width, which may affect significantly to the circulation and dispersion mechanism in the region.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.4
• /
• pp.241-257
• /
• 2004

Global prognostic models based on NCOM(NCAR CSM Ocean Model) of NCAR which is generic from Bryan-Cox-Semtner model are established to study the ocean circulation in the neighboring seas of Korean peninsula. The model domain covers areas from $80.6{^\circ}S~88.6{^\circ}N$in meridional direction and the vertical water column is divided into 15 levels taking enhanced grid resolution of $0.3^\circ$ around Korean peninsula. Island option is used for 22 islands to simulate inshore circulation by hole-relaxation method and the restart hydrographic data are taken from NCAR(1998) CSM model that has been run for 300 years. The wind stress data are taken from Choi et al. (2002). Based on the model results, circulation patterns in the NW Pacific and global oceans are investigated. Volume transports calculated at five straits in the neighboring seas of Korean peninsula are compared with the results from Choi et al. (2002) and other observed data.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.219-224
• /
• 2006

3 차원 입력 장치는 키보드나 마우스 같은 일반적인 입력 장치로는 받아 들이기 어려운 3 차원 입력을 사용자로부터 간편하고 직관적인 방법으로 받아들일 수 있다는 측면에서 활발히 연구 및 사용되고 있다. 또한 햅틱 장치는 가상 물체의 조작에 따른 시각적인 피드백 외에 가상 물체의 느낌을 피드백 힘을 통해 사용자에게 전달해 줌으로써 컴퓨터와 사용자간의 상호 작용에 큰 도움을 준다. 본 논문은 햅틱 피드백이 적용된 실시간 가변형 모델과 효과적인 3 차원 입력에 대한 기반 연구를 하고자 한다. 그리고 이에 대한 한 가지 사례로써 햅틱 장치를 이용한 가상 판화 시스템을 제작 한다. 가상 판화 시스템은 시각 처리 부분과 촉각 처리 부분, 그리고 사용자의 3 차원 입력을 돕는 인터페이스 부분으로 구성되어 있다. 시각 처리 부분은 3 차원 공간 상에서 사용자의 조각에 따른 판화 표면의 변형을 처리하며 촉각 처리 부분은 실제 판화를 제작할 때 느끼는 촉각을 햅틱 인터페이스를 이용하여 사용자에게 전달한다. 이를 위해 먼저 시각 처리 부분에서는 NURBS 기반의 자유 형상 변형 (FFD)기법을 이용하였는데 가상 조각도에 의한 물체 표면의 지역적인 변형을 구현하기 위해 조각도가 닿는 부분에 대해 기조 격자점 (control point)을 증가시켜 원하는 부분에 대한 지역적인 변화를 용이하도록 하였고 다음으로 촉각 처리 부분에서는 S-chain 모델을 이용하였는데 S-chain 모델을 객체 전체에 적용하지 않고 접촉이 일어날 경우 그 접촉점을 기준으로 S-chain 모델을 지역적으로 적용하는 방법을 고안하여 실제 구현에 이용하였다. 인터페이스 적인 측면에서 사용자의 3 차원 입력장치를 통한 인터렉션은 사용자로 하여금 보다 자유로운 입력을 허용하지만 이에 따른 깊이 지각 문제를 발생시킨다. 이러한 문제를 최소화 시키고 사용자의 깊이 지각을 강화시키기 위해 사용자에게 제공되는 시각적 자극을 변형시키고 다양한 정보를 제공하도록 하였다. 가상 판화 시스템은 가상 환경에서 사용자의 조작에 따른 다양한 결과물을 제작 및 출력해 볼 수 있도록 해준다. 또한 가상 환경에서 이러한 기반을 제공함으로써 가상 환경의 장점인 복사, 이동 및 영구 보존 특성을 동시에 얻을 수 있다. 본 논문은 이러한 작업을 위한 기반 기술로써 햅틱 및 가변형 모델, 3 차원 입력 장치에 대한 시각적 인터페이스에 대해 다루고 이 기반 기술을 바탕으로한 가상 판화 시스템의 구현에 대하여 논하고자 한다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.238-243
• /
• 1996

We have developed XeCl laser pumped double-resonator Dye laser and two-stage amplifier system, and generated simultaneously of alternatively two wavelengths suitable in DIAL system. The developed double-resonator is composed of 1st and 2nd diffraction orders on light incidence angle in grazing-incidence grating method with 1200 g/mm. We have obtained spectral linewidth below 10 pm and the total efficiency dependent on pump energy over 6%. The tuning ranges dependent on 1st and 2nd diffraction orders are 434~470 nm and 436~468 nm, respectively. The amplification gain and rine-450 dye laser by using the double-resonator laser system and measured the distribution of $NO_2$ concentration over Suwon as the result of transmission of laser output of 6 mJ in this DIAL system. Consequently, we have confirmed that the developed dye laser system is very useful as the tunable source for DIAL.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1145-1158
• /
• 1994

A three-dimensional, finite difference, numerical model with free surface was developed on ${\sigma}$-coordinate. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The scheme is essentially independent of the stringent stability criteria (CFL condition) for explicit schemes of external surface gravity wave. Implicit algorithm was applied for vertical shear stress, Coriolis force and pressure gradient terms. The reliability of the model with vertically variable grid system was checked by the comparison of simulation results with analytic solution of wind-driven currents in a one-dimensional channel. Sensitivity analysis of differencing parameters was carried out by applying the model to the calculation of wind-driven currents in a square lake.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.43-52
• /
• 1999

We propose a new method for tuning of center wavelength in photorefractive filter using $LiNbO_3$ crystal doped with 0.015Wt.% Fe. through the filter bandwidth property analysis using the geometrical method, a new wavelength selectivity theory was presented. In this scheme, the tuning of the center wavelength can be achieved by the real time incident angle control of the received heam, which was gotten by the spatial light modulator. So, tuning time depend on the response time of the SLM and results in the high speed turing. Because the use of thermally fixed grating in our filter, it has uniform diffraction property to the all filtering wavelength. Designed tunable filter has 4nm bandwidth and composed of the three channel with 10nm space. From the optical experiment, we get the 4.5nm, 4.25nm, 4nm bandwidth and 1530.5nm, 1540.5nm, 1549.5nm center wavelength respectively.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.149-153
• /
• 1997

We demonstrate the operating characteristics(center wavelength, bandwidth, TE/TM polarization, tuning range) of grating-assisted co-directional coupler(GACC) filter fabricated with InGaAsP compound semiconductor. A design of waveguide structure has been focused on the narrow bandwidth characteristics of the filter. Reactive ion etching technique was employed for the uniform waveguide formation. The bandwidths(FWHM) and center wavelengths of the fabricated GACC filter were measured by 1.5 nm and 1530.6 nm for TE polarization and 1.3 nm and 1494.0 nm for TM polarization. This is the one of the narrowest bandwidth at 1530 nm region ever reported. The center wavelength shifted form 1530 nm to 1538 nm when the current of 100 mA was injected at 4.5 mm-long device. Good agreement between the designed and measured operating characteristics for some waveguide structures is demonstrated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.135-139
• /
• 2001

This paper describes a string resonator that is used for the interrogation system of a Fiber Bragg Grating(FBG) strain sensor. The strain on the fiber piece is calculated from the measured frequency based on that the natural frequency of a string is a function of the applied absolute strain. Existing research considered a fiber as a string, but a fiber is not a string in the strict sense due to its bending stiffness, thus the fiber should be modeled as a beam accompanied with an axial force. In the vibration modeling, the relationship between the strain and the natural frequency is derived, and then the resonance condition is described in terms of both the phase and the mode shape for sustaining resonant motion. Several experiments verify the effectiveness of the proposed model of the fiber. The performance of the string resonator is analyzed by measuring the frequency change according to the applied strains in the dynamic range of 1100$\mu\varepsilon$ referred to the displacement from capacitance sensor. From the experimental results, the implemented string resonator provides the accuracy of $\pm$3$\mu\varepsilon$, the quasi-static resolution of ~0.1$\mu\varepsilon$(rms) which amount to be $\pm$0.17$\mu\textrm{m}$ and ~6nm respectively, in case of fiber length of 56mm. For a dynamic strain, it can provide the accuracy of ~3$\mu\varepsilon$ until the frequency comes to 8Hz. As a consequence, the string resonator proposed for FBG sensor provides the high accuracy and the high resolution in strain measurement, and also it is expecting to be used, for the application, to not only strain but also displacement measuring device.