• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.350-353
• /
• 2008

과산화물 가교제의 농도가 헬리콥터 연료탱크의 자기밀폐층 소재로 적용시키기 위한 천연고무 스폰지의 팽윤에 미치는 효과를 조사하였다. 천연고무 콤파운드를 Kneader와 Roll-Mill을 활용하여 제조하고, 고압조건의 프레스에서 부분 가교시킨 후 대기압의 금형에서 발포와 완전가교를 실시하였다. 얻어진 스폰지의 겉보기밀도를 측정하고 스폰지의 셀구조를 주사전자현미경을 통하여 관찰하였다. 톨루엔, 이소옥탄과 항공유를 사용하여 실온에서 팽윤실험을 실시하였다. 용매에 2분 동안 침적 후 얻어지는 부피팽윤비 값은 과산화물 농도가 감소함에 따라 증가하다가 감소하는 경향을 보였다. 스폰지의 겉보기밀도와 셀구조는 과산화물 함량에 매우 민감하였으며 이는 또한 천연고무 스폰지의 팽윤거동에 영향을 미쳤다. 천연고무 스폰지가 연료와 접촉하여 신속한 팽윤이 얻어지기 위하여 금형에서 동시에 발생하는 두 가지 반응인 발포제의 분해반응과 천연고무의 가교반응을 적절히 조절하는 것이 중요하다.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.45-53
• /
• 2011

The effect of the silane coupling agent, bis(triethoxysilypropyl)tetrasulfide (TESPT), on mechanical properties of a silica-filled NBR compound for oilseal was investigated. Curing behavior and crosslinking density of the compounds were measured using ODR (oscillating disk rheometer) and swelling ratio in toluene. UTM (universal testing machine) and shore A hardness tester were used in order to study the characteristics of mechanical properties of original vulcanizates and aged ones with heated air and ASTM No. 3. oil. Recovery of elasticity which influences the performance and service life of oilseal was investigated by giving bending deformation to vulcanizates in aging condition. After bending aging test, recovery distance was measured and calculated angle of recovery from it. TR (temperature retraction) test was performed on these vulcanizates to determine the low temperature recovery behavior. Wear resistance was measured by Taber type abrasion tester. In addition, SEM was used to characterize the morphology of the worn surface of vulcanizates. The result showed that addition of TESPT into silica-filled compound improves not only compound flow-ability, interaction between NBR and silica and crosslinking density, but also hardness, 100% modulus, recovery of elasticity, wear resistance, heat resistance and ASTM No.3 oil resistance of vulcanizates.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.45-52
• /
• 2010

Two different imide oligomers(6FDA-ODA/APA and 6FDA-MDA/MA) having crosslinkable end groups were prepared by using a solution imidization method and their properties were investigated. Also, semi-interpenetrating polymer networks(semi-IPN) were prepared using the blends of imide oligomers with polyetherimide $Ultem^{(R)}$, which is used in dual-ovenable packaging materials. The characteristic properties of semi-IPN films were interpreted by using TGA, Thin Film Diffusion Analyzer, and WAXD. Molecular weights of imide oligomers were successfully controlled utilizing 2-aminophenylacetylene(APA) and maleic anhydride(MA) as an endcapping agent. Exotherm reactions by crosslinking appeared and the amount of exthotherm heat was linearly increased as the content of imide oligomers was increased. For semi-IPNs of $Ultem^{(R)}$ and imide oligomers, 5% and 10% weight loss temperatures increased as the contents of imide oligomers were increased. Diffusion coefficient and water uptake of semi-IPNs decreased as the content of imide oligomers was increased, which might be resulted from hydrophobic fluorine group and high packing density. It was concluded that relatively low thermal stability and hydrolytic stability of polyetherimide $Ultem^{(R)}$ were improved by incorporating new developed imide oligomers.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.466-469
• /
• 2002

Polyurethane(PU)은 segmented 블록공중합체로써 상온보다 높은 유리전이온도(glass transition temperature, Tg)를 갖는 hard segment(H.S)와 상온보다 낮은 Tg를 갖는 soft segment (S.S)로 구성되어 있다. 이들 두 segment간의 열역학적 불친화성으로 인해 미세 상분리 구조를 갖는다$^1$. 그 결과 hard segment-rich hard domain과 soft segment-rich soft matrix의 구조를 이룬다. 이중 hard domain(HD)은 상온에서 glassy한 성격을 띄므로 물리적 가교점과 충진제의 역할을 하며 soft domain(SD)은 rubbery한 성질을 가지므로 polurethane에 탄성을 부여하는 역할을 한다. (중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.381-382
• /
• 2010

The fiber dispersion performance in fiber-reinforced cementitious composites is a crucial factor with respect to achieving desired mechanical performance. Thus, fiber dispersion of ECC incorporated by recycled mineral wastes was evaluated to more accurately predict uniaxial tension behavior.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.243-246
• /
• 2001

열가소성 고무탄성체인 폴리에테르에스테르계 고분자는 결정에 의한 물리적 가교를 형성할 수 있는 하드세그멘트 블록과 비결정성의 소프트세그멘트 블록으로 구성되어 탄성을 발현하는 성질을 갖는다. 이때 하드세그멘트의 함량의 변화는 고분자의 결정화 특성을 변화시켜 최종단계에서의 물성에 큰 영향을 미친다. 본 연구에서는 하드세그멘트가 PBT 구조로 이루어지고 소프트세그멘트는 PTMGT 구조를 갖는 4GT/PTMGT 고분자의 결정화 거동을 분석하였다. (중략)

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.94-98
• /
• 2011

Poly(2-hydroxyethyl methacrylate), PHEMA, hybrid gels containing Pluronic and acrylic acid (AAc) were prepared as new biocompatible and stimuli-responsive hydrogels by photo-polymerization technique. The prepared hybrid gel showed reversible, temperature-responsive swelling behavior due to the presence of Pluronic component, which underwent sol-gel transition at an elevated temperature to cause gel shrinkage. The hydrogel also exhibited increased swelling degrees and pH-sensitivity due to the AAc component with ionizable carboxylic acid groups. The microporous gel morphology and its changes upon stimuli was observed by scanning electron microscopy.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.123-127
• /
• 2003

액상실리콘으로 이루어진 초고압전력케이블용 프리몰드 접속재의 반도전-절연체 계면접합체를 다양한 제조조건과 조합별로 제조하여 계면접착력에 대한 영향을 검토하였다. 후가교적용 시 계면접착력이 강화되며 grade조합에 따른 특성차이가 존재하였다. 하지만 고온 장시간의 후가교 조건에서는 계면간의 화학적 결합력의 저하로 인해 오히려 접착력이 낮아지기도 하였다. 절연 RTV와의 계면접착성은 S-1재료가, 절연 LSR의 경우에는 S-3 재료가 가장 우수하였으며 도전안정성 측면에서도 S-3 재료가 상대적으로 유리하였다. 매입형 전극체를 제조하여 절연파괴거동을 연구한 결과 계면접착성과의 직접적인 상관관계는 크지 않음을 알 수 있었다.

• Composites Research
• /
• v.30 no.6
• /
• pp.371-378
• /
• 2017

In this study, hygroelastic behavior of thermosetting epoxy is predicted by molecular dynamics simulations. Since consistent exposures to humid environments lead to macroscopic degradation of polymer composite, computational simulation study of the hygroscopically aged epoxy cell is essential for long-time durability. Therefore, we modeled amorphous epoxy molecular unit cell structures at a crosslinking ratio of 30, 90% and with the moisture weight fraction of 0, 4 wt% respectively. Diglycidyl ether of bisphenol F (EPON862) and triethylenetetramine (TETA) are chosen as resin and curing agent respectively. Incorporating equilibrium and non-equilibrium ensemble simulation with a classical interatomic potential, various hygroelastic properties including diffusion coefficient of water, coefficient of moisture expansion (CME), stress-strain curve and elastic modulus are predicted. To establish the structural property relationship of pure epoxy, free volume and internal non-bond potential energy of epoxy are examined.

• Journal of Adhesion and Interface
• /
• v.9 no.3
• /
• pp.27-33
• /
• 2008

A series of aluminum acetylacetonate (AlACA) belonging in inorganic chelate calculating with the ratio of -COOH mole in PSA (0, 0.25, 0.5, 0.75, 1) and a series of PSA with different acrylic acid contents (3 wt%, 7 wt%, 10 wt%) were blended and measured gel contents, probe tack, peel strength, SAFT. With the increasing of aluminum acetylacetonate contents, the network structure was formed and gel contents were increased. Probe tack fibrillation and peel strength were decreased following the addition of aluminum acetylacetonate. SAFT were significantly changed with the change of acrylic acid contents in PSA. From these results, aluminum acetylacetonate could be used in the range of which would not change the performance a lot, and cure the PSA.