• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.210-218
• /
• 2011

The structure of kapok fiber was characterized using FTIR and $^{13}C$-NMR spectrometers, elemental analyzer, x-ray diffractometer, SEM and IMT I-Solution ver 7.5. The kapok has a hollow tube shape and is composed of cellulose I with crystallinity of 47.95%. To develop novel oil-sorbent materials necessary to avoid the environmental pollution by spilled oil, the oil absorption capacity of various fibers such as kapok, polypropylene(PP), acryl, bamboo, cotton, rayon and wool fibers is compared in this study. The kapok fiber had the highest oil absorption capacity among the fibers and its water absorption capacity was the least. The kapok fiber selectively absorbed significant amounts of oils (43g/g of fiber for kerosene, 65g/g of fiber for soybean oil), which might be due to higher hydrophobicity of the kapok fiber, suggesting that kapok fiber may have high potential as excellent oil-absorbent materials.

• Transactions of Materials Processing
• /
• v.25 no.2
• /
• pp.102-108
• /
• 2016

The aim of the current study was to develop an advanced prediction model for the slab width spread during hot rough rolling. Rough rolling consists of both vertical rolling using a set of profiled edger rolls and horizontal rolling using a set of plain work rolls. FE-simulations were performed to investigate the influences of process variables such as initial slab width, initial thickness, sizing draft, edger roll draft and work roll draft on the final slab width variation. From a statistical analysis of the simulation results, an advanced model, which can predict the slab width spread during the edger rolling and horizontal rolling, was developed. The experimental hot rolling trials showed that the newly developed model provided fairly accurate predictions on the slab width spread during hot rough rolling process using a profiled edger rolls.

• Laser Solutions
• /
• v.14 no.2
• /
• pp.1-7
• /
• 2011

The latest trends of vehicle technology development are fuel efficiency improvement, body designs declining air resistance and lightweight of materials. Especially, as lightened weight of materials makes engine efficient so that vehicles keep the best performance, it is the best way to protect the environment and reduce fuel consumption. In this study, we conducted laser welding by using 3-dimension remote scanner that is 5J32 aluminium alloy. Furthermore, conduction experiment that was 3 times repeated for changing factors such as observing angle, laser power and welding speed. we observed exterior and cross section of weled part and tensile strength. When increasing laser power and decreasing laser speed, tensile strength increased. In order to evaluate factors that affect tensile strength qualitatively we conducted ANOVA. We assumed that the factors are observing angle, laser power and welding speed. Then we found that laser power and laser speed affect tensile strength. We conducted evaluation of weldability of aluminium alloy by above ways.

• Transactions of Materials Processing
• /
• v.25 no.4
• /
• pp.235-241
• /
• 2016

Dimensional accuracy of hot coil is improved by precise control of thickness profiles, flatness, width and winding profile. Especially, precise width control is important because yield could be increased significantly. Precise width control can be improved by predicting the amount of width spread. The purpose of this study is to develop the advanced prediction model for width spread in hot finish rolling for controlling width precisely. FE-simulations were performed to investigate the effect of process variables on width spread such as reduction ratio, forward and backward tension and initial width at each stand. From the statistical analysis of simulated data, advanced model was developed based on the existing models for strip width spread. The experimental hot rolling trials showed that newly developed model provided fairly accurate predictions on the strip width spread during the whole hot finishing rolling process.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.230-236
• /
• 2014

The kapok fibers which are the functional fiber materials having natural hollows are environment friendly materials the demand and interest of which are increasing. The kapok fibers are environment friendly and natural hollow fibers which are 5-8 times lighter than cottons and have excellent performances in thermo keeping property, air permeability, bulkiness and resilience. In this study, the pretreatment according to the dyeing behaviors of kapok fibers were studied. Pretreatment(scouring, bleaching) were a variety of conditions. Scouring and bleaching, images of changed surfaces and cross-sections and dyeing behaviors of the dye-o-meter according to the concentration measured in meters and compared. Although the final exhaustion ratio of the kapok fibers scoured with a high concentration recipe was almost as same as that of the kapok fibers bleached with a high concentration recipe, the initial absorption speed of the kapok fibers scoured with the high concentration recipe was faster than that of the kapok fibers bleached with the high concentration recipe.

• Transactions of Materials Processing
• /
• v.18 no.1
• /
• pp.52-58
• /
• 2009

Generally, a vertical rolling process is used to achieve extensive width reduction in hot strip mill. However, it is impossible to avoid the defects such as dog-bone and edge-seam defect. The sizing press process has been developed in response to the defects mentioned above. Especially, this study is carried out to investigate the deformation of slab by two-step sizing press. The deformation behavior of slab in the sizing press process is more favorable than that in conventional vertical rolling edger. The FE-simulation is applied to predict the deformation behavior of the slab. In this paper, the several causes of the asymmetrical deformation are mentioned for the purpose of understanding of the anvil shape. Load, dog-bone and edge-seam defect are discussed in width sizing process considering the anvil shape. And to reduce the problems generated at rougher mill just after sizing press, these are studied in this paper. The deformation behavior of slabs and optimum anvil shape are obtained by rigid-plastic finite element analyses and neural network.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.43-43
• /
• 2011

현대인들은 생활환경에서 발생하는 각종 미세먼지 등의 입자상 오염물질 뿐만 아니라 각종 VOCs 등의 가스상 오염물질과 곰팡이, 박테리아, 바이러스 등 생물학적 오염물질까지 생활공간 내의 공기환경은 점점 악화 되고 있으며 공기 정화 등의 필요성이 증대 되고 있다. 이에 본 연구에서는 닥 펄프와 활성탄이 주성분인 Sheet를 Corrugation 장치를 통해 편파형(골판지)으로 제작하고, 다시 다층 구조로 적층된 골판지 sheet을 제작한 후 이를 두께 방향으로 일정 폭(20mm이하)으로 절단하여 필터부품의 소자로 이용하는 활성탄 필터의 제조 및 그 특성을 확인하고자 하였다. 닥펄프/펄프와 무기물의 혼합비, 해리시간 등의 변화를 주어 샘플을 만들었고, 강도, 평활성, 생산성 향상을 위해 첨가보조제 선정을 하였다. 이렇게 제조된 필터의 물리적 특성을 알아보고자 인장시험을 실시하였고, 주사전자현미경을 통하여 필터의 평활성과 표면을 관찰하였고 흡착성능 및 기능성을 VOCs 방출량, 탈취율, 항균도, 곰팡이 저항성 등의 실험을 통하여 알아보았다.

• Laser Solutions
• /
• v.18 no.2
• /
• pp.1-4
• /
• 2015

This study is related to the surface hardening treatment to spheroidal graphite cast iron for die by using high power diode laser. Laser device used in this experiment is capable of real-time laser power control. This is because the infrared temperature sensor (two color pyrometer) attached to the optical system measures the surface temperature of specimen and adjusts the laser power in real time. The surface treatment was carried out with the change of heat treatment temperature at the beam travel speed 3 mm/sec. Hardened width and depth was measured and hardened zone was analyzed by micro vickers hardness test in order to research the optimum condition of heat treatment. The changes in microstructure of the hardened zone also was examined. As a result of hardness measurement and observations on microstructure of hardened zone, hardness increased over three times as compared with base metal because the martensite was formed on the matrix structure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1427-1433
• /
• 2006

The antioxidant activity, nitrite scavenging effect, and angiotensine I-converting enzyme inhibiting activity of solvent extracts of soybean isoflavone were investigated. Also anticarcinogenic activities of them were examined by MTT assay using human cancer cell line. Isoflavone aglycones showed relatively high antioxidant activity in order of glycitein, genistein, and daidzein. Methanol extract of soybean actively scavenged free radicals and was shown excellent nitrite scavenging effect. Glycitein and methanol extract of soybean inhibited the growth of human cancer cell such as stomach carcinoma (SNU-1) and colon carcinoma (SNU-C4) effectively. Genistein, daidzein and methanol extracts of soybean inhibited the growth of cancer cell such as stomach carcinoma (SNU-1), but had weak activities to colon carcinoma (SNU-C4). To applicate the soybean isoflavone as an enhancer for food quality and processibility, the stabilities on heat and pH of isolated isoflavone, isoflavone in soybean flour and isoflavone concentrate of soybean were investigated. Stability of isoflavone concentrate of soybean was decreased in pH extreme (below 3, above 8) during sterilization, but isoflavone in soybean flour showed higher stability in all pH range. All kinds of isoflavone tested in this study were very stable during the heat treatment.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.40-45
• /
• 2016

It should be noted that the use of the lathe scrap for making fiber reinforced cementitious composites raised friendly environmental effect as well as economy because the lathe scrap is a by-product of steel manefactures and is occurred when lathe and milling works of them are conducted to process steel manufactures. Thus, the purpose of this experimental research is to investigate workability and strength characteristics of lathe scrap reinforced cementitious composites(LSRCCs). For this purpose, three types of lathe scraps were collected from processing plants of metal, and then LSRCCs containing these were made for 2mm width and 40mm length. As a result, it was observed from the test results that the workability of LSRCCs was slightly decreased than plain mortar and the flexural strength of LSRCCs were much larger than these of plain mortar and effect of types of lathe scrap on the characteristics of LSRCCs were somewhat large.