• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.66-72
• /
• 2018

Corn stover is known as a good candidate for a functional food ingredient when the main lignocellulosic material, lignin, is used as bioactive materials as form of polyphenolic compounds. The purpose of this study was to determine the microwave extraction conditions under which total phenolic compounds (TPC) and flavonoid contents of corn stover were maximized. Microwave-assisted extracts using sulfuric acid ranging from 0 to 1.0 mol with extraction time between 40 and 240 sec were conducted by using response surface methodology (RSM). Microwave power showed significant effects (p<0.05) and the concentrations of TPC and flavonoids increased with increased level of microwave power and extraction time. The optimum conditions for corn stover extraction were determined as 698.6 W, 240 sec, and 0 mol sulfuric acid, and the predicted value of TPC and flavonoid is 82.4 mg GAE/g DM and 18.1 mg/g DM, respectively. Microwave extraction was evaluated as an economic process with low energy consumption, short extraction and high extraction yield of bioactive including TPC and flavonoids compared to conventional extractions.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.22-28
• /
• 2015

In order to keep the competitiveness of LPG fuel for transportation fuel, the difference in fuel consumption with gasoline and cost for an aftertreatment system should be reduced with continuous development of technology for LPG engine. In the present study, spray-guided type direct injection combustion system, whose configuration is composed of direct injector in the vicinity of spark plug, was employed to realize stable lean combustion. A certain level of nitrogen oxides($NO_x$) emits due to a locally rich mixture regions in the stratified mixture. With the application of EGR system for the reduction of $NO_x$, 15% of $NO_x$ reduction was achieved whereas fuel consumption and hydrocarbon emission increased. By the application of EGR, the combustion speed reduced especially appeared at initial flame development period and peak heat release rates and increasing rates for heat release rate decreased as EGR rate increased due to the dilution effect of intake air.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.307-330
• /
• 2016

This article aims to explain how Gangnam, as a model and standard of compressed urbanization in South Korea, was created. Gangnam and Gangnam-style urbanization need attention not only because they contrast with Korea's urbanization in the past as well as urbanization in the West but also they provide an important model in contemporary Korea's politics, economy and culture. However, there are little studies of how Gangnam's peculiar urbanism was created. To fill this gap, this article will first capture Gangnam's peculiar urbanism as a material landscape and sociocultural lifestyle. Gangnam-style urbanism is (a) materially characterized by high-rise apartment complexes owned by the middle and upper class for dwelling and asset growth and (b) socio-culturally characterized by political conservatism, public indifference, competition over academic performance, appearance, and fashion, and nightlife. Then it will show Gangnam's archetype was created in a spatially and temporally compressed way in and through the spatial selectivity of Korean anti-communist authoritarian developmental state strategies: (1) anti-communism led to the diffusion and accommodation of the population through apartments in Gangnam in the context of its confrontation with North Korea and the fast-growing population of Seoul; (2) military authoritarianism excluded the low-income class and the urban poor from urban development; and (3) the developmental state adopted selective housing policy which treated construction companies and the middle class preferentially through exceptional zoning and price distortions, promoting the construction of apartment in Gangnam and its resultant uneven development.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.869-878
• /
• 2007

The purpose of this study was to investigate perception of risks among South Korean female college students within the process of purchasing apparel products through the Internet. The study was implemented by descriptive survey method using questionnaire and subjects consisted of 324 South Korean female college students. Findings of the study showed that the purchasing process particularly regarding delivery and security issues seemed to be a strong concern. On the other hand, unique selection such as apparel brands only available through the Internet was a strong appeal to 37.7% of subjects. Factor analysis profiled risk perception as: 1) Internet Shopping Selection Preference, 2) Delivery Problems and Lack of Security 3) Product Quality and Characteristics 4) Return Policy Difficulties and 5) Fair Prices. Discriminant analysis showed Factors 1, 2 and 3 were significant in helping to differentiate among Non-Purchasers, Fewer-purchasers and Many-Purchasers. Factor 1 and 3 helped differentiate among respondents relative to age range. Across all types of purchasers, offering unique selections of cutting edge fashions and improving risk perception relative to delivery and security concerns seemed important for gaining greater market share. Being able to delivery quality products and communicate product characteristics would be a powerful competitive edge to add to the incentive of convenience in shopping for apparel on the Internet.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.55-62
• /
• 2005

Recently, the opening of the world economy and regional ization of national demand endless endeavors and investments to upbring design-industry for regional economic development. Our domestic commodities, declined in price competitiveness against China and Southeast Asian nations, need construction of brand image of commodities and consumers' response through expanded concernments in marketing spheres. The design-industry is a important means to strengthen competitiveness of the domestic industry through discrimination of commodities and creativity of high added value. Design-industry has some problems in circumstances; commodity development and marketing are below the level in the sphere of manufacture industry yet and businessmen are unwilling to invest demanded for development of new design. Establishment of the personal foundation, useful for accumulating competent designers' experiences and technologies, can not pass limit. In addition, a system and a policy to protect design-industry have a problem in effectiveness. Concrete strategies to activate design industry which meets social and cultural circumstances of Daegu and Gyeongbuk region are to establish policy for construction of specialists' infra, systematization of study & development of design, common ownership of information on design, and expansion of design company. The business to upbring design in the region should be operated to develop competitive commodities which is helpful to the regional economy and to increase value of the regional enterprises' brand. In addition, foundation of design should be expanded personal, material, and informational infra through design-centered so that they are helpful to activate economy of Daegu and Gyeongbuk through making design reformational cluster.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.4
• /
• pp.627-653
• /
• 2006

The purpose of this study lies in understanding how the spectrum assigned for each mobile operator affects the consumers of mobile service. For this purpose, we have observed the change of path coefficient in the structural equation, using control variables. However, the structure of the mobile service market in Korea has become fixed. Considering this tendency and the conclusion of this study, the 'lock-in effect' occurs seriously in the mobile service market in Korea. It can be explained by the fact that CS(Customer Satisfaction) of the cellular subscribers little affects customer loyalty but the market dominance of the cellular service in the actual market has continued for a long time. In this study, we figured out a strong prejudice about call quality, which is caused by spectrum difference among competitors. Cellular subscribers tends to believe that call quality of their cellular service is better than that of PCS. In addition, we found that PCS operators can catch customer's retention by investment into network in order to increase call quality.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.150-163
• /
• 2008

It is said that customers buy not products but brands embedded in their mind, so that they are used as a key tool of strong marketing strategy. The present paper is a study on service brand equity, on which much research has not been conducted. The purpose of the present study is to propose the way to manage service brand equity which is essential to gaining competitive superiority by examining the effect of the factors of marketing communication on it. The researcher presented a research model by inquiring into existing researches on marketing communication and service brand equity and set up a research hypothesis. Internet service was chosen as the subject of the study. The reason for this is that it is the most intangible and there is no difference in price and quality, so that it is actively being marketed. The present positive study verified the relation between the factors of marketing communication such as advertising, public relations, sales promotion, and word-of-mouth advertising and brand recognition, brand image, and brand loyalty. The results of the positive study are as follows. Advertising, sales promotion and word-of-mouth advertising had an effect on brand recognition. Public relations, sales promotion and word-of-mouth advertising had an effect on brand image. Brand image and brand recognition affected brand loyalty.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.73-80
• /
• 2013

Metal prices are rapidly rising due to increasing demand of metals and limited available resources according to the industrial requirement. As a result, securing a stable supply of these metal resources has been recognized as a core element of national competitiveness and sustained economic growth. In the case of magnesium and its alloys which are entirely depending on import, low-grade magnesium scraps from end-of-life vehicles and 3C(Camera, Computer, Communication) parts and magnesium wastes such as sludge and dross generated during melting process are hardly recycled. Accordingly, the development and commercialization of recycling technology of low-grade magnesium scrap is desperately needed to improve efficiency of resource circulation and to establish the required proprietary of resource metal supply and demand. In this study, papers and patents on recycling technologies of waste magnesium were analyzed. The range of search was limited in the open patents of USA (US), European Union (EP), Japan (JP), Korea (KR) and SCI journals from 1974 to 2012. Patents and journals were collected using key-words searching and filtered by filtering criteria. The trends of the patents and journals was analyzed by the years, countries, companies, and technologies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.81-81
• /
• 2013

반도체, LCD, MEMs 등 미세 전자소자의 제작과 깊은 관련이 있는 IT 산업은 자동차 산업과 함께 세계 경제를 이끌고 있는 핵심 산업이며, 그 발전 가능성이 크다고 할 수 있다. 이 중 반도체, LCD 공정 기술에 관해서 대한민국은 세계를 선도하여 시장을 이끌어 나가고 있는 실정이다. 이들의 공정기술은 주로 높은 수율(yield)을 기반으로 한 대량 생산 기술에 초점이 맞추어져 있기 때문에, 현재와 같은 첨예한 가격 경쟁력이 요구되는 시대에서 공정 기술 개발을 통해 수율을 최대한으로 이끌어 내는 것이 현재 반도체를 비롯한 미세소자 산업이 직면하고 있는 하나의 중대한 과제라 할 수 있다. 특히 반도체공정에 있어 발전을 거듭하여 현재 20 nm 수준의 선폭을 갖는 소자들의 양산이 계획 있는데 이와 같은 나노미터급 선폭을 갖는 소자 양산과 관련된 CD (critical dimension)의 감소는 공차의 감소를 유발시키고 있으며, 패널의 양산에 있어서 생산 효율 증가를 위한 기판 크기의 대형화가 이루어지고 있다. 또한, 소자의 집적도를 높이기 위하여 높은 종횡비(aspect ratio)를 요구하는 공정이 일반화됨에 따라 단일 웨이퍼 내에서의 공정의 균일도(With in wafer uniformity, WIWU) 및 공정이 진행되는 시간에 따른 균일도(Wafer to wafer uniformity)의 변화 양상에 대한 파악을 통한 공정 진단에 대한 요구가 급증하고 있는 현실이다. 반도체 및 LCD 공정에 있어서 공정 균일도의 감시 및 향상을 위하여 박막, 증착, 식각의 주요 공정에 널리 사용되고 있는 플라즈마의 균일도(uniformity)를 파악하고 실시간으로 감시하는 것이 반드시 필요하며, 플라즈마의 균일도를 파악한다는 것은 플라즈마의 기판 상의 공간적 분포(radial direction)를 확인하여 보는 것을 의미한다. 현재까지 플라즈마의 공간적 분포를 진단하는 대표적인 방법으로는 랭뮤어 탐침(Langmuir Probe), 레이저 유도 형광법(Laser Induced Fluorescence, LIF) 그리고 광섬유를 이용한 발광분광법(Optical Emission Spectroscopy, OES)등이 있으나 랭뮤어 탐침은 플라즈마 본연의 상태에서 섭동(pertubation) 현상에 의한 교란, 이온에너지 측정의 한계로 인하여 공정의 실시간 감시에 적합하지 않으며, 레이저 유도 형광법은 측정 물질의 제한성 때문에 플라즈마 내부에 존재하는 다양한 종의 거동을 살필 수 없다는 단점 및 장치의 설치와 정렬(alignment)이 상대적으로 어려워 산업 현장에서 사용하기에 한계가 있다. 본 연구에서는 최소 50 cm에서 최대 400 cm까지 플라즈마 내 측정 거리에서 최대 20 mm 공간 분해가 가능한 광 수광 시스템 및 플라즈마 공정에서의 라디칼의 상태 변화를 분광학적 비접촉 방법으로 계측할 수 있는 발광 분광 분석기를 접목하여 플라즈마 챔버 내의 라디칼 공간 분포를 계측할 수 있는 진단 센서를 고안하고 이를 실 공정에 적용하여 보았다. 플라즈마 증착 및 식각 공정에서 형성된 박막의 두께 및 식각률과 공간 분해발광 분석법을 통하여 계측된 결과와의 매우 높은 상관관계를 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.490-496
• /
• 2013

The board using recycled wood waste chip tends to decrease in terms of physical and mechanical properties. The reasons are notably different shape of chips, components of used adhesive and impurity content, which bring the irregular quality and downgrading of board. More over, the board has higher emissivity of formaldehyde than regular board, because recycled chip contains adhesives that were used to make previous products. This low quality of products weakens the price and quality competitiveness, and it led to bringing the issue of problem in Korean board industry. For these reason, in this study, boards using byproducts of plywood were made to evaluate physical and mechanical properties according to manufacturing conditions. As a result, The board was consists of 4~16 mesh chips for core layer and veneer on both face and they were combined using EMDI, and its' bending strength was 57.7 $N/mm^2$ which is 215% higher than that of OSB (26.8 $N/mm^2$). Moreover, the emissivity of formaldehyde was 0.7 ppm, this board seems to substitute OSB for rated sheathing.