• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.547-553
• /
• 2020

As aging infrastructures increase along with time, the efficient maintenance becomes more significant and accurate responses from the sensors are pre-requisite. Among various responses, strain is commonly used to detect damage such as crack and fatigue. Optical fiber sensor is one of the promising sensing techniques to measure strains with high-durability, immunity for electrical noise, long transmission distance. Fiber Bragg Grating (FBG) is a point sensor to measure the strain based on reflected signals from the grating, while Brillouin Optic Correlation Domain Analysis (BOCDA) is a distributed sensor to measure the strain along with the optical fiber based on scattering signals. Although the FBG provides the signal with high accuracy and reproducibility, the number of sensing points is limited. On the other hand, the BOCDA can measure a quasi-continuous strain along with the optical fiber. However, the measured signals from BOCDA have low accuracy and reproducibility. This paper proposed a multi-fidelity data-fusion method based on Gaussian Process Regression to improve the fidelity of the strain distribution by fusing the advantages of both systems. The proposed method was evaluated by laboratory test. The result shows that the proposed method is promising to improve the fidelity of the strain.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.66-72
• /
• 2021

This study developed a species identification method for the salted opossum shrimp of Acetes japonicus, A. chinensis (Korea, China), A. indicus (I, II), and Palaemon gravieri based on PCR-RFLP markers. Genomic DNA was extracted from the salted opossum shrimp. The COI gene was used to amplify 519 base pairs (bp) using specific primers. The amplified products were digested by Acc I and Hinf I, and the DNA fragments were separated by automated electrophoresis for RFLP analysis. When the amplified DNA product (519 bp) was digested with Acc I, A. japonicus, A. chinensis (Korea), and A. indius (II) showed two fragments, whereas a single band of 519 bp was detected in A. chinensis (China) and A. indius (I). Also, in the RFLP patterns digested by Hinf I, A. chinensis (Korea) and A. chinensis (China) showed a single band of 519 bp, while two fragments were observed in A. japonicus and A. indius (I) and four fragments in A. indius (II). The PCR amplicon of P. gravieri was digested by Acc I into 3 bands of 271, 202, and 46 bp and by Hinf I into a single band of 519 bp. Therefore, salted opossum shrimp-specific RFLP markers showing distinct differences between four species and two sub-species by PCR-RFLP analysis. Thus, the PCR-RFLP markers developed in this study are a good method for identifying the six types of salted opossum shrimp.

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.275-283
• /
• 2020

This experiment was conducted to investigate the effect of the addition of enzymes and microorganisms to broiler feed on productivity, carcass characteristics, intestinal microflora, and feces odor. A total of one-hundred eighty 180 chicks (Ross 308) were randomly assigned to 5 treatments with 3 replications each having 12 birds per pen. The experimental group was divided into 0.1% EZ group (0.1% metallo-protease added to the feed), 0.2% EZ group (0.2% metallo-protease added to the feed), M group (2.0% Bacillus veleznesis CE 100 added to the feed), and MW group (2.0% Bacillus veleznesis CE 100 added to the feed and drinking water). In the results, final body weight, body weight gain, the feed conversion ratio, protein efficiency, and energy efficiency were not significantly different among all treatments in across all periods. Carcass weight, proventriculus, gizzard, heart, small intestine, cecum, and rectum weight were not significantly different among all of the treatments. However the liver weight was significantly higher in the 0.1% EZ group than in the control, M and MW groups (P< 0.05). E. coli was significantly lower in MW than in the control and M (P<0.05), and it was significantly higher in the M than 0.2% EZ and MW (P<0.05). H2S emissions in feces was not significantly different among all treatments, but NH3 emissions was were significantly higher in 0.1% EZ than in MW (P<0.05). In conclusion, the addition of 0.1% of metallo-protease was effective in the development of the liver of broilers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.107-120
• /
• 2021

Electric-powered distributed propulsion aircraft possess a complex wake flow and mutual interference with the airframe, due to the use of many propellers. Accordingly, in the early design stage, rapid aerodynamic and load analysis considering the effect of propellers for various configurations and flight conditions are required. In this study, an efficient panel-based aerodynamic analysis method that can take into account the propeller effects is developed and validated. The induced velocity field in the region of propeller wake is calculated based on Actuator Disk Theory (ADT) and is considered as the boundary condition at the vehicle's surface in the three-dimensional steady source-doublet panel method. Analyses are carried out by selecting an isolated propeller of the Korea Aerospace Research Institute (KARI)'s Quad Tilt Propeller (QTP) aircraft and the propeller-wing configuration of the former experimental study as benchmark problems. Through comparisons with the results of computational fluid dynamics (CFD) based on actuator methods, the wake velocity of propeller and the changes in the aerodynamic load distribution of the wing due to the propeller operation are validated. The method is applied to the analysis of the Optional Piloted Personal Aerial Vehicle (OPPAV) and QTP, and the practicality and validity of the method are confirmed through comparison and analysis of the computational time and results with CFD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.27-35
• /
• 2021

Generally, a proper evaluation method of the aging phenomenon of PV modules is required as the electrical performance and lifespan of PV modules can degrade significantly due to several environmental factors, while they are generally known as devices that are used semi-permanently for more than 20 years. On the other hand, there is a lack of objectivity in the existing evaluation method of the aging phenomenon, which compares the adjusted PV output based on STC with the initial PV module specifications due to the data distortion while adjusting the measured data. Therefore, this study implemented a test device for an aging diagnosis to measure and collect actual data from a PV module section and modeled the data for aging using MATLAB S/W to minimize the variability of the PV output, communication error, and delay. Furthermore, this study confirmed the usefulness of the presented test device for aging diagnosis of the PV modules by diagnosing the total period and yearly-basis degradation rate of aging PV modules as 25.73% and 1.55%, respectively, according to the on-site output characteristics of the PV modules by season.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.591-598
• /
• 2021

One of the requirements of metro trains is to stop with precision to ensure that the train can stop precisely at the designated location on the platform. If this is not satisfied, interference with the screen door occurs, causing inconvenience to passengers and delays in operation. In the case of an automatic operated train, the current position is determined by the current speed information of the train, and control is performed by issuing an acceleration/deceleration command. Therefore, accurate control becomes impossible if the error of the speed information is large. In metro railroads, a Precision Stop Marker (PSM) is used to correct the position error, so that the error of stop control can be reduced by correcting the position error at a specific point. On the other hand, because the PSM itself has only position information, it does not compensate for the speed error. This paper proposes a method for performing in-place stop control by estimating the speed with the PSM progress information. The speed can be estimated when the train is operated at a constant deceleration speed, and the target deceleration can be obtained to perform stop control. The feasibility and excellence of the proposed method are shown through a numerical simulation.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.461-466
• /
• 2021

In this article, a portable and cost-effective voltammetric biosensor with nanoparticles was developed for the measurements of heterogeneous nuclear ribonucleoprotein A1 protein (hnRNP A1) biomarker which can potentially be used for lung cancer diagnosis. Gold nanoparticles were first electrodeposited onto screen printed carbon electrode (SPCE) followed by immobilizing a single stranded DNA aptamer specific to hnRNP A1 onto the electrode surface. Ethanolamine was also used when immobilizing DNA aptamer on the surface to prevent signals from non-specific adsorption events. Sequential injection of hnRNP A1 biomarker and anti-hnRNP A1 conjugated with alkaline phosphatase (ALP) onto the aptamer chip surface allows to form the sandwich complex of DNA aptamer/hnRNP A1/ALP-anti-hnRNP A1 on the electrode surface which further reacted with 4-aminophenyl phosphate (APP). The electrocatalytic reaction of the enzyme, ALP, and the substrate, APP, resulting in the oxidative current response changes at -0.05 and -0.17 V (vs. Ag/AgCl) against the hnRNP A1 concentration was measured using cyclic and differential pulse voltammetry, respectively. The Au nanoparticles-integrated voltammetric biosensor was applied to analyze human normal serum solutions possibly suggesting potential applicability for lung cancer diagnosis.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.147-153
• /
• 2011

What kinds of environmental adaptation did people during the Chosun era take when climate change due to drought was perceived and natural disasters occurred? Research hypotheses is 'More environmental improvement projects were conducted when climate disasters were experienced than rituals for rain calling. In this study, frequency samples for Rituals for Rain (RR, 祈雨祭) defined as abnormal climate of drought, Climate Disaster(CD) and Environmental Improvement Projects(EIP) were extracted from "Chosunwangjoshillok(朝鮮王朝實錄)". The analysis among RR, CD, and EIP were studied for a regression model. Research hypothesis was statistically tested. RR took placed the order of Sejong(世宗), Sukjong(肅宗) and Youngjo(英祖), while climate disasters were extracted under the Jungjong(中宗), Sungjong(成宗) and Taijong(太宗). EIP were most active under Youngjo(英祖), Sungjong(成宗) and Taijong(太宗). During the former part of the Chosun dynasty, abnormal climate was more seriously considered than climate disasters, while the opposite pattern was shown during the latter part. In a regression analysis between EIP and CD, the equation of EIP = 0.632CD was determined. As a test result, the study hypothesis the entire Chosun dynasty was dismissed. However, it is possible to statistically support that more EIP were conducted in order to adapt to the climate change during the latter part of the dynasty when climate disaster were experienced.

• Journal of Korean Society of Forest Science
• /
• v.100 no.1
• /
• pp.105-111
• /
• 2011

The purpose of this study was to find out the effect of a torrent control structure using customized tetrapods on the forest water quality conservation and management. The study was conducted in the Honggye valley located in Sanchung-gun, Gyungsangnam-do, and stream water quality was compared before and after construction of torrent control structure. After construction of the torrent control structure using customized tetrapods, pH of stream water didn't get out of the range of River water quality standard class I. After construction of the torrent control structure using customized tetrapods, Dissolved Oxygen concentration didn't change, and Electrical Conductivity measurements agreed well within the range of normal clean stream water quality. After construction of the torrent control structure using customized tetrapods, average of total amount of anion was 3.07/2.30~3.60 mg/L, being slightly greater than before construction. Stream water quality after construction of the torrent control structure was similar to before construction. Therefore, it was find out that the torrent control structure didn't affect stream water quality.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.395-399
• /
• 2011

Material of the gasket for lithium ion battery requires the chemical resistance, the electrical insulting property, the compression set, the anti-contamination level and the low temperature resistance. We compounded ethylene propylene diene monomer (EPDM), which showed widely different solubility parameter index, with adjusting the amount of metal oxide as an activator. We did long-term test and compression set against an electrolyte with consideration for operating conditions in lithium-ion battery. In these tests, we checked the physical, chemical characteristics and the effect to lithium ion battery with different kinds of activators. In case of rubber with ZnO as an activator, through 1000 h depositing test in propylene carbonate which is one of representative solvents, we could get the satisfying characteristics and result. However, $Zn^{2+}$ had eluted in the ion elution test. So, ZnO should be limited in EPDM compound for the gasket material in lithium-ion battery.