• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.265-271
• /
• 2018

This paper presents a method for detecting damage to a structure at low cost using its impedance. The impedance technique is a typical method to detect local damage for structural health monitoring. This is a common technique for estimating damage by monitoring the electro-mechanical admittance signal of the structure. To apply this technique, an expensive impedance analyzer is generally used. On the other hand, it is necessary to develop a low-cost variant to effectively disseminate the technique. In this study, a method based on the transfer impedance using a function generator and digital multimeter, which are generally used in the laboratory instead of an impedance analyzer, was developed. That is, this technique estimates the damage by comparing the damage index using the amplitude ratio of the output voltage measured in the healthy and damaged state. A transfer impedance test was carried out on a steel specimen. By comparing the damage index, the presence of damage could be assessed reasonably. This study is a basic investigation of an impedance-based low-cost damage detection method that can be used effectively for structural health monitoring if supplemented with future research to estimate the damage location and severity.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.497-503
• /
• 2018

A strawberry variety 'Arihyang' was derived as an artificial cross between 'Tochiotome' and 'Seolhyang' in 2014. The seedling and line selections were conducted from 2014 to 2015. Preliminary and advanced yield trials of '14-5-5,' which was the final selected line, were conducted from 2015 to 2017. 'Arihyang' is suitable for forced cultivation and has strong plant vigor, uniformly large-sized fruit, and a high yield compared to those of the check variety, 'Seolhyang' and 'Maehyang.' Especially, vitamin C was at a significant level, which was approximately 15% higher than that of 'Seolhyang.' The average number of flowers per first flower cluster was 10.5, which could reduce the labor of thinning fruit. Its fruit has a conical shape, dark red color, and glossy skin. The fruit was of good quality but has recommendations for harvest at the fully ripened stage. 'Arihyang' has intermediate resistant to phytophthora crown rot, but is susceptible to powdery mildew, gray mold, anthracnose, and fusarium wilt. It is reguired to manage major diseases and pests using optimum cultivation techniques and chemical control.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.576-587
• /
• 2018

This study has focused on analysis factors affecting safety monitoring system at tailings sites, and the evaluation equipment to monitor the factors. Twenty sites at eighteen mines with unsafe conditions were selected to examine the equipment. There were three main factors influenced safety in the sites including surface erosion, piping, and slope instability. In detail, the surface erosion was divided into three sub-factors (planting, soil-topping layer, and tailings), piping into three sub-factors (liner, rain protection facility and leachate), and slop instability was also divided into three sub-factors (slop, concrete wall, and reinforcing wall). As results of in-field measurement, a CCTV was the most effective facility, and electrical resistivity survey, acoustic sensing, thermal liner sensor, structure inclinometer, rainfall meter, and flowmeter were also highly effective. According to applications of the facilities in the unstable tailings, structural defects were mainly found in the piping, which was the most important monitoring factor for safety management of tailings sites.

• Journal of The Korean Society of Emergency Medicine
• /
• v.29 no.5
• /
• pp.423-429
• /
• 2018

Objective: Falling is a common cause of head injury in preschool aged children. We investigated the characteristics of mild head injuries caused by falling and the association between body weight and occurrence of traumatic brain injuries (TBI). Methods: This retrospective observational study was conducted on head-injured preschool-aged children that visited the emergency department from January 2012 to December 2015. Characteristics such as age, sex, weight, free fall height, floor type, and presence of TBI, as defined as cerebral hemorrhage or skull fracture, were investigated. We calculated body weight percentiles by calibrating age and weight and categorized them into four quartile ranges. We grouped all included cases into two groups according to the presence of TBI. The characteristics of the two groups were compared by using chi-square test, and the association with TBI was investigated by using binomial logistic regression. Results: A total of 701 children were included, and TBI was observed in 95 children. Children with TBI were younger. The proportion of children with TBI was higher in the third and fourth quartiles of the body weight group as well as according to soft floor and fall from high height (${\geq}1m$). The odds of soft floor being associated with TBI was higher than the odds for hard floor (odds ratio, 2.734; 95% confidence interval [CI], 1.597-4.680). The odds of high height (${\geq}1m$) being associated with TBI was higher than that for low height (odds ratio, 2.306; 95% CI, 1.155-4.601), and the odds ratio for the weight percentile group was 1.228 (95% CI, 1.005-1.499). Conclusion: Prevalence of TBI after falling in preschool-aged children might be associated with high fall-height and body weight quartiles.

• Journal of Sleep Medicine
• /
• v.15 no.2
• /
• pp.37-42
• /
• 2018

Objectives: To assess the effect and safety of transcranial direct-current stimulation (tDCS) in primary chronic insomnia. Methods: A one-month, double-blind, randomized, sham-controlled trial was performed. A total of 7 patients with primary chronic insomnia received tDCS using anodal (n=3), cathodal (n=2), or sham stimulation (n=2). They were followed up at 1 week and 1 month after treatment. The primary outcome measures included improvement in total sleep time (TST), sleep latency (SL), and sleep efficiency (SE) at 1 month follow-up. Results: TST and SE were improved with tDCS at 1 month follow-up in all patients (100%) of the anodal group, one (50%) of the cathodal group, and one (50%) of the sham group. tDCS improved SL at 1 month follow-up in two patients (67%) of the anodal group, one (50%) of the cathodal group, and none (0%) of the sham group. With respect to adverse events, transient itching sensation occurred in one patient of the anodal group. None of the other groups reported adverse events. Conclusions: Our results suggest that tDCS may be effective and safe for treatment of primary chronic insomnia. A larger controlled study needs to be further investigated.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.576-585
• /
• 2018

Systematic management during the whole life cycle from construction to operation and maintenance is very important for the seven underground pipelines (waterworks, sewerage, electricity, telecommunications, gas, heating, oil including waterworks and sewerage). Especially, it is the construction process that affects the whole life cycle of underground buried pipeline. In order to construct a new city or to maintain different underground pipes, it is always necessary to dig the ground and carry out construction and related work. There is a possibility that secondary and tertiary breaks frequently occur in the pipeline construction process after the piping constructed first in this process. To solve this problem, a system is needed which can monitor damage in real time. However, the supply of electric power for continuous operation of the system is limited according to the environment of underground buried pipelines, so it is necessary to develop a stable electric power supply system using natural energy rather than existing electric power. In this study, we developed a system that can operate the pipeline monitoring system for long time (24 hours and 15 days) using natural energy using wind and solar light.

• Korean Journal of Ichthyology
• /
• v.33 no.3
• /
• pp.167-176
• /
• 2021

This study was carried out to clarify the egg, larvae and juveniles development of Abbottina springeri. For the experiments, the matured adults were collected at the Seowon-cheon, Dangjin-si, Chungcheongnam-do, in Korea. The amount of spawning of female A. springeri was about 1,225~2,100 (1,662±437, n=10). The fertilized eggs were circular in shape and 1.05~1.13 (1.08±0.02, n=30) mm in diameter. The hatching time was required 72 hours to 80 hours after fertilization under water temperature of 22℃. The newly hatched larvae were 2.10~2.23 (2.16±0.04, n=10) mm in total length and had egg yolk in the abdomen but the mouth was not opened. At 5 days after hatching, the preflexion larvae were 3.19~3.30 (3.24±0.03, n=10) mm in total length and the most of yolk-sac was absorbed. At the 15 days after hatching, the flexion larvae were 4.97~5.30 (5.13±0.12, n=10) mm in total length and the tip of the caudal fin was began to bend upward. At the 25 days after hatching, the postflexion larvae were 8.97~9.60 (9.44±0.16, n=10) mm in total length and the tip of the caudal fin was bent at 45°. At the 35 days after hatching, the juvenile were 12.0~13.5 (12.7±0.53, n=10) mm in total length and all fin-rays (iii7 dorsal fin, iii6 anal fin, i7 ventral fins) were reached a constant number of each part.

• Journal of Adhesion and Interface
• /
• v.22 no.2
• /
• pp.57-62
• /
• 2021

Recently, the atomically thin two-dimensional transition-metal dichalcogenides (TMDs) have received considerable attention for the application to next-generation semiconducting devices, owing to their remarkable properties including high carrier mobility. However, while a technique for growing graphene is well matured enough to achieve a wafer-scale single crystalline monolayer film, the large-area growth of high quality TMD monolayer is still a challenging issue for industrial application. In order to enlarge the size of single crystalline MoS₂ monolayer, here, we systematically investigated the effect of process parameters in molten-salt-assisted chemical vapor deposition method. As a result, with optimized process parameters, we found that single crystalline monolayer MoS₂ can be grown as large as 420 ㎛.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.112-119
• /
• 2021

Purpose: This study is based on the detailed inspection data for the last 6 years of fire-fighting high ladder vehicles, fire-fighting inflected ladder vehicles, fire-fighting chemical vehicles and fire-fighting pump vehicles used in front-line fire departments. The purpose is to contribute to the technological development of fire-fighting vehicles by grasping the implementation status of each city and province, the rate of defects, and the occurrence of defects by year. Method: The implementation status by city and province, defect incidence rate, and defect occurrences by year were analyzed. Result: From 2012 to 2017, when the average of 230 or more overhaul vehicles was requested, the results of each city/province show slight fluctuations, but the number of defects gradually decreased due to the old fire-fighting vehicle replacement project and the response of fire vehicle manufacturers. Conclusion: In the case of fire-fighting ladders, the incidence rate of defects was found to be in the order of elevator device, electric device, ladder device, and pneumatic supply device. And in the case of the fire fighting ladder, it was confirmed that the incidence of defects appeared in the order of the refractive ladder, hydraulic cylinder, hydraulic oil, and pneumatic supply device. In the case of fire-fighting chemical vehicles, it was confirmed that defects occurred in the powder fire extinguishing device, fire pump, vacuum pump, and pneumatic supply device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.577-584
• /
• 2021

Electrical energy is an essential component in present societies, which is an important basis for our technological society. In the design of new power infrastructure, it is important to consider the psychological aspects of how our culture considers and aspects its development as an integral component of the community environment. The construction of new high voltage overhead transmission lines has become a controversial issue for public policy of government due to social opposition. The members of community are concerned about how these power lines may have an impact on their lives, basically caused by their effects on health and safety. The landscape and visual impact is one of the most impact that can be easily perceived for local community. The computer 3D simulation of new landscape is illustrated by a real life use corresponding to the selection of the power line route with least observability for local community. This paper used ArcGIS(geographic information system tool) for planning, survey, basic route and detailed route, route for implementation of transmission line corridor. Also, the paper showed the map of natural environment, living environment, safety and altitude using database of power line corridor, and transmission siting model was developed by this study. The suggested landscape of computer simulation with lowest visibility on a power line zone can contribute to reducing oppositions of local community and accelerating the construction of new power lines.