• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.998-1001
• /
• 2002

Micro-LC method for the quantitative determination of hydrogen peroxide in foods has been established. This method was carried out on cation-exchange resin gel column using distilled water as mobile phase with 50 mM sodium sulfate as electrolyte. The detection was performed with an electrochemical detector (ECD) at 0.6 voltage. Under this analytical condition, the recovery rates of hydrogen peroxide in tomato and lemon were 98.3 and 97.4%, respectively. Among 28 food types, hydrogen peroxide concentrations were 0.6, 0.5, 1.9, 0.9, 0.5, 0.6, 0.9, 0.8, and 0.4 ppm in banana, peach, orange, strawberry, pepper, onion, cucumber, burdock, and egg plant, respectively, Whereas none was detected in remaing 19 samples.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1079-1086
• /
• 2000

Pectinesterase inhibitor(PEI) of ripened kiwi fruit(Actinidia chinensis) was separated with affinity chromatography using CNBr-activated Sepharose 4B being covalently bound by orange pectinesterse(PE). The affinity resin strongly and selectively bound PEI, which could be eluted in high yield as a single peak by pH 9.5 without loss of inhibitory activity. The separated PEI had maintained almost inhibitory activity at $-25^{\circ}C$ and $5^{\circ}C$ during 30 days but lost it at room temperature in 4 weeks. The PEI possessed a molecular weight of 16.6 KDa, as estimated by 12.5% SDS-PAGE. PEI had optimum pH of 7.5, optimum temperature of below $10^{\circ}C$ and stability up to $70^{\circ}C$. Also, optimum inhibitory activity for PEI was obtained in 0.2 M NaCl of substrate solutions. The kind of inhibition on tomato pectinesterase was found to be noncompetitive, using citrus pectin as substrate. Fresh orange juice added with crude PEI extracts maintained almost the same cloud stability as pasteurized juice. In case of apple juice, the addition of crude PEI extracts to apple juice had decrease of L-ascorbic acid with nearly no effect on cloud loss.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1114-1121
• /
• 2000

Monascus koji have been used as a natural food colorant and preservative in Asia countries for centuries. This study was investigated to the chemical properties of Doenjang prepared with Monascus koji. Four kinds of Doenjang were fermented with Aspergillus koji only and Aspergillus koji plus 10%, 20% and 30% Monascus koji of its amount, respectively, and the changes of characteristics were investigated during fermentation. All the Monascus koji substituted Doenjang showed lower protease activities than Aspergillus koji Doenjang over all periods of fermentation. No differences of amino nitrogen and free amino acids were found after 30 days of fermentation and reducing sugars and peptides were found during over all periods of fermentation in each other. The Monascus koji gave higher a-, L- and C-values and lower h-values than Aspergillus koji. Sensory profiles of color, flavor, taste and overall quality on the final products which fermented during 60 days, indicated that there were no differences each other. From these results Monascus koji suggested as 30% substitutes for Aspergillus koji in Doenjang preparation.

• Current Research on Agriculture and Life Sciences
• /
• v.20
• /
• pp.71-76
• /
• 2002

The one year old persimmon twigs were collected to know cold tolerance at different temperatures. The selected persimmon cultivar were mast commonly growing in southern part of Korea, such as Bong-Ok, Chungdo-Bansi, Naju-Pasi and Kiwonbang growing at attached farm of Kyungpook Nat. Univ. Browning of bud was the most significant at $-15^{\circ}C$. Naju-Pasi showed no difference in damage between $-5^{\circ}C$ and $-15^{\circ}C$ so called, it is cold tolerant cultivar. Browning of the woody part showed the same tendency with the bud at $-15^{\circ}C$. Chungdo-Bansi was shown the mast weak in cold tolerance than the other cultivars. Electric conductivity was higher at $-15^{\circ}C$ in all persimmon cultivars. Naju-Pasi and Bong-Ok cultivars were weak in cold tolerance even at $-10^{\circ}C$. Bud bursting was occurred at $-15^{\circ}C$ but few on another twigs tested. Naju-Pasi was the lowest while Kiwonbang was higher in the bud bursting. From these result, Naju-Pasi and Bong-ok cultivars were lower in cold tolerance. Kiwonbang cultivar was shown cold tolerance than the other cultivars. These results can be utilized for the persimmon cultivation at different localities in future.

• Journal of Life Science
• /
• v.12 no.1
• /
• pp.87-95
• /
• 2002

It was observed that the hot water extract of the leaves of Capsicum annuum L., a Korean edible plant, had a potent anti-complementary activity. Crude polysaccharide fraction(CAL-0) was obtained by methanol reflux, ethanol precipitation, dialysis and lyophilization. CAL-0 contained 51.8% of total sugar, 8.2% of uronic acid and 16.8% of protein, and consisted of mainly arabinose, galactose and glucose as neutral sugars and galacturonic acid as uronic acid. The anti-complementary activity of CAL-0 decreased greatly by periodate oxidation, but was not changed by pronase treatment. Also, the anti-complementary activity of CAL-0 was reduced partially in the absence of the $Ca^{2+}$ ion. The crude polysaccharide CAL-0 was found to activate the C3 component both in the presence and in the absence of $Ca^{2+}$ through the crossed-immunoelectrophoresis suggesting that those involved in both classical and alternative complement pathway CAL-0 was further separated to an unabsorbed fraction(CAL-1) and six absorbed fractions(CAL-2longrightarrowCAL-7) on DEAE Sepharose CL-6B ion exchange column. Among them four major fractions in activity and yield were obtained, and consisted mainly of arabinose, galactose and glucose with various molar ratios. The major fraction, CAL-2, was purified to give a high molecular fraction(CAL-2-I) and a low molecular fraction(CAL-2-II) on Sepharose CL-6B column. The anti-complementary activity of CAL-2-I, a molecular weight of about 61,000, was higher than it of CAL-2-II.-II.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

With the substantial increase of the size of structure, the management of excavation becomes more difficult. Therefore, massive collapses which are related to retaining wall recently increase. However, since the study on measuring and monitoring the pre-stressing force of anchor is insufficient, behavior of anchor may not be predicted and monitored appropriately by the existing strain gauge and load cell type monitoring system. FBG Sensor, which is smaller than strain gauge and has better durability and does not have a noise from electromagnetic waves, is adapted to measure the strain and pre-stressing force of 7-wire strand, so called smart tendon. A series of pullout tests were performed to verify the feasibility of smart tendon and find out the load transfer mechanism around the steel wire tendon fixed to rock with grout. Distribution of measured strains and estimated shear stresses are compared with those predicted by theoretical solutions. It was found that developed smart tendon can be used effectively for measuring strain of 7-wire strand anchor and theoretical solutions underestimate the magnitude of shear stress and load transfer depth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.702-708
• /
• 2016

The railway signaling system has evolved to maximize its safety and maintainability based on the experiences in the construction and operation of railway systems. The newly developed systems was established to cope with the changes in an operating environment. In the process of a transition to the new system, both the existing ATS (Automatic Train Stop) and new ATP/ATO (Automatic Train Protection/Automatic Train Operation) systems are operating simultaneously in parallel. In this situation, modifications of the conditions of the interlocking diagram and logic are necessarily required on the existing ATS systems due to the frequent improvements in signaling equipment. This paper reports the enhancement of safety and operational efficiency of the system through an improvement of the security and the interlocking conditions of the existing ATS systems. The independent display of signals for each track was ensured to avoid giving the effect of On/Off signals for the selected track on the opposite side, and the security was improved by adjusting the position and interlocking conditions. In addition, the increased traffic density of railway systems was achieved by removing the unnecessary conditions and detailed signal display, which resulted in enhanced operational efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.502-507
• /
• 2016

Vanadium dioxide, $VO_2$, is a thermochromic material that exhibits a reversible metal-insulator phase transition at $68^{\circ}C$, which accompanies rapid changes in the optical and electronic properties. To decrease the transition temperature around room temperature, a number of studies have been performed. The phase transition temperature of 1D nanowire $VO_2$ with a 100 nm diameter was reported to be approximately $29^{\circ}C$. In this study, 1D or 2D nanostructured $VO_2$ was grown using the vapor transport method. Vanadium dioxide has a different morphology with the same growth conditions for different substrates. The 1D nanowires $VO_2$ were grown on a Si substrate ($Si{\setminus}SiO_2$(300 nm), whereas the 2D & 3D nanostructured $VO_2$ were grown on an exfoliated graphene nanosheet. The crystallographic properties of the 1D or 2D & 3D nanostructured $VO_2$, which were grown by thermal CVD, and exfoliated-transferred graphene nanosheets on a Si wafer which was used as substrate for the vanadium oxide nanostructures, were analyzed by Raman spectroscopy. The as-grown vanadium oxide nanostructures have a $VO_2$ phase, which are confirmed by Raman spectroscopy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.94-101
• /
• 2016

With increasing global concerns for environmental impacts, efforts have been made to encourage a modal shift from road freight to an eco-friendly transport system such as rail freight. In Korea, the government has set master plans for a green transport system but has not taken any substantial action to promote rail freight transport. In developing policies and actions to promote rail freight, quantitative studies on environmental impacts among transportation means are essential. This study examined the air pollutant emissions and greenhouse gas (GHG) emissions per unit freight transported by road and rail, respectively. To improve the accuracy, we analyzed emission data and freight transport mileage of rail freight considering diesel locomotives and electric locomotives separately. The results show that unit air pollutant emissions (except SO2) from road freight are about 7~15 times more than those from rail freight. In addition, the GHG emission unit of road freight is about 4 times higher than that of rail freight.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.703-709
• /
• 2017

Korea Utility Helicopter(KUH) is a project to replace the aging helicopter presently being operated by the military with a domestic helicopter. The auxiliary power unit is a device that supplies emergency power to the system by an alternator installed when the main generator fails and the start motor converts the electrical energy of the battery into mechanical rotational energy to rotate the auxiliary power unit engine. With continuing power and operation, defects of the starting motor were found and improvements were carried out to solve it. In the failure mode analysis, the causes of possible defects were classified into 5 categories. Analysis of the 5 factors revealed that the main cause of defects is mechanical wear, which was found to be related to spring pressure. 250 tests were conducted through the theoretically determined pressure and regression analysis was performed with 4 sampling.The results showed that pressure was related to wear rate. In conclusion, early wear and breakage due to wear can be controlled through spring force and test showed the prediction of wear and the validity of the result were confirmed.