• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.287-294
• /
• 2005

In this paper, an optical true time-delay (TTD) for two-dimensional (2-D) phased array antennas (PAAs), composed of a multi-wavelength optical source and a fiber optic delay line matrix consisting of $2\times2$ optical switches with optical fiber connected between cross ports, has been proposed. A 2-bit $\times4-bit$ optical TTD for 10-GHz 2-D PAAs has been implemented by cascading a wavelength dependent TTD (WD-TTD) and a wavelength independent TTD (WI-TTD). The unit time delay for WD-TTD and WI-TTD have been chosen as ${\Delta}T=12ps$ and $\Delta\tau=6ps$, respectively. Time delay have been measured at all radiation angles. The maximum delay error for WD-TTD was measured to be 3 ps due to jitter incurred from gain switching. For the case of WI-TTD, error was within ${\pm}\;1\;ps$. The proposed optical TTD for a 2-D PAA has the following advantages: 1) higher gain compared to one-dimensional linear PAAs, 2) stabilization of optical power and wavelength by using a multi-wavelength optical source, and 3) fast beam scan and simple operation due to electronic control of the $2\times2$ optical switches matrix on a column-by-column basis.

• Plant Journal
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2014

The national capacity of electricity of Korea was 81,737 MW and the peak demand was renewed by the record of 71,230 MW in 2012 which has been increasing since the first lighting ceremony had taken place in the Royal Palace(Kyung-Bok Goong) in 1887. Aa the counteract on the rapid increasing of the demand, Korean government is constructing and operating the high capacity nuclear and thermal power plants, however, the operating reserve on weekdays is small while those of weekends are more than 40% of capacity, so they are providing the pumped-storage power plants with the surplus electricity during weekends and operating the power plants which cost higher production price and located in the capital area with WSS (Weekly Start and Stop) mode including the Seoul Thermal Power Plant. Since the Seoul Thermal Power Plant is spending huge amount of expenses for more than 30 times of the WSS annually due to the high production cost even though it is in Seoul, the core of the demand, I chose the power plant unit #5 which was on the grid in 1969 for the case to confirm reducing 23% of the warm start-up time by applying the "Start-up time management program", and that reducing 35% of the water temperature increasing time by accelerate the increasing rate of the inlet temperature of the water circulating pump.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.22-27
• /
• 2017

Time-encoded near-infrared spectroscopy (NIRS) system is proposed, based on a near-infrared (NIR) swept laser source, for comparison to the conventional NIRS method using a detector-type spectrometer. The cavity of the NIR swept laser source consists of a semiconductor optical amplifier (SOA) with a gain region around 800 nm, and several fiber-optic components. To change the output wavelength in time using an applied electric radio-frequency signal, an acousto-optic tunable filter (AOTF) is introduced in the fiber ring cavity configuration. To demonstrate the feasibility of an NIR swept laser source for NIRS imaging, the spectroscopic comparison of two kinds of absorbance-measuring systems a detector-type spectrometer using a white light source, and a source-type spectrometer using an NIR swept laser is successfully performed with an NIR-absorbing dye.

• Food Science and Preservation
• /
• v.24 no.5
• /
• pp.593-599
• /
• 2017

The objective of this study was to investigate the effect of superheated steam (SHS) and high hydrostatic pressure (HHP) techniques on the improvement of the quality of Bulgogi product during manufacturing process. Bulgogi product was treated with four different cooking/treatment process: conventional cooking (CC), SHS cooking (SHS), CC and then HHP cooking (CC-HHP), and SHS and HHP cooking (SHS-HHP) samples. SHS treated product increased moisture content, and decreased crude protein. Additionally, hardness, gumminess and shear force values were significantly different among the samples (p<0.05). In safety experiment after 14 days of storage at refrigeration temperature indicated that the bacterial population was lower in the case of SHS-HHP as compared to CC-HHP. Changes in texture during the storage periods at $10^{\circ}C$ for SHS-HHP was lowest values with compared to the initial, while shear force values for both tended to decrease with increasing storage period. The TBA and VBN values for SHS-HHP increased to 0.48 ($5^{\circ}C$)-1.68 ($10^{\circ}C$) mg MD/kg and 25.14 ($5^{\circ}C$)-45.14 ($10^{\circ}C$) mg%, respectively after 15 days of storage. Overall, it was found that the combination of SHS and HHP reduced microbial growth, thus leading to improved product quality and sanitation.

• Food Science and Preservation
• /
• v.24 no.5
• /
• pp.600-607
• /
• 2017

This study was conducted to develop radish as a food product for home meal replacement using superheated steam (SHS). Also, the change of quality characteristics was studied during their storage. The radish cuts were treated with SHS for 0, 3, 5, and 7 min, respectively, followed by complete drying at $80^{\circ}C$ for 6 hours. The results showed that radishes restored with mixed solution (drinking water:sugar:vinegar:salt=2:1:0.8:0.1) were harder than those restored with drinking water. All radishes were stored at 5, 10 and $15^{\circ}C$ for 56 days to investigate the changes of quality characteristics during the storage. Radishes in the control group, restored with drinking water and stored at $15^{\circ}C$, were spoiled after 7 days of storage. The radish in the experimental group did not show any change in the water content; except an increase on the first day of storage. The hardness of radish decreased with an increase in the storage period. It was found that microbial growth was inhibited due to low pH of the mixed solution, in which radishes of the experimental group were immerse.

• Clean Technology
• /
• v.21 no.4
• /
• pp.271-277
• /
• 2015

A photocatalyst which mixed by the commercialized P25-TiO₂ and a synthesized Ag_xO was used in an appropriate weight ratio to effectively produce hydrogen gas in this study. The Ag_xOs were synthesized with the conventional sol-gel method, and tetramethylammonium hydroxides were added at the synthesis process in order to stabilize the solutions, and then the solutions were heat-treated at the temperatures of -5, 25, and 50 ℃, resulted to obtain the three types of silver oxides. Physicochemical properties of the synthesized Ag_xOs were identified through X-ray diffraction analysis (XRD), scanning emission microscopy (SEM), ultraviolet-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS). In the photolysis results of water/methanol (weight ratio 1:1) solution, the mixture of P25-TiO₂/Ag_xO exhibited a significantly higher hydrogen gases evolution, compared to that of pure P25-TiO₂. Additionally, the addition of H₂O₂ as an supplement oxidant and in Ag_xO synthesized at 50 ℃ improved the hydrogen production efficiency. In particular, the emitted hydrogen gases reached to 13,000 μmol during 8 hours when a mixed catalyst, Ag_xO of 0.1 g and P25-TiO₂ of 0.9 g, were used.

• Clean Technology
• /
• v.17 no.3
• /
• pp.273-279
• /
• 2011

The physicochemical properties of manufactured nanomaterials can vary depending upon the methods of manufacture, although the utilized raw materials are same. Hence, the toxicity can also vary based on the methods of nanomaterials manufacture. In this study, we compared the toxicity effect of two types of CNTs (MWCNT, multi-walled carbon nanotube; SWCNT, single-walled carbon nanotube) that differ in length and wall number. In case of MWCNTs, inflammatory responses were more strongly induced in longer groups, whereas body weights more clearly decreased in shorter groups. SWCNT significantly decreased the relative weights of brain and kidney, and the inflow of immune cells and the hematological changes were observed significantly on day 1 and day 7 after exposure, respectively. Our results showed that the length and wall number of CNTs can serve as critical factors in the exhibited inflammation and toxicity.

• Clean Technology
• /
• v.19 no.4
• /
• pp.388-392
• /
• 2013

Iindium-tin-oxide (ITO) material was had to use in display application as transparent electrode. However it would be problems comes up, the depletion of indium, tin and energy consumption of production process. Therefore recently trend was demanded alternative ITO material and recycling/reused ITO. In this conditions, the environmental impact have to express correct value about recycling/reused ITO process. The life cycle assessment was valuable method in this process. Thus first step was carried out separating in/out put (material) sources and then, exactive data base (DB) was applied. The result of environment impact was calculated by affect categories and recycling rate was set to 34% (This value was measured in previous project). The rate (g) of ITO material was calculated by chemical equivalent. In result, environmental impact were revealed acidification potential and abiotic depletion and if do not recycle/reuse ITO, $ 476 per 1 ton waste in land.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.155-162
• /
• 2013

Genome-wide association study was performed on data from 266 Hanwoo steers derived from 66 sire using bovine 10K mapping chip in Hanwoo (Korean Cattle). SNPs were excluded from the analysis if they failed in over 5% of the genotypes, had median GC scores below 0.6, had GC scores under 0.6 in less than 90% of the samples, deviated in heterozygosity more than 3 standard deviations from the other SNPs and were out of Hardy-Weinberg equilibrium for a cutoff p-value of $1^{-15}$. Unmapped and SNPs on sex chromosomes were also excluded. A total of 4,522 SNPs were included in the analysis. To test an association between SNP and QTL, GWAS for five genetic mode (additive, dominant, overdominant, recessive and codominant) was implemented in this study. Three SNPs (rs29018694, ss46526851 and rs29018222) at a threshold p< $1.11{\times}10^{-5}$ were detected on BTA12 and BTA21 for dressing percentages in codominant and recessive genetic mode. The G allele for rs29018694 has 4.9% higher dressing percentage than A allele, while the T allele for ss46526851 has 2.57 % higher dressing percentage than C allele. Therefore, rs29018694 SNP showed a bigger effect than the other two SNPs (ss46526851 and rs29018222) in this study. In conclusion, this study identifies three loci with moderate effects and many loci with infinitesimally small effect across genome in Hanwoo.

• Journal of dental hygiene science
• /
• v.16 no.5
• /
• pp.323-330
• /
• 2016

The purpose of this study was to understand the comprehensive relationship among sense of coherence, clinical practice stress, and major satisfaction of students in the department of dental hygiene. From four local universities, departments of dental hygiene were selected: two departments represented a three-year curriculum system and two represented a four-year curriculum system. Data from the final questionnaires of 319 students were analyzed. Differences between variables were analyzed using t-tests and ANOVAs, and correlations were checked using Pearson's correlation coefficients. Path analysis was conducted to analyze the relationship among clinical practice stress, sense of coherence, and major satisfaction. The results indicated that clinical practice stress had a negative influential relationship with both sense of coherence, and major satisfaction. In addition, sense of coherence had a positive influential relationship with major satisfaction. The direct and indirect effects among factors displayed significant differences, indicating that clinical practice stress has a partial mediation effect on sense of coherence and major satisfaction. Therefore, major satisfaction can be increased by developing and implementing programs to improve sense of coherence.