• Parasites, Hosts and Diseases
• /
• v.27 no.4
• /
• pp.231-248
• /
• 1989

The growth and development of the metacercariae of F. seoulensis cultivated in vitro or on the chick chorioallantois were assessed by comparison with the optimum process of maturation in albino rats and new born chickens. The process of maturation was divided for convenience into six stages: Stage 1 ; cell multiplication, Stage 2; body shaping, Stage 3; separation of genital anlagen, Stage :1 organogeny, Stage 5; gametogony, and Stage 6: oviposition. In Hank's and Tyrode's .solutions, the metacercariae were alive up to 200 days or more at $4^{\circ}C$ without any development. The in vivo maturation process in rats or chicks was as follows: stage 1 from 6 hours; stage 2 from 24 hours; stage 3 from 48 to 72 hours; stage 4 from 3 to 4 days; stage 5 from 4 to 5 days; and stage 6 from 5 to 8 days. Despite unsuccessful infection of the metacercariae to 12 day old chicks, fully mature worms of stage 5 or 6 were recovered from new born chicks (1 to 2 days old), The metacercariae of F. seoulensis grown in vitro were up to stage 3 and no further maturation was observed. Of various media employed, the medium NCTC 109 (Gibco) or NCTC 135(Gibco) supplemented with 20% egg yolk or 20% whole egg macerate or 0.5% yeast was basically required for the earlier development of the fluke. It took 16.1 days(in average) to reach the stage 3 after cultivation. The metacercariae cultivated on the chorioallantoic membranes of 6∼13 day old chick embryo at 37∼38℃ showed their full development up to stage 5 or 6. However, the worms were in general remarkably retarded, compared with those grown in rats or chickens. In the experiments of worm transplant, although the transfer was failed from in vitro culture to in vivo of rats(Per os), the transplants from in vitro culture to the chorioallantois and from the choriollantois to in vivo of rat host were successful with or without development of the transferred worms. In the present study, it was observed that the metacercariae of F, seoulensis can be maintained in vitro media with poor development as well as fully matured in 1 to 2 day-old chicks or on the chorioallantois at a very low rate.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.96-108
• /
• 1982

Pinus is one of the most important species supplying domestic industrial timbers such as constitutional lumber, pulpwood, and mine props. It occupies nearly 50 percent of the total forest resources in Korea. With above conception, to develop this forest resources and to obtain the basic data on the reasonable and effective utilization of Pinus, this study was carried out. Five species (P. koraiensis S. et Z., P. densiflora S. et Z., P. thunbergii Parlat, P. densiflara far erecta, P. rigida Miller) grown in Kwangnoong experimental forest stand, Chungcheongnam-Do, and Gangwon-Do regions were selected as sample trees. Anatomical, physical, mechanical and chemical properties of them were investigated.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.1
• /
• pp.9-15
• /
• 2007

Purpose: Repetitive transcranial magnetic stimulation (rTMS) has recently been clinically applied in the treatment of drug resistant depressed patients. There are mixed findings about the efficacy of rTMS on depression. Furthermore, the influence of rTMS on the physiology of the brain is not clear. We prospectively evaluated changes of regional cerebral blood flow (rCBF) between pre- and post-rTMS treatment in patients with drug resistant depression. Materials and Methods: Twelve patients with drug-resistant depression (7 male, 5 female; age range: $19{\sim}52$ years; mean age: $29.3{\pm}9.3$ years) were given rTMS on right prefrontal lobe with low frequency (1 Hz) and on left prefrontal lobe with high frequency (20 Hz), with 20-minute-duration each day for 3 weeks. Tc-99m ECD brain perfusion SPECT was obtained before and after rTMS treatment. The changes of cerebral perfusion were analyzed using statistical parametric mapping (SPM; t=3.14, uncorrected p<0.01, voxel=100). Results: Following areas showed significant increase in rCBF after 3 weeks rTMS treatment: the cingulate gyrus, fusiform gyrus of right temporal lobe, precuneus, and left lateral globus pallidus. Significant decrement was noted in: the precental and middle frontal gyrus of right frontal lobe, and fusiform gyrus of left occipital lobe. Conclusion: Low-frequency rTMS on the right prefrontal cortex and high-frequency rTMS on the left prefrontal cortex for 3 weeks as an add-on regimen have increased and decreased rCBF in the specific brain regions in drug-resistant depressed patients. Further analyses correlating clinical characteristics and treatment paradigm with functional imaging data may be helpful in clarifying the pathophysiology of drug-resistant depressed patients.

• Journal of Nutrition and Health
• /
• v.43 no.6
• /
• pp.588-596
• /
• 2010

Most nutrients taken by pregnant women are secreted into their breast milk. Food contains choline together with betaine, and in human body choline is oxidized to betaine which transfer methyl group. The aim of the study was to estimate the concentrations of choline and betaine in breast milk of Korean lactating women and the choline and betaine intakes of their infants. Total choline, free choline and betaine concentrations in breast milk of some lactating women living in Daejon Metropolitan city were analyzed every month by using HPLC-MS and enzymatic method during the first five months. Total choline concentrations of breast milks were 157.64 mg/L (1.52 mmol/L), 157.83 mg/L (1.52 mmol/L), 165.99 mg/L (1.60 mmol/L), 153.67 mg/L (1.48 mmol/L), 145.05 mg/L (1.39 mmol/L) by month after delivery for five months. The concentrations of total choline and free choline in breast milks were not significantly changed for the five months while the betaine concentrations gradually decreased. Daily intake of total choline of the infants appears to be adequate for the infant's requirement according to the US DRI; 124.6 mg/d, 120.9 mg/d, 126.5 mg/d 104.1 mg/d from 2nd to 5th month after birth. Free choline and betaine intakes of the infants were not significantly changed during the four months except showing decrease in betaine intake per kg body weight. Choline intakes of the infants more correlated with choline concentrations of the breast milks (r = 0.982, p = 0.000) than intake amount of the breast milk (r = 0.414, p = 0.028). These results suggest that the choline intake of Korean breast-fed infants appears to be adequate and the intake could be affected by the choline concentration of the breast milk.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.1
• /
• pp.107-119
• /
• 2014

The purpose of this study is to examine the current status of vascular plants and naturalized plants growing in the Seongeup Folk Village in Jeju and to consider and compare their distribution patterns and the characteristics of emergence of naturalized plants in other folk villages and all parts of Jeju, thereby exploring measures to well manage naturalized plants. The result of this study is as follows.11) The total number of vascular plants growing in Seongeup Folk Village is identified to be 354 taxa which include 93 families, 260 genus, 298 species, 44 varieties and 12 breeds. Among them, the number of naturalized plants is 55 taxa in total including 22 families, 46 genus, 53 species, and 2 varieties, which accounts for 21.7% of the total of 254 taxa identified all over the region of Jeju. The rate of naturalization in Seongeup Folk Village is 15.5%, which is far higher than the rates of plant naturalization in Hahoi Village in Andong, Yangdong Village in Gyeongju, Hangae Village in Seongju, Wanggok Village in Goseong, and Oeam Village in Asan. Among the naturalized plants identified within the targeted villages, the number of those growing in Jeju is 9 taxa including Silene gallica, Modiola caroliniana, Oenothera laciniata, Oenothera stricta, Apium leptophyllum, Gnaphalium purpureum, Gnaphalium calviceps, Paspalum dilatatum and Sisyrinchium angustifolium. It is suggested that appropriate management measures that consider the characteristics of the gateway to import and the birthplace of the naturalized plants are necessary. In the meantime, 3 more taxa that have not been included in the reference list of Jeju have been identified for the first time in Seongeup Folk Village, which include Bromus sterilis, Cannabis sativa and Veronica hederaefolia. The number of naturalized plants identified within the gardens of unit-based cultural properties is 20 taxa, among which the rate of prevalence of Cerastium glomeratum is the highest at 62.5%. On the other hand, the communities of plants that require landscape management are Brassica napus and other naturalized plants, including Cosmos bipinnatus, Trifolium repens, Medicago lupulina, Oenothera stricta, O. laciniata, Lotus corniculatus, Lolium perenne, Silene gallica, Hypochaeris radicata, Plantago virginica, Bromus catharticus and Cerastium glomeratum. As a short-term measure to manage naturalized plants growing in Seongeup Folk Village, it is important to identify the current status of Cosmos bipinnatus and Brassica napus that have been planted for landscape agriculture, and explore how to use flowers during the blooming season. It is suggested that Ambrosia artemisiifolia and Hypochaeris radicata, designated as invasive alien plants by the Ministry of Health and Welfare, should be eradicated initially, followed by regular monitoring in case of further invasion, spread or expansion. As for Hypochaeris radicata, in particular, some physical prevention measures need to be explored, such as for example, identifying the habitat density and eradication of the plant. In addition, it is urgent to remove plants, such as Sonchus oleraceus, Houttuynia cordata, Crassocephalum crepidioides, Erigeron annuus and Lamium purpureum with high index of greenness visually, growing wild at around high Jeongyi town walls. At the same time, as the distribution and dominance value of the naturalized plants growing in deserted or empty houses are high, it is necessary to find measures to preserve and manage them and to use the houses as lodging places.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.581-596
• /
• 1994

This in vitro study was undertaken to obtain optimal tetracycline concentration that aids proliferation and spreading of human periodontal ligament cells, for clinical application in root surfaces of periodontally diseased teeth. Periodontal ligament cells used in this study were obtained from explants of periodontal ligament of 1st premolar teeth which were extracted for the purpose of orthodontic treatment. The cells were cultured in Dulbecco's Modified Eagle Medium(DMEM) supplemented with 100 U/ml penicillin, $100\;{\mu}g/ml$ streptomycin and 10% FBS at $37^{\circ}C$, 100% humidity, 5% $CO_2-95%$ air. Cells were used between the third to 4th passage. After root planing of periodontally extracted teeth, the root slabs were cut with carborundum disk. In the cell proliferation experiment, experimental groups were root planing only group, immersed groups in 25, 50, 75, 100, 150mg/ml aqueous solution of Tetracycline HCl followed by a vigorous rinse in PBS. Human PDL cells at concentration of $1{\times}10^5\;cells/ml$ were seeded in each culture well which contained root slabs and incubated for 6 hours. Then, all of the root slabs were moved into new 24 culture well and incubated 24, 48 and 72 hours. The cell counting was done by inverted phase contrast microscope after trypsinization. The following results were obtained. The cell number was increased in order root planing only group, 25, 150, 50, 75, 100mg/ml of Tetracycline HCl treated group in 24, 48 and 72 hours. The maximal cell number was obtained when the root slabs were immersed in solution with 100mg/ml of Tetracycline HCl. There were statistically significant between the root planing only group and 75, 100 mg/ml of Tetracycline HCl treated group in 24 hours, between the root planing only group and 100mg/ml of Tetracycline HCl treated group in 48 hours, between the root planing only group and 50, 75, 100mg/ml of Tetracycline HCl treated group, between 25 and 100mg/ml of Tetracycline HCl treated group in 72 hours(p<0.05). In the cell spreading experiment, after 30 minutes of incubated, in the root planing only group, the cells were generally round in shape. The cell surface was mostly covered with blebs. The cells started to attach to root surface by cytoplasmic extension in 50, 100mg/ml of Tetracycline HCl treated groups, more numerous cells attached to root surface than root planing only group. Many orifices of dentinal tubule were exposed, cells showed radially spreaded cytoplasm and unspreaded central region of the cell was covered with blebs. After 6 hours of incubation, in the root planing only group, cells showed radially spreaded cytoplasm and were attached flat appearance. In 50, 100mg/ml of Tetracycline HCl treated groups, cellular margin was concaved and cytoplasm showed elongated appearance with polarity. After 24 hours of incubation, in the root planing group, cells showed characteristic polarity. In 50, 100mg/ml of Tetracycline HCl treated groups, cells showed more elongated and spindle - like appearance.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.720-732
• /
• 1995

The use of transforming growth $factor-{\beta}1$ which functions as a potent biologic mediator regulating numerous activities of wound healing has been suggested for the promotion of periodontal regeneration. The mitogenic effects of transforming growth $factor-{\beta}1$ on human periodontal ligament cells and human gingival fibroblasts were evaluated by determining the incorporation of $[^3H]-thymidine$ into DNA of the cells dose-dependently. Cells were prepared with primary cultured fibroblasts and periodontal ligament cells from humans, and used in experiments were the fourth or sixth subpassage. Cells were seeded with serum free Dulbecco's modified Eagle medium containing 0.1% bovine serum albumine. The added concentrations of transforming growth $factor-{\beta}1$ were 0.25, 0.5, 1, 2.5, 5ng/ml and transforming growth $factor-{\beta}1$ were added to the quiescent cells for 24hours, 48hours, 72hours. They were labeled with lnCi/ml $[^3H]$ thymidine for the last 24hour of the each culture. The results were presented as the mean counts per minute (CPM) per well and S.D. of four determinations. The results were as follows. : The DNA synthetic activity of human gingival fibroblasts was increased dose-dependently by transforming growth $factor-{\beta}1$ at 24 hours, 48 hours and 72 hours. The maximum mitogenic effects were at the 48 hour application of transforming growth $factor-{\beta}1$. The DNA synthetic activity was generally more decreased at the 72 hour application than at the 48 hour the application of transforming growth $factor-{\beta}1$. The DNA synthetic activity of human periodontal ligament cells was increased dose-dependently by transforming growth $factor-{\beta}1$ at 24 hours and 48 hours. But the DNA synthetic activity was decreased at 5ng/ml of the 72 hour application. The maximum mitogenic effects were also at the 48 hour application of transforming growth $factor-{\beta}1$. The DNA synthetic activity of human periodontal ligament cells was generally more decreased at the 72 hour application than at the 48 hour application of transforming growth $factor-{\beta}1$. In the comparision of DNA synthetic activity between the human gingival fibroblasts and human periodontal ligament cells, the human gingival fibroblasts had more activity than the human periodontal ligament cells at all time application with the concentration of transforming growth $factor-{\beta}1$. In conclusion, transforming growth $factor-{\beta}1$ has an important roles in the stimulation of DNA synthesis in human periodontal ligament cells and human gingival fibroblasts, which means an increase in collagen synthesizing cells and thus, may be useful for clinical application in periodontal regenerative procedures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.1
• /
• pp.37-48
• /
• 2000

Backgrounds : The pathophysiology of chronic airflow obstruction, such as bronchial asthma, is characterized by mucus hypersecretion, goblet cell hyperplasia(GCH), smooth muscle hypertrophy, and inflammatory cells infiltration. In fatal asthma patients, one distinct findings is mucus hypersecretion due to GCH. However, the mechanisms of GCH in these hypersecretory diseases remain still unknown. In this study, a rat model was rapidly induced with GCH by instillation of $TiO_2$, intratracheally. We intend to confirm GCH and association of concomitant inflammatory cells infiltration and to observe the effect of potent antiinflammatory agent, that is dexamethasone, on GCH with inflammatory cells. Methods : Twenty-one 8-weeks-old male Sprague-Dawley rats were divided into three groups. Endotoxinfree water was instilled intratracheally in group 1(control) ; $TiO_2$, was instilled in the group 2 ; and dexamethasone was injected intraperitoneally to group 3 before $TiO_2$ instillation. After 120 hours, all rats were sacrificed, and trachea, bronchi, and lungs were resected respectively. These tissues were made as paraffin blocks and stained as PAS for goblet cells and Luna stain for eosinophils. We calculated the ratio of goblet cell to respiratory epithelium and number of infiltrated eosinophils from each tissue. Results : (1) Fraction of goblet cells was significantly increased in group 2 than in group 1 in the trachea and in the main bronchus. (10.19$\pm$11.33% vs 4.09$\pm$8.28%, p<0.01 and 34.09$\pm$23.91% vs 3.61$\pm$4.84%, p<0.01, respectively). (2) Eosinophils were significantly increased in the airway of group 2 than that of group 1. (5.43$\pm$3.84% vs 0.17$\pm$0.47 in trachea and 47.71$\pm$16.91 vs 2.71$\pm$1.96 in main bronchi). (3) There was a positive correlation between goblet cells and eosinophils(r=0.719, p=0.001). (4) There was significant difference in the decrease of goblet cells after dexamethasone injection between group 2 and group 3 (p<0.01). Also, infiltration of eosinophils was suppressed by dexamethasone. Conclusion : We made an animal model of $TiO_2$-induced goblet cell hyperplasia. GCH was observed mainly in the main bronchi with concomitant eosinophilic infiltration. Both goblet cell hyperplasia and eosinophilic infiltration were suppressed by dexamethasone. This animal model may serve as a useful tool in understanding of the mechanism of GCH in chronic airway diseases.