• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.97-102
• /
• 2001

Anchors are often used in construction of foundations such as transmission towers to resist uplifting forces. When plate anchors are embedded in soft clay, they may undergo a deformation under the pressure of sustained load. In soft saturated clays, the suction force can be a large par of the ultimate uplift capacity. This study is to present recent laboratory model test results conducted to evaluate the nature of variation of the suction force for plate anchors with shear strength and embedment ratio. The ratio of F$_{s}$Q$_{n}$ versus H/D in bentonite decreases with the increase of the embedment ratio.o.o.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2002.11a
• /
• pp.14-19
• /
• 2002

In this study, as Cu diffusion barrier, tantalum nitrides were successfully deposited on Si(100) substrate and SiO2 by plasma assisted atomic layer deposition(PAALD) and thermal ALD, using pentakis (ethylmethlyamino) tantalum (PEMAT) and $NH_3$ as precursors. The TaN films were deposited on $250^{\circ}$C by both method. The growth rates of TaN films were $0.8{\AA}$/cycle for PAALD and $0.75{\AA}$/cycle for thermal ALD. TaN films by PAALD showed good surface morphology and excellent step coverage for the trench with an aspect ratio of h/w - $1.8 : 0.12 \mu\textrm{m}$ but TaN films by thermal ALD showed bad step coverage for the same trench. The density for PAALD TaN was $11g/\textrm{cm}^3$ and one for thermal ALD TaN was $8.3g/\textrm{cm}^3$. TaN films had 3 atomic % carbon impurity and 4 atomic % oxygen impurity for PAALD and 12 atomic % carbon impurity and 9 atomic % oxygen impurity for thermal ALD. The barrier failure for Cu(200nm)/TaN(l0nm)/$SiO_2(85nm)$/Si structure was shown at temperature above $700^{\circ}$C by XRD, Cu etch pit analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.338-339
• /
• 2005

본 연구에서는 $Fe_2O_3$를 첨가한 $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr_xTi_{1-x})O_3$ 세라믹스에서 Zr/Ti 비 변화에 따른 소결 및 압전, 유전특성을 조사하였다. $0.4Pb(Ni_{1/3}Nb_{2/3})O_3-0.6Pb(Zr_xTi_{1-x})O_3$+0.25Wt% $Fe_2O_3$ 계에서 Zr/(Ti+Zr)비(x)를 0.39에서 0.42까지 변화시킨 조성을 1100 - $1250^{\circ}C$ 온도에서 2시간 소결하여 이의 결정구조 및 미세조직을 분석하였고, 압전, 유전 특성 및 RAINBOW 액츄에이터로의 응용을 조사하였다. $1150^{\circ}C$에서 소결한 0.405 조성(x)에서 유전상수(${\varepsilon}r$) = 4669, 전기기계결합계수(kp) = 0.75, 압전상수($d_{33}$) = 810 pC/N의 우수한 특성 값을 나타내었으며, 닥터블레이드법에 의해 RAINBOW 액츄에이터를 제작하여 변위특성을 조사하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.60.2-60.2
• /
• 2011

본 연구에서는 Indium-free 및 gallium-free 기반의 산화물 TFT를 제작하기 위해 n-type $TiO_2$ 반도체 기반의 thin film transistor ($Mo/TiO_{2-x}/SiO_2/p+\;+Si$)를 oxygen deficient black $TiO_{2-x}$ 타겟을 이용하여 DC magnetron sputtering 공법으로 제작하고 그 특성을 분석하였다. DC magnetron sputtering 공법으로 성막된 $TiO_{2-x}$ semiconductor의 전기적, 광학적, 화학적 결합 에너지 및 구조적 특성 분석을 위해 semiconductor parameter analyzer (Aglient 4156-C), UV/Vis spectrometer, X-ray Photoelectron Spectroscopy, Transmission Electron Microscopy를 각각 이용하여 분석하였으며 이를 RTA 전/후 특성 비교를 통하여 관찰하였다. $TiO_{2-x}$ TFT의 소자 특성은 RTA 열처리 전/후 전형적인 insulator 특성에서 semiconductor 특성으로 변화되는 것을 관찰할 수 있었으며, 최적화된 열처리 공정에서 filed effect mobility 0.69 $cm^2$/Vs, on to off current ratio $2.04{\times}10^7$, sub-threshold swing 2.45 V/decade와 Vth 10.45 V를 확보할 수 있었다. 또한 RTA 열처리 후 밴드갭이 3.25에서 3.41로 확장되는 특성을 나타내었다. 특히 RTA 열처리 후 stoichiometric $TiO_2$ 상태와는 다른 $Ti^{2+}$, $Ti^{3+}$, $Ti^{4+}$ 등의 다양한 oxidation states가 관찰되었으며 이러한 oxidation states를 $TiO_{2-x}$ 박막에서의 oxygen deficient 상태와 연관시킴으로써 oxygen vacancy의 n-type dopant로의 거동을 확인하였다. $TiO_2$ 채널 기반의 TFT 특성을 통하여서 indium free 또는 gallium free 산화물 채널로써의 가능성을 확인하였다.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.451-457
• /
• 2007

Four parallel $A^2/O$ systems maintaining an MLSS of 3,000 mg/L were operated to investigate the effects of varying an HRT of anoxic reactors and packing Bio contact media (BCM, fixed beds) in aerobic reactors on organic matter removal and nitrification/denitrification efficiencies. All systems were operated under conditions that the external recycle ratio was kept 0.5 Q while the internal recycle ratio was changed 1.0 Q to 1.5 Q with that $NH_4-N$ concentration of feed was increased to 40 mg/L by adding $NH_4Cl$. In terms of TSS and TCODcr removal efficiency, both systems with BCM and a system without BCM, respectively, had a similar level of the removal efficiency under varied HRTs of anoxic reactors (0.6 hr, 1.3 hr, 2 hr, 2 hr; control, without BC M) showing that varying an HRT of anoxic reactors did not affect the removal efficiency. While SCODcr removal efficiency of systems with BCM was improved approximately 4~5% at the same HRT of anoxic reactor, the removal efficiency of system with BCM was slightly decreased by reducing an HRT of anoxic reactor. The nitrification efficiency for both systems with BCM and a system without BCM was above 94% showing that packing BCM in aerobic reactors and varying an HRT of anoxic reactors did not affect the efficiency significantly despite of increasing $NH_4-N$ concentration of feed. The denitrification efficiency increased from 81.4% to 85.4% at system with BCM while the efficiency decreased when a shorter HRT of anoxic reactors was kept. The excellent effluent quality for $NO_3-N$ concentration was observed although the $NO_3-N$ concentration increased in anoxic reactors that $NH_4-N$ concentration of feed sufficiently converted into nitrate through nitrification. As a result, packing 20% BCM to an aerobic reactor with HRT of 1.3 hr of anoxic reactor in $A^2/O$ system can achieve a similar level of nitrogen removal efficiency in $A^2/O$ system which the aerobic reactor had no BCM and HRT of 2 hr for anoxic reactor is maintained.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.223-228
• /
• 1996

$SiO_2$ insulator layers on InSb have been prepared by remote PECVD system a low temperature below $200^{\circ}C$. The effects of deposition pressure, temperature, and gas flow ratio on the physical and electrical characteristics of the $SiO_2$ were studied. The InSb MIS device using $SiO_2$ was fabricated and measured its current-voltage and capacitance-voltage characteritance-voltage charateristics at 77K. The films evaluated Auger electron spectroscopy showed that composition atoms were distributed uniformaly throughout the oxide film and the outdiffusion of substrate atoms into the oxide were few. The leakage current density of the MIS device was about 6.26nA/$\textrm{cm}^2$ at 0.75MV/cm , and the breakdown voltage was about 1MV/cm. The interface-stage density at mid-bandgap extracted from 1MHz C-V measurement was $54\times 10^{11}\textrm{cm}^2-2V^{-1}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.6
• /
• pp.350-355
• /
• 2014

Bottom-gate tin oxide ($SnO_2$) thin film transistors (TFTs) were fabricated on $N^+$ Si wafers used as gate electrodes. 60-nm-thick $SnO_2$ thin films acting as active layers were sputtered on $SiO_2/Al_2O_3$ films. The $SiO_2/Al_2O_3$ films deposited on the Si wafers were employed for gate dielectrics. In order to increase the resistivity of the $SnO_2$ thin films, oxygen mixed with argon was introduced into the chamber during the sputtering. The mobility of $SnO_2$ TFTs was measured as a function of the flow ratio of oxygen to argon ($O_2/Ar$). The mobility variation with $O_2/Ar$ was analyzed through studies on crystallinity, oxygen binding state, optical properties. X-ray diffraction (XRD) and XPS (X-ray photoelectron spectroscopy) were carried out to observe the crystallinity and oxygen binding state of $SnO_2$ films. The mobility decreased with increasing $O_2/Ar$. It was found that the decrease of the mobility is mainly due to the decrease in the polarizability of $SnO_2$ films.

• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.27 no.3
• /
• pp.292-300
• /
• 2023

Backgrounds/Aims: Current literature presents limited data regarding outcomes following conversion at the time of minimally invasive pancreaticoduodenectomy (MI-PD). Methods: The National Cancer Database was queried for patients who underwent pancreaticoduodenectomy. Patients were stratified into three groups: MI-PD, converted to open pancreaticoduodenectomy (CO-PD), and open pancreaticoduodenectomy (O-PD). Multivariable modeling was applied to compare outcomes of MI-PD and CO-PD to those of O-PD. Results: Of 17,570 patients identified, 12.5%, 4.2%, and 83.4% underwent MI-PD, CO-PD, and O-PD, respectively. Robotic pancreaticoduodenectomy (R-PD) resulted in a higher lymph node yield (n = 23.2 ± 12.2) even when requiring conversion (n = 22.4 ± 13.2, p < 0.001). Margin positivity was higher in the CO-PD group (26.6%) than in the MI-PD group (21.3%) and the O-PD (22.6%) group (p = 0.017). Length of stay was shorter in the MI-PD group (laparoscopic pancreaticoduodenectomy 10.4 ± 8.6, R-PD 10.6 ± 8.8) and the robotic converted to open group (10.7 ± 6.4) than in the laparoscopic converted to open group (11.2 ± 9) and the O-PD group (11.5 ± 8.9) (p < 0.001). After adjusting for patient and tumor characteristics, both MI-PD (odds ratio = 1.40; p < 0.001) and CO-PD (odds ratio = 1.24; p = 0.020) were significantly associated with an increased likelihood of long-term survival. Conclusions: CO-PD does not negatively impact perioperative or oncologic outcomes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.873-879
• /
• 2003

The study was conducted to improve the nutritive value of defatted rice polishing (DRP). DRP was treated with various concentrations of HCl, NaOH, $H_2O_2$ and Kemzyme-H $F^{(R)} and the effect on its chemical composition and nutritive value in broiler chicks was observed. The treatments levels of 0.4 N HCl, 0.2 N NaOH and 6% $H_2O_2$ were selected from many concentrations of HCl, NaOH and $H_2O_2$ tried earlier on DRP. The selection was made on the basis of release of nutrients from DRP. The Kemzyme-H $F^{(R)} was used at rate of 0.1% of DRP. The selected concentrations of HCl, NaOH, and $H_2O_2$ were then used for treatment of DRP that was used in biological experiments. Two hundred and forty, day-old Hubbard male broiler chicks (38-40 g) were randomly divided into 48 experimental units with five chicks each. Each chemically treated DRP was incorporated into broiler diets at 10, 20 or 30% levels replacing yellow corn from the control feed and thus sixteen experimental feeds were prepared. These feeds were randomly assigned to 48 experimental units such that there were three replicates of chicks on each diet. The results of the study suggest that DRP can be effectively used in broiler diets at 20% level. The best weight gain and feed conversion ratio were observed with diet containing 20% level of DRP treated with 6% $H_2O_2$. The diets containing 30% levels of treated DRP were uneconomical, as excess use of oil was required to compensate the energy needs of the birds.

• Microbiology and Biotechnology Letters
• /
• v.14 no.5
• /
• pp.385-389
• /
• 1986

Both hydrogenase and nitrogenase were found to be involved in hydrogen evolution independently in Rhodopseudomonas sp. KCTC 1437. The hydrogen formation in this bacterium was independent on light illumination and presence of N $H_4^{+}$ After establishment of conditions to measure the amount of hydrogen evolved by each of the enzymes in vivo, the several factors affecting on the hydrogen evolution, e.g. presence of gases ( $C_2$ $H_2$, $H_2$, $O_2$ or $N_2$), C/N ratio, were investigated, Hydrogenase was less inhibited than nitrogenase under $O_2$ and was active independent on the presence of $N_2$ or $C_2$ $H_2$ which were the strong inhibitor of nitrogenase. Besides, the hydrogenase activity was increased after incubation with $H_2$. And it was verified that this bacterium consume hydrogen and photoreduce $CO_2$ by hydrogenase. From above results, it is concluded that hydrogenase in Rhodopseudomonas sp. KCTC 1437 can produce hydrogen under more favorable condition that nitrogenase.e.