• Korean Journal of Plant Resources
• /
• v.24 no.5
• /
• pp.642-649
• /
• 2011

Ginseng growth is largely affected by characteristics of soil in Ginseng field. In this study, we determined the critical ranges of physico-chemical properties of soil for optimization of ginseng growth by analyzing the soils from Anseong and Pocheon regions in Gyeonggi province. Fresh weight of ginseng was 2 to 5 fold higher in good growth field compared to poor growth field within Anseong region. In the case of Pocheon region, 1.5 to 2 fold differences of fresh weight of ginseng was observed between good and poor growth field. These results indicate the difference of ginseng growth even in the same region. Based on these results, critical ranges of physico-chemical properties of soils were determined by comparing the good and poor growth field of each regions, which are follows; more than 50% of soil porosity, 2.0~2.8 g/kg of total nitrogen, 500~900 mg/kg for Av. $P_2O_5$, 2.3~3.5 $cmol_c\;kg^{-1}$ for Exch. Ca in Anseong; less than 13% of liquid phase, 400~650 mg/kg for Av. $P_2O_5$, 4.0~4.7 $cmol_c\;kg^{-1}$ for Exch. Ca, less than 0.8 and 0.5 $cmol_c\;kg^{-1}$ for Exch. Mg and K, respectively, in Pocheon. Interestingly, we found that ginseng growth was affected by exchangeable base ratio (Ca:Mg:K) especially in Anseong region, which were 6:2:1 in good growth field while 4:2:1 in poor growth field. Critical ranges for nutrient contents of ginseng leaves were also characterized, which are less than 0.2% and 0.22% of each P and Mg, respectively, in Anseong, while less than 1.8% and 0.18% of each N and P, respecively, and 1.5~3.0% of K in Pocheon. In addition, we determined critical ranges for inorganic nutrient contents in the current study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.260-267
• /
• 2010

As sloped farmland is subject to runoff and soil erosion and consequently require appropriate vegetative coverage to conserve soil and water, a field study was carried out to evaluate the impact of crop canopy coverage on soil loss and runoff from the experimental plot with three different textural types (clay loam, loam, and sandy loam). The runoff and soil loss were examined at lysimeters with 15% slope, 5 m in length, and 2 m in width for five months from May to September 2009 in Suwon ($37^{\circ}$ 16' 42.67" N, $126^{\circ}$ 59' 0.11" E). Red pepper (Capsicum annum L. cv. Daechon) seedlings were transplanted on three different dates, May 4 (RP1), 15 (RP2), and 25 (RP3) to check vegetation coverage. During the experimental period, the vegetation coverage and plant height were measured at 7 day-intervals and then the 'canopy cover subfactor' (an inverse of vegetation cover) was subsequently calculated. After each rainfall ceased, the amounts of soil loss and runoff were measured from each plot. Under rainfall events >100 mm, both soil loss and runoff ratio increased with increasing canopy cover subfactor ($R^2$=0.35, p<0.01, $R^2$=0.09, p<0.1), indicating that as vegetation cover increases, the amount of soil loss and runoff reduces. However, the soil loss and runoff were depending on the soil texture and rainfall intensity (i. e., $EI_{30}$). The red pepper canopy cover subfactor was more highly correlated with soil loss in clay loam ($R^2$=0.83, p<0.001) than in sandy loam ($R^2$=0.48, p<0.05) and loam ($R^2$=0.43, p<0.1) plots. However, the runoff ratio was effectively mitigated by the canopy coverage under the rainfall only with $EI_{30}$<1000 MJ mm $ha^{-1}hr^{-1}$ ($R^2$=0.34, p<0.05). Therefore, this result suggested that soil loss from the red pepper field could be reduced by adjusting seedling transplanting dates, but it was also affected by the various soil textures and $EI_{30}$.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.21-32
• /
• 2023

Because the application of lithium has gradually increased for the production of lithium ion batteries (LIBs), more research studies about recycling using solvent extraction (SX) should focus on Li⁺ recovery from the waste solution obtained after the removal of the valuable metals nickel, cobalt and manganese (NCM). The raffinate obtained after the removal of NCM metal contains lithium ions and other impurities such as Na ions. In this study, we optimized a selective SX system using di-(2-ethylhexyl) phosphoric acid (D2EHPA) as the extractant and tri-n-butyl phosphate (TBP) as a modifier in kerosene for the recovery of lithium from a waste solution containing lithium and a high concentration of sodium (Li⁺ = 0.5 ~ 1 wt%, Na⁺ = 3 ~6.5 wt%). The extraction of lithium was tested in different solvent compositions and the most effective extraction occurred in the solution composed of 20% D2EHPA + 20% TBP + and 60% kerosene. In this SX system with added NaOH for saponification, more than 95% lithium was selectively extracted in four extraction steps using an organic to aqueous ratio of 5:1 and an equilibrium pH of 4 ~ 4.5. Additionally, most of the Na⁺ (92% by weight) remained in the raffinate. The extracted lithium is stripped using 8 wt% HCl to yield pure lithium chloride with negligible Na content. The lithium chloride is subsequently treated with high purity ammonium bicarbonate to afford lithium carbonate powder. Finally the lithium carbonate is washed with an adequate amount of water to remove trace amounts of sodium resulting in highly pure lithium carbonate powder (purity > 99.2%).

• The Journal of the Petrological Society of Korea
• /
• v.8 no.1
• /
• pp.24-33
• /
• 1999

Differential Strain Analysis (DSA) was performed to examine the characteristics of microcracks for the granites from two sites, Noeunri and Gunggiri. The results of the DSA are taken every 5 MPa for the first 50 MPa, then every 10 MPa to a pressure of 100 MPa, and then every 15 MPa to a pressure of 250 MPa. Differential strain was measured on core samples in three horizontal directions, using $45^{\circ}$ rosette strain gages, and one vertical direction. The gradients of cumulative crack strain curves in one vertical direction and three horizontal directions differed from one another, indicating anisotropic crack development in the sample. The magnitude of vertical cumulative crack strain was the highest, indicating that the microcracks from the studied rock are generally developed in horizontal direction. Under the pressure of 240 Mpa, vertical cumulative crack strains for samples N-1, N-2, G-1, and G-2 were $74{\times}l0^{-6}~820{\times}l0^{-6},\; 190{\times}l0^{-6}~460{\times}l0^{-6},\; 329{\times}l0^{-6}~836{\times}l0^{-6},\; 833{\times}10^{-6}~1,592{\times}l0^{-6}$, respectively. Under the pressure of 25O MPa, volumetric crack strains for Gunggiri and Noeunri ranged from $1,804{\times}10^{-6}\; to\; 3,936{\times}10^{-6}\; and \;from,\; 1, 125{\times}10^{-6}\; to\; 1,457{\times}10^{-6}$, respectively. Therefore, the amount of microcrackes produced were more distributed in Gunggiri than Noeunri. The ratio of a maximum crack strain to a minimum crack strain was calculated to find the orientations between microcracks and the rift plane of the granites. Generally, the ratio has very high values ranging from 2.42 to 3.43, which suggests most microcracks to be intragranular cracks with the regular orientations. These results indicate that the preferred orientations of microcracks in the granites were almost parallel to the rift plane of the granites.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.5
• /
• pp.354-361
• /
• 2008

In this study, we analyzed nutrient cycling structure of a small farm (cattle of 100 heads and arable lands of 2.5 ha) in Jeonnam province to investigate the effects of nutrients input by the addition of bedding materials (sawdust and rice hull) and nutrients loss before the application to the soils (the period during manure storage in the feedlot and composting process) on nutrient cycling structure. Sawdust and rice hull added as bedding materials increased N by 1.6% and 14.2% and $P_2O_5$ by 3.1% and 27.4%, respectively, relative to the amount of nutrients produced by excretion. This result suggests that the addition of nutrients via bedding materials should be considered for better estimation of nutrient balance. The most significant characteristics of the nutrient cycling structure was loss of mass and nutrients during the storage (21 days) and composting period (90 days). During this period, 78.4% of N and 9.5% of $P_2O_5$ was lost from sawdust compost; meanwhile, the percentages of loss for rice hull compost were 81.6% and 10.3%, respectively. A lower percentage of nutrients loss in sawdust compost than that in rice hull compost was attributed to the relatively slow decomposition rate of organic materials in the sawdust compost which has higher C/N ratio and lignin contents. Therefore, it was concluded that estimation of nutrient balance should be conducted based on nutrient contents in the final compost being applied to the lands rather than the amount of nutrients contained in the livestock excretion. In addition, the effects of bedding materials on nutrient losses should be also taken into account.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.395-400
• /
• 2004

The effects of compositions of binders on the rheological properties of mixtures and the preparation conditions on the formation of defects and the debinding characteristics of compacts for the injection molding of ceramic powders (65 wt% aluminaㆍ35 wt% feldspar) were studied. Ceramic powders were coated with 2 wt% of stearic acid and then mixed with 15, 20, and 25 wt% of Paraffin Wax (PW) and High Density Polyethylene (HDPE) as binders at $160^{\circ}C$ for 2 h. Rheological properties were investigated by using capillary rheometer. Apparent viscosities of mixtures were 80∼300 Paㆍs at 1,000$s^{-1}$ of a shear rate, it was good for the injection molding and depending on the compositions of binders. Short shot was formed at 15H5P5 (the ratio of HDPE : PW=5 : 5 in 15 wt% of binders) compacts without injection pressures and any noticeable defects were not formed at 45 kgf/$cm^{2}$ in 20H5P5 compacts. PW and HDPE were removed by the solvent extraction and thermal debinding method. Thermal debinding of HDPE at $450^{\circ}C$ for 5 h, which followed the extraction of PW was using n-heptane solvent at $70^{\circ}C$ for 5 h. Continuous pores in compacts, which facilitate the removal of HDPE by the thermal debinding, were found to form in the compacts when PW was removed by the solvent extraction. The optimum composition of binder at which binder was removed by thermal debinding without defects while maintaining the compact strength was 20H5P5. Bulk density, porosity and 3-point bending strength of 20H5P5 compact sintered at 1,30$0^{\circ}C$ for 5 h were 2.8, < 3%, and 2,400 kgf/$cm^{2}$, respectively, and can be used as a structural materials.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.2
• /
• pp.7-16
• /
• 1997

The food waste composting facility of 10 ton/d capacity at Nanjido has been operated successfully since July, 1996. This study was performed to investigate the characteristics of food waste quality, and variation of physicochemical characteristics of feed materials during composting. Food waste with 79% moisture content was used as a substrate. Wood chip was used as a bulking agent. Monitoring results based on VS, TOC, C/N ratio and gas composition indicated that the facility was operated normally under aerobic conditions. Conductivity values during food waste composting were increased. A highly positive correlation (r=1.00) existed between VS and TOC.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.196-203
• /
• 1999

In this paper, the DS(direct sequence)-CDMA and MC(multi-carrier)-CDMA, which are being researched recently as a synchronous IMT-2000 scheme for next-generation mobile multimedia communications, are studied in terms of BER(bit error rate) performance. The BER performance of MC-CDMA with EGB, MRC, and improved MMSEC detection scheme are analyzed and compared to that of conventional DS-CDMA adopting RAKE receiver through the computer simulations under the environments of synchronous IMT-2000 transmission channel. Not only single user case but also multiuser case is considered in the given system. As a result, it is shown that MC-CDMA with MMSEC detection outperforms all other schemes improved the $E_b/N_o$ by about 5 [dB] and 6 [dB] when the BER is $2{\times}10^{-3}$, for the indoor/outdoor fading channel and synchronous IMT-2000 transmission channel, respectively. Also in the multiuser case, MC-CDMA with MMSEC detection scheme exhibits better performance than all the other schemes.

• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.643-648
• /
• 2013

Activated carbon (AC) was synthesized from rice husks using the chemical activation method with KOH, NaOH, a combination of (NaOH + $Na_2CO_3$), and a combination of (KOH + $K_2CO_3$) as the chemical activating reagents. The activated carbon with the highest surface area (around $2000m^2/g$) and high porosity, which allows the absorption of a large number of ions, was applied as electrode material in electric double layer capacitors (EDLCs). The AC for EDLC electrodes is required to have a high surface area and an optimal pore size distribution; these are important to attain high specific capacitance of the EDLC electrodes. The electrodes were fabricated by compounding the rice husk activated carbons with super-P and mixed with polyvinylidene difluoride (PVDF) at a weight ratio of 83:10:7. AC electrodes and nickel foams were assembled with potassium hydroxide (KOH) solution as the electrolyte. Electrochemical measurements were carried out with a three electrode cell using 6 M KOH as electrolyte and Hg/HgO as the reference electrode. The specific capacitance strongly depends on the pore structure; the highest specific capacitance was 179 F/g, obtained for the AC with the highest specific surface area. Additionally, different activation times, levels of heating, and chemical reagents were used to compare and determine the optimal parameters for obtaining high surface area of the activated carbon.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.67-74
• /
• 1979

Peanut was cultured with varying planting density and sowing date with and without vinyl-film mulching. Vinyl-film mulching raised soil temperature 4.6$^{\circ}C$ higher than the non-mulched during April and early May, but later-on the soil temperature was similar between the two treatments. The ripening and slender grain ratio increased with closer spacing and earlier sowing. Compared with ordinary cultural practices of May 10th sowing without mulching the peanut yield increased by 9% by mulching sown May 10th, and by 49% by mulching and early sowing April 20th.