• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.719-728
• /
• 2019

Valve in water distribution network (WDN), that controls the flow in pipes, is used to isolate a segment (a part of WDN) under abnormal water supply conditions (e.g., pipe breakage, water quality failure event). The segment isolation degrades pressure and water serviceability in neighboring area during the water service outage of the segment. Recent hydraulic and water quality failure events reported encouraging WDN valve installation based on various abnormal water supply scenarios. This study introduces a scenario-based optimal valve installation approach to optimize the number of valves, the amount of undelivered water, and a shortest water supply path indicator (i.e., Hydraulic Geodesic Index). The proposed approach is demonstrated in the valve installation of Pescara network, and the optimal valve sets are obtained under multiple scenarios and compared to the existing valve set. Pressure-driven analysis (PDA) scheme is used for a network hydraulic simulation. The optimal valve set derived from the proposed method has 19 fewer valves than the existing valve set in the network and the amount of undelivered water was also lower for the optimal valve set. Reducing the reservoir head requires a greater number of valves to achieve the similar functionality of the WDN with the optimal valve set of the original reservoir head. This study also compared the results of demand-driven analysis (DDA) and the PDA and confirmed that the latter is required for optimal valve installation.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1329-1350
• /
• 2018

There have been many applications to observe Earth using synthetic aperture radar (SAR) since it could acquire Earth observation data without reference to weathers or local times. However researches about digital map generation using SAR have hardly been performed due to complex raw data processing. In this study, we suggested feasibility of producing digital map using SAR stereo images. We collected two sets, which include an ascending and a descending orbit acquisitions respectively, of KOMPSAT-5 stereo dataset. In order to suggest the feasibility of digital map generation from SAR stereo images, we performed 1) rational polynomial coefficient transformation from radar geometry, 2) digital resititution using KOMPSAT-5 stereo images, and 3) validation using digital-map-derived reference points and check points. As the results of two models, root mean squared errors of XY and Z direction were less than 1m for each model. We discussed that KOMPSAT-5 stereo image could generated 1:25,000 digital map which meets a standard of the digital map. The proposed results would contribute to generate and update digital maps for inaccessible areas and wherever weather conditions are unstable such as North Korea or Polar region.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.166-185
• /
• 2013

After analyzing the location, arrangement, inner structure, and form of the hunting pit in the Bronze Age, this paper sets up three types and talks about types of hunting pits. After analyzing the types of the hunting pit, three types of hunting pits are derived: mountain district - large group's arrangement - long oval - I II type(A), mountain district - arrangement in a line - oval - I type(B), flat area - arrangement in a line - oval - I III type(C). Literature, the ways in hunting pits, the purpose of the installations, and the characters are studied and compared with those of the anthropological cases. Even though hunting pits of types A and B are constructed to hide and get protein and bone of animals for breeding, there are differences in the ways in hunting and characters. Type of A seems to be constructed only for occupation that is the standardized hunting method on a small works. However, type B is the chasing method to hunt as a group and it has various purposes including main occupation. For example, it is for improving the war skills by practicing the hunting strategies and cooperating with the people. In addition, it is for getting a sacrifice for god. The type C hunting pit is estimated that it plays a role to protect themselves from invasion. It's inferred that there are many purposes for military defense and protection of people or animals within the village. It is the reason why the construction is spread in hunting pit including various purposes in the Bronze age that originates in social and economical specialization like the increase in agricultural productivity and appearance of a chief.

• Journal of Korean Society of Archives and Records Management
• /
• v.21 no.3
• /
• pp.99-118
• /
• 2021

As the importance of data grows because of the advent of the next industrial revolution, foreign countries are pushing for long-term data preservation technology research. On the other hand, in Korea, administrative information data sets have been legislated as records management areas without specific long-term preservation measures. As a response, this study conducted basic, cross-validation tests on the Software Independent Archiving of Relational Database (SIARD), which was proposed as an administrative information data set preservation format in several prior works. First, the underlying verification test focuses on deriving the data, structure, and functionality of the data set that SIARD can preserve. The second cross-validation test aimed at verifying the interoperability of SIARD independent of the DBMS class. In addition, two verification tests have confirmed the SIARD feature delivery range. Consequently, the differences between the feature types specified in the SIARD 2.0 standard and those provided by the actual SIARD Suite have been derived. Based on verification test results, we are proposing a development plan to broaden SIARD functionality and set a direction to efficiently enhance SIARD for local situations.

• Journal of Nutrition and Health
• /
• v.54 no.1
• /
• pp.116-128
• /
• 2021

Purpose: The extraction conditions for bioactive components from peanut shells, which is a byproduct of peanut processing, were optimized to enhance the total phenolic content (TPC, Y1), total flavonoid content (TFC, Y2), and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (RSA, Y3). In addition, this study evaluated the anti-obesity effect of peanut shell extract. Methods: Optimization of ultrasonic-assisted extraction (UAE) was performed using a response surface methodology. The independent variables applied for extraction were time (X1: 5.0-55.0), temperature (X2: 26.0-94.0), and ethanol concentration (X3: 0.0%-99.5%). Quadratic regression models were derived based on the results of 17 experimental sets, and an analysis of the variance was performed to verify its accuracy and precision of the regression equations. Results: When evaluating the effects of independent variables on responses using statistically-based optimization, the independent variable with the most significant effect on the TPC, TFC, and RSA was the ethanol concentration (p = 0.0008). The optimal extraction conditions to satisfy all three responses were 35.8 minutes, 82.7℃, and 96.0% ethanol. Under these conditions, the inhibitory activities of α-glucosidase and pancreatic lipase by the extract were 86.4% and 78.5%, respectively. Conclusion: In this study, UAE showed superior extraction efficiency compared to conventional hot-water extraction in the extraction of polyphenols and bioactive materials. In addition, α-glucosidase and pancreatic lipase inhibitory effects were identified, suggesting that peanut shells can be used as effective antioxidants and anti-obesity agents in functional foods and medicines.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.285-294
• /
• 2020

"The Man Standing Next" was a 'anger-character movie' that shows a fierce psychological game between the characters. Inspired by this point, it was analyzed the narrative structure of this film based on scene unit applying the 'Five-stage Anger Model' formulated by Lakoff and Kövecses and others. The results showed that the causality and feasibility of the protagonist's anger behavior were highly reflected above the model. In particular, among the five steps, the film-maker spent the longest time on 'anger control' justifying the hero's motivation for punishment or retaliation, while giving the shortest time to 'loss of control' to maximize the urgentness of the punitive actions. The detonator causing his anger at each stage was disposed two to six times each stage with neglect, contempt, arrogance, ostentation, mockery, unauthorized intervention, etc. Sneering of "Chief Security Officer" and insulting of "The President" make the protagonist feel the scorn of a terrible friend-murderer each functioned as a "rage trigger." In conclusion, the film follows the above sophisticated model in its narrative structure. Though it was a political drama that sets up a lot of anger scheme caused from public reasons, it reflects ordinary people's routine anger, which corresponds to 24 percent of the list of Nobaco's Provocation Inventory (PI). The producers elaborately reflected the anger procedure theory and balanced the public and private drivers of rage. It was considered to be derived from the intention to enhance communication with the audience increasing their understanding and aspiration for political movie that are usually heavy and unfamiliar.

• Journal of Life Science
• /
• v.33 no.8
• /
• pp.623-631
• /
• 2023

This study was conducted to develop microsatellite markers in Parapristipoma trilineatum using next-generation sequencing. A total of 402,244,934 reads were generated on the Illumina Hiseq X Ten System, yielding 60,738,985,034 bp of sequences. The de novo assembly resulted in 1,320,995 contigs. A total of 952,326 contigs (0.016%) including 151 microsatellite loci were derived from the 1,320,995 contigs longer than 640 bp. A total of 34 primer sets were designed from the 151 microsatellite loci. As a result, 15 microsatellite loci were chosen and used for assuming population genetic parameters in the wild and farmed populations. The mean number of effective alleles was 12, ranging from 6 to 25. The observed heterozygosity (H_O) and the expected heterozygosity (H_E) ranged between 0.530 and 0.873, with an average of 0.750, and from 0.647 to 0.895, with an average of 0.793, respectively. According to these results, the developed set of 15 microsatellite markers is expected to be useful for the analysis of genetic characteristics in the population of P. trilineatum in Korea. There are requirements now for further genetic information, fishery resource management, breeding guidelines, support with the selection of breeds and studies on the effects of release, all of which will improve species conservation, and through future research, we aim to offer genetic foundational data with that goal.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.10
• /
• pp.87-97
• /
• 2009

The seismic site coefficients are often used with the seismic hazard maps to develop the design response spectrum at the surface. The site coefficients are most commonly developed deterministically, while the seismic hazarde maps are derived probabilistically. There is, hence, an inherent incompatibility between the two approaches. However, they are used together in the seismic design codes without a clear rational basis. To resolve the fundamental imcompatibility between the site coefficients and hazard maps, this study uses a novel probabilistic seismic hazard analysis (PSHA) technique that simulates the results of a standard PSHA at a rock outcrop, but integrates the site response analysis function to capture the site amplification effects within the PSHA platform. Another important advantage of the method is its ability to model the uncertainty, variability, and randomness of the soil properties. The new PSHA was used to develop fully probabilistic site coefficients for site classes of the seismic design code and another sets of site classes proposed in Korea. Comparisons highlight the pronounced discrepancy between the site coefficients of the seismic design code and the proposed coefficients, while another set of site coefficients show differences only at selected site classes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6C
• /
• pp.367-377
• /
• 2008

As part of study to develop LRFD (Load and Resistance Factor Design) codes for foundation structures in Korea, resistance factors for static bearing capacity of driven steel pipe piles were calibrated in the framework of reliability theory. The 57 data sets of static load tests and soil property tests conducted in the whole domestic area were collected and these load test piles were sorted into two cases: SPT N at pile tip less than 50, SPT N at pile tip equal to or more than 50. The static bearing capacity formula and the Meyerhof method using N values were applied to calculate the expected design bearing capacities of the piles. The resistance bias factors were evaluated for the two static design methods by comparing the representative measured bearing capacities with the expected design values. Reliability analysis was performed by two types of advanced methods: the First Order Reliability Method (FORM), and the Monte Carlo Simulation (MCS) method using resistance bias factor statistics. The target reliability indices are selected as 2.0 and 2.33 for group pile case and 2.5 for single pile case, in consideration of the reliability level of the current design practice, redundancy of pile group, acceptable risk level, construction quality control, and significance of individual structure. Resistance factors of driven steel pipe piles were recommended based on the results derived from the First Order Reliability Method and the Monte Carlo Simulation method.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.296-310
• /
• 1995

Classification of spatial units into meaningful sets is an important procedure in spatial analysis. It is crucial in characterizing and identifying spatial structures. But traditional classification methods such as cluster analysis require an exact database and impose a clear-cut boundary between classes. Scrutiny of realistic classification problems, however, reveals that available infermation may be vague and that the boundary may be ambiguous. The weakness of conventional methods is that they fail to capture the fuzzy data and the transition between classes. Fuzzy subsets theory is useful for solving these problems. This paper aims to come to the understanding of theoretical foundations of fuzzy spatial analysis, and to find the characteristics of fuzzy classification methods. It attempts to do so through the literature review and the case study of urban classification of the Cities and Eups of Kyung-Nam Province. The main findings are summarized as follows: 1. Following Dubois and Prade, fuzzy information has an imprecise and/or uncertain evaluation. In geography, fuzzy informations about spatial organization, geographical space perception and human behavior are frequent. But the researcher limits his work to numerical data processing and he does not consider spatial fringe. Fuzzy spatial analysis makes it possible to include the interface of groups in classification. 2. Fuzzy numerical taxonomic method is settled by Deloche, Tranquis, Ponsard and Leung. Depending on the data and the method employed, groups derived may be mutually exclusive or they may overlap to a certain degree. Classification pattern can be derived for each degree of similarity/distance $\alpha$. By takina the values of $\alpha$ in ascending or descending order, the hierarchical classification is obtained. 3. Kyung-Nam Cities and Eups were classified by fuzzy discrete classification, fuzzy conjoint classification and cluster analysis according to the ratio of number of persons employed in industries. As a result, they were divided into several groups which had homogeneous characteristies. Fuzzy discrete classification and cluste-analysis give clear-cut boundary, but fuzzy conjoint classification delimit the edges and cores of urban classification. 4. The results of different methods are varied. But each method contributes to the revealing the transparence of spatial structure. Through the result of three kinds of classification, Chung-mu city which has special characteristics and the group of Industrial cities composed by Changwon, Ulsan, Masan, Chinhai, Kimhai, Yangsan, Ungsang, Changsungpo and Shinhyun are evident in common. Even though the appraisal of the fuzzy classification methods, this framework appears to be more realistic and flexible in preserving information pertinent to urban classification.