• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.19-30
• /
• 1990

This note describes an application of Hamiton's principle to nonlinear free-surface flow problems. Two functionals are constructed based on classical Hamilton's principle with a modification due to the presence of a free surface. As an effort towards the development of an efficient numerical scheme for our problem, we present the following three test results: i) The bounding principles of the eigenvalues for the linear dispersion relation. ii) By assuming steady solitary waves, an approximate relation between the amplitudes and the speeds of solitary waves are derived from the two functionals constructed. Their numerical results are compared with those of Longuet-Higgins & Fenton(1974). iii) The shapes and charicteristics of solitary waves are computed from two sets of functionals by varying the number of total finite elements in the fluid domain.

• Journal of the Korean Society for Library and Information Science
• /
• v.55 no.4
• /
• pp.115-140
• /
• 2021

This study divided the keyword sets searched from LISTA database focusing on the overseas open access fields into two types (controlled keywords and uncontrolled keywords), and examined the results of performing an intellectual structure analysis based on profiling for the each keyword type. In addition, these results were compared with those of an intellectual structural analysis based on co-word analysis. Through this, I tried to investigate whether similar results were derived from profiling, another method of intellectual structure analysis, and to examine the differences between co-word analysis and profiling results. As a result, there was a similar difference to the co-word analysis in the results of intellectual structure analysis based on profiling for each of the two keyword types. Also, there were also noticeable differences between the results of intellectual structural analysis based on profiling and co-word analysis. Therefore, intellectual structure analysis using keywords should consider the characteristics of each keyword type according to the research purpose, and better results can be expected to be used based on profiling than co-word analysis to more clearly understand research trends in a specific field.

• Journal of Korea Trade
• /
• v.25 no.5
• /
• pp.110-128
• /
• 2021

Purpose - The essential purpose of this study is to analyze the possibility of substitution of an individual job resulting from technological development represented by the 4th Industrial Resolution, considering the different effects of digital transformation on the labor market. Design/methodology - In order to estimate the substitution probability, this study used two data sets which the job characteristics data for individual occupations provided by KEIS and the information on occupational status of substitution provided by Frey and Osborne(2013). In total, 665 occupations were considered in this study. Of these, 80 occupations had data with labels of substitution status. The primary goal of estimation was to predict the degree of substitution for 607 of 665 occupations (excluding 58 with markers). It utilized three methods a principal component analysis, an unsupervised learning methodology of machine learning, and Ridge and Lasso from supervised learning methodology. After extracting significant variables based on the three methods, this study carried out logistics regression to estimate the probability of substitution for each occupation. Findings - The probability of substitution for other occupational groups did not significantly vary across individual models, and the rank order of the probabilities across occupational groups were similar across models. The mean of three methods of substitution probability was analyzed to be 45.3%. The highest value was obtained using the PCA method, and the lowest value was derived from the LASSO method. The average substitution probability of the trading industry was 45.1%, very similar to the overall average. Originality/value - This study has a significance in that it estimates the job substitution probability using various machine learning methods. The results of substitution probability estimation were compared by industry sector. In addition, This study attempts to compare between trade business and industry sector.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.392-396
• /
• 2011

The purpose of this study was to develop the basic wood density (Abbreviated BWD) for Pinus densiflora and to evaluate the applicability of bootstrap simulation method. The data sets were divided into two groups based on eco-types in Korea, one from Gangwon type and the other from Jungbu type. The estimated BWDs derived from bootstrap simulation, which is one of the non-parametric statistics, were 0.418 ($g/cm^3$) in the Pinus densiflora in Gangwon while 0.464 ($g/cm^3$) in the Pinus densiflora in Jungbu. To evaluate the bootstrap simulation, the mean BWD, standard error and 95% confidence interval of probability density were estimated. The number of replication were 100, 500, 1,000, and 5,000 times that showed constant 95% confidence interval, while tended to decrease in terms of standard errors. The results of this study could be very useful to apply basic wood density values to calculate reliable carbon stocks for Pinus densiflora in Korea.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.151-163
• /
• 2021

The main target of this study is to investigate nonlinear transient responses of moving polymer nano-size plates fortified by means of Graphene Platelets (GPLs) and resting on a Winkler-Pasternak foundation under a transverse pressure force and a temperature variation. Two graphene spreading forms dispersed through the plate thickness are studied, and the Halpin-Tsai micro-mechanics model is used to obtain the effective Young's modulus. Furthermore, the rule of mixture is employed to calculate the effective mass density and Poisson's ratio. In accordance with the first order shear deformation and von Karman theory for nonlinear systems, the kinematic equations are derived, and then nonlocal strain gradient scheme is used to reflect the effects of nonlocal and strain gradient parameters on small-size objects. Afterwards, a combined approach, kinetic dynamic relaxation method accompanied by Newmark technique, is hired for solving the time-varying equation sets, and Fortran program is developed to generate the numerical results. The accuracy of the current model is verified by comparative studies with available results in the literature. Finally, a parametric study is carried out to explore the effects of GPL's weight fractions and dispersion patterns, edge conditions, softening and hardening factors, the temperature change, the velocity of moving nanoplate and elastic foundation stiffness on the dynamic response of the structure. The result illustrates that the effects of nonlocality and strain gradient parameters are more remarkable in the higher magnitudes of the nanoplate speed.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.2
• /
• pp.83-90
• /
• 2022

This paper presents the minimum submergence depth of an underwater vehicle that can remove the effect of free surface on the resistance of the underwater vehicle. The total resistance of the underwater vehicle in fully submerged modes comprises only viscous pressure and friction resistances, and no wave resistance should be present, based on the free surface effect. In a model test performed in this study, the resistance is measured in the range of 2 to 10 kn (1.03-5.14 m/s) under depth conditions of 850 mm (2.6D) and 1250 mm (3.8D), respectively, and the residual resistance coefficients are compared. Subsequently, resistance analysis is performed via computational fluid dynamics (CFD) simulation to investigate the free surface effect based on various submergence depths. First, the numerical analysis results in the absence of free surface conditions and the model test results are compared to show the tendency of the resistance coefficients and the reliability of the CFD simulation results. Subsequently, numerical analysis results of submergence depth presented in a reference paper are compared with the model test results. These two sets of results confirm that the resistance increased due to the free surface effect as the high speed and depth approach the free surface. Therefore, to identify a fully submerged depth that is not affected by the free surface effect, case studies for various depths are conducted via numerical analysis, and a correlation for the fully submerged depth based on the Froude number of an underwater vehicle is derived.

• Journal of The Korean Astronomical Society
• /
• v.54 no.4
• /
• pp.113-119
• /
• 2021

It is difficult for observers to conduct an optical alignment at an observatory without the assistance of an optical engineer if optomechanical parts are to be replaced at night. We present a practical tilt correction method to obtain the optimal optical alignment condition using the symmetricity of optical aberrations of a wide-field on-axis telescope at night. We conducted coarse tilt correction by visually examining the symmetry of two representative star shapes obtained at two guide chips facing each other, such as east-west or north-south pairs. After coarse correction, we observed four sets of small stamp images using four guide cameras located at each cardinal position by changing the focus positions in 10-㎛ increments and passing through the optimum focus position in the range of ±200 ㎛. The standard deviation of each image, as a function of the focus position, was fitted with a second-order polynomial function to derive the optimal focus position at each cardinal edge. We derived the tilt angles from the slopes converted by the distance and the focus position difference between two paired guide chip combinations such as east-west and north-south. We used this method to collimate the on-axis wide-field telescope KMTNet in Chile after replacing two old focus actuators. The total optical alignment time was less than 30 min. Our method is practical and straightforward for maintaining the optical performance of wide-field telescopes such as KMTNet.

• Geomechanics and Engineering
• /
• v.28 no.1
• /
• pp.11-23
• /
• 2022

The response of pile foundations under lateral loads are usually analyzed using beam-on-nonlinear-Winkler-foundation (BNWF) model framework employing various forms of empirically derived p-y curves and p-multipliers. In practice, the p-y curve presented by the American Petroleum Institute (API) is most often utilized for piles in granular soils, although its shortcomings are recognized. The objective of this study is to evaluate the performance of the BNWF model and to quantify the error in the estimated pile response compared to a rigorous numerical model. BNWF analyses are performed using three sets of p-y curves to evaluate reliability of the procedure. The BNWF model outputs are compared with results of 3D nonlinear finite element (FE) analysis, which are validated via field load test measurements. The BNWF model using API p-y curve produces higher load-displacement curve and peak bending moment compared with the results of the FE model, because empirical p-y curve overestimates the stiffness and underestimates ultimate resistance up to a depth equivalent to four times the pile diameter. The BNWF model overestimates the peak bending moment by approximately 20-30% using both the API and Reese curves. The p-multipliers are revealed to be sensitive on the p-y curve used as input. These results highlight a need to develop updated p-y curves and p-multipliers for improved prediction of the pile response under lateral loading.

• Journal of Fashion Business
• /
• v.25 no.5
• /
• pp.73-87
• /
• 2021

This study aimed to develop fashion designs by applying the PO (Provocative Operation) method as a 3D virtual clothing program and to derive the PO application method in fashion design. The first T-shirt design was presented as an existing thinking method, and the second design was developed by applying escape, reversal, exaggeration, distortion, and hopeful thinking techniques, which are techniques for 'provocation' of the PO method, to the first design. Thus, 18 T-shirt designs were developed as 3D virtual clothing, with 3 sets of 6 designs, including the 1st and 2nd designs. The method of using the 'provocation' techniques of the PO method in the development of fashion design derived from this was as follows. First, the 'escape' technique was designed in such a way that a part of the detail or structure was deleted, or a part of the structure or expression element of another item was applied. Second, the 'inversion' technique was expressed by inverting the position or shape of a detail or structure up, down, left, and right; fitting the structural detail or reversing the shape; or converting the structure and form. Third, the 'exaggeration' technique exaggerated the size, length, and volume of a structure's form or detail. Fourth, the 'distortion' technique was expressed as a distortion of lines or shapes or a visual distortion using the Trompe l'oeil technique. Fifth, the 'hopeful thinking' technique was developed and expressed from the idea of an hypothetical 'if' it was absurd, irrational, and unrealistic.

• Mass Spectrometry Letters
• /
• v.13 no.3
• /
• pp.49-57
• /
• 2022

During electrospray ionization mass spectrometry (ESI-MS) analysis of proteins, the addition of supercharging agents allows for adjusting the maximal charge state, affecting the charge state distribution, and increases the number of ions reaching the detector thus, improving signal detection. We postulate that in di-substituted arene isomers, molecules with higher polarizability values should generate greater interactions and hence elicit higher signal intensities. Polarizability is an electronic parameter which has been demonstrated to predict many chemical interactions. Many properties can be predicted based on charge polarization. Molecular polarizability is a vital descriptor for explaining intermolecular interactions. We employed DFT (density functional/Hartree-Fock hybrid model, B3LYP)-derived descriptors and computed molecular polarizability for ten disubstituted arene reagents, each set made up of three (ortho, meta, para) isomers, with reported use as supercharging reagents during ESI experiments. The atomic electronic inputs were ionization potential (IP), electron affinity (EA), electronegativity (𝛘), hardness (η), chemical potential (µ), and dipole moment (D). We determined that the para isomers showed the highest polarizability values in nine of the ten sets. There was no difference between the ortho and meta isomers. Polarizability also increased with increasing complexity of the substituents on the benzene ring. Polarizability correlated positively with IP, EA, 𝛘, η, and D but correlated negatively with chemical potential. This DFT study predicts that the para isomers of di-substituted arene isomers should elicit the strongest ESI responses. An experimental comparison of the three isomers, especially of larger supercharging molecules, could be carried out to establish this premise.