DOI QR코드

DOI QR Code

Effect of Free Surface Based on Submergence Depth of Underwater Vehicle

  • Youn, Taek-Geun (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Kim, Min-Jae (Agency for Defence Development) ;
  • Kim, Moon-Chan (Department of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Kang, Jin-Gu (Department of Naval Architecture & Ocean Engineering, Pusan National University)
  • Received : 2021.11.09
  • Accepted : 2022.03.31
  • Published : 2022.04.30

Abstract

This paper presents the minimum submergence depth of an underwater vehicle that can remove the effect of free surface on the resistance of the underwater vehicle. The total resistance of the underwater vehicle in fully submerged modes comprises only viscous pressure and friction resistances, and no wave resistance should be present, based on the free surface effect. In a model test performed in this study, the resistance is measured in the range of 2 to 10 kn (1.03-5.14 m/s) under depth conditions of 850 mm (2.6D) and 1250 mm (3.8D), respectively, and the residual resistance coefficients are compared. Subsequently, resistance analysis is performed via computational fluid dynamics (CFD) simulation to investigate the free surface effect based on various submergence depths. First, the numerical analysis results in the absence of free surface conditions and the model test results are compared to show the tendency of the resistance coefficients and the reliability of the CFD simulation results. Subsequently, numerical analysis results of submergence depth presented in a reference paper are compared with the model test results. These two sets of results confirm that the resistance increased due to the free surface effect as the high speed and depth approach the free surface. Therefore, to identify a fully submerged depth that is not affected by the free surface effect, case studies for various depths are conducted via numerical analysis, and a correlation for the fully submerged depth based on the Froude number of an underwater vehicle is derived.

Keywords

Acknowledgement

This study was supported by the Basic Research Support Program (2-year program) of Pusan National University.

References

  1. Choi, H.S., & Kim, J.Y. (2012). Status and Prospect of R&D of Unmanned Submersible Vehicles (AUV). Bulletin of the Society of Naval Architects of Korea, 49(3), 25-30.
  2. Moonesun, M. (2009). Handbook of Naval Architecture Engineering. Kanoon Pajohesh., Isfahan.
  3. Rawson, K.J., & Tupper, E.C. (2001). Basic Ship Theory (5th ed.). Butterworth-Heinemann.
  4. Jackson, H.A. (1982). Submarine Design Notes. Massachusetts Institute of Technology.
  5. Moonesun, M., Javadi, M., Charmdooz, P., & Mikhailovich, K.U. (2013). Evaluation of Submarine Model Test in Towing Tank and Comparison with CFD and Experimental Formulas for Fully Submerged Resistance. Indian Journal of Geo-Marine Sciences, 42(8), 1049-1056.
  6. Javadi, M., Manshadi, M.D., Kheradmand, S., & Moonesun, M. (2015). Experimental Investigation of the Effect of Bow Profiles on Resistance of an Underwater Vehicle in Free Surface Motion. Journal of Marine Science and Application, 14, 53-60. https://doi.org/10.1007/s11804-015-1283-0
  7. Mansoorzadeh, Sh., & Javanmard, E. (2014). An Investigation of Free Surface Effects on Drag and Lift Coefficients of an Autonomous Underwater Vehicle (AUV) Using Computational and Experimental Fluid Dynamics Methods. Journal of Fluids and Structures, 51, 161-171. https://doi.org/10.1016/j.jfluidstructs.2014.09.001
  8. Nematollahi, A., Dadvand, A., & Dawoodian, M. (2015). An Axisymmetric Underwater Vehicle-Freesurface Interaction: A Numerical Study. Ocean Engineering, 96, 205-214. https://doi.org/10.1016/j.oceaneng.2014.12.028
  9. Jagadeesh, P., & Murali, K. (2010). RANS Predictions of Free Surface Effects on Axisymmetric Underwater Body. Journal of Engineering Applications of Computational Fluid Mechanics, 4(2), 301-313. https://doi.org/10.1080/19942060.2010.11015318
  10. Byeon, C.Y., Kim, J.I., Park, I.R., & Seol, H.S. (2018). Resistance and Self-propulsion Simulations for the DARPA Suboff Submarine by Using RANS Method. Journal of Computational Fluids Engineering, 23(3), 36-46. https://doi.org/10.6112/kscfe.2018.23.3.036