• Computers and Concrete
• /
• v.22 no.1
• /
• pp.11-25
• /
• 2018

A numerical approach for the evaluation of the flexural response of Steel Fibrous Concrete (SFC) cross-sections with arbitrary geometry, with or without conventional steel longitudinal reinforcing bars is proposed. Resisting bending moment versus curvature curves are calculated using verified non-linear constitutive stress-strain relationships for the SFC under compression and tension which include post-peak and post-cracking softening parts. A new compressive stress-strain model for SFC is employed that has been derived from test data of 125 stress-strain curves and 257 strength values providing the overall compressive behaviour of various SFC mixtures. The proposed sectional analysis is verified using existing experimental data of 42 SFC beams, and it predicts the flexural capacity and the curvature ductility of SFC members reasonably well. The developed approach also provides rational and more accurate compressive and tensile stress-strain curves along with bending moment versus curvature curves with regards to the predictions of relevant existing models.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.104-107
• /
• 1999

Tracking control of an arbitrary reference has been discussed for 7Th order 2-input 2-output non-minimum phase EGR/VGT diesel engines. To meet strict emission regulations and customer demands, the desired set points, the air-fuel ratio and the ERG flow fraction, determined from a static engine data based on engine speed and the desired fueling rate are transformed into the set points for the two sensor measurement outputs. Applying the sliding mode tracking control theory proposed by Jeong and Utkin, two step design was carried out using the bounded solution of an unstable zero dynamics for the given reference signals. This paper shows through simulations how stabilization of unstable zero dynamics and reference tracking can be accomplished simultaneously.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.502-509
• /
• 1996

This paper is a survey on the characteristics of reduplication in Bahasa Indonesia(B1). B1 abound in reduplicated sound-symbolic expressions. like Japanes and Korean, as such reduplication is considered as one of the significant morphological processes in B1. Despite the huge number of these expressions in B1. scholarship has not hitherto paid much of attentions to their non-arbitrary characteristics nor has not explained their iconicity systematically so far. This study concerns about the needs to describe the iconic patterns of reduplication in the grammar of B1. Firstly, tense-iconicity could be shown in verbal reduplicatives. Secondly, idiomatic reduplicatives could be considered as the remnants of diachronic reduplicated sound-symbolid expressions. The iconicity of reduplication of B1 must be described in a distinct component of the grammar of B1. As one of the simple-structured languages in the world. B1 shows iconic patterns, being fundamentally language-specific, in the grammar. But at the moment, we do not have the formal lingustic tools necessary for describing iconicity. This problem could probably be solved by modifying formal conventions about rules and features.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.602-608
• /
• 2016

The paper proposes a practical meshless method for the free vibration analysis of clamped plates having arbitrary shapes by extending the non-dimensional dynamic influence function (NDIF) method, which was developed by the author in 1999. In the proposed method, the domain and boundary of the plate of interest are discretized using only nodes without elements unlike FEM and the system matrices are obtained by making domain nodes and boundary nodes satisfy the governing differential equation and boundary conditions, respectively. However, since the above system matrices are not square ones, the problem of free vibrations of clamped plates is not reduced to an algebraic eigenvalue problem. An additional theoretical treatment is considered to produce an algebraic eigenvalue problem. It is revealed from case studies that the proposed method is valid and accurate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.150-156
• /
• 1995

In the finite element analysis of metal forming processes, the updated Lagrangian approach has been widely and effectively used to simulate the non-steady state problems. However some difficulties have arisen from abrupt flow change as in extrusion through square dies. In the present work, a ALE(arbitrary Lagrangian-Eulerian) finite element formulation for deformation analysis are presented for rigid viscoplastic materials. The developed finite element program is applied to the analysis of square die extrusion of a square section. The computational results are compared with those from the updated Lagrangian finite element analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.19-19
• /
• 2002

In this paper the authors explore the effect of bandwidth sharing to the utility of the customer for the best-effort Internet services and draw a basis for the pricing principle in Internet Protocol networks. Especially, we investigate the behavior of a customer′s utility in case an arbitrary amount of additional bandwidth is allowed to each customer for the elastic traffic, which is the typical example of the non-real time Internet data traffic. After drawing the utility curve, which will be proved to follow the concave curve, we will apply it to the pricing of Internet traffic. Finally, via numerical experiments, we will illustrate the validity and implication of the proposed method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.277-284
• /
• 2002

In this paper the authors explore the effect of bandwidth sharing to the utility of the customer for the best-effort Internet services and draw a basis for the pricing principle in Internet Protocol networks. Especially, we investigate the behavior of a customer's utility in case an arbitrary amount of additional bandwidth is allowed to each customer for the elastic traffic, which is the typical example of the non-real time Internet data traffic. After drawing the utility curve, which will be proved to follow the concave curve, we will apply it to the pricing of Internet traffic. Finally, via numerical experiments, we will illustrate the validity and implication of the proposed method.

• Journal of applied mathematics & informatics
• /
• v.35 no.3_4
• /
• pp.267-276
• /
• 2017

The purpose of this paper is to investigate the local asymptotic stability of equilibria, the periodic nature of solutions, the existence of unbounded solutions and the global behavior of solutions of the fractional difference equation $$x_{n+1}=\frac{^{{\alpha}x}n-1(k+1)}{{\beta}+{\gamma}x^p_{n-k}x^q_{n-(k+2)}}$$, $$n=0,1,{\dots}$$ where the parameters ${\alpha}$, ${\beta}$, ${\gamma}$, p, q are non-negative numbers and the initial values $x_{-(k+2)}$,$x_{-(k+1)}$, ${\dots}$, $x_{-1}$, $x_0{\in}\mathb{R}^+$.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.300-303
• /
• 2008

In the present study, the simple form of the heat transfer equation were suggested to estimate the temperature variation inside the oil pipe in order to determine the thickness of the insulating materials to retain the working oils below the critical temperature. The conservation of the thermal energy at arbitrary time were modeled to one dimensional unsteady equation with the empirical formula or data. The calculating results for non-insulation case showed that the temperature were very sensitive to the thermal convection by the velocity of the external wind. For insulation case, the insulation material which has higher density and specific heat, lower thermal conductivity should be chosen with more brighter coloring outside the pipe in order to retain the working oils below the critical temperature.

• Journal of applied mathematics & informatics
• /
• v.18 no.1_2
• /
• pp.247-259
• /
• 2005

Necessary and sufficient conditions, under which there exists (at least) a sequence of vectors of real numbers for which the distribution function (d.f.) of any vector of extreme order statistics converges to a non-degenerate limit, are derived. The interesting thing is that these conditions solely depend on the univariate marginals. Moreover, the limit splits into the product of the limit univariate marginals if all the bivariate marginals of the trivariate d.f., from which the sample is drawn, is of negative quadrant dependent random variables (r.v.'s). Finally, all these results are stated for the multivariate extremes with arbitrary dimensions.