• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.

• Archives of design research
• /
• v.17 no.2
• /
• pp.43-54
• /
• 2004

The appreciation of cultural properties related with what the aspects of society was is mandatory to understand our culture correctly. To make over all cultural properties to our descendants without breakage or damage is our natural duty and national obligation. On the contrary, inhabitants in the preserved area should be restricted and controlled by the cultural property law. The conflict between the inhabitants in the preserved area and the government raises economical problems and damages all the time. Especially it is time to discuss to mediate between them and solve the problems. This feasible study is a proposal to settle them up through renovating abolished school in the preserve area to the museum and a case to preserve the cultual properties as well as habitant's assets in that area.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.137-145
• /
• 2020

The recent bridge construction projects demand thorough and systematic safety and risk management, due to the increase of risk factors following the introduction of new and complex construction methods and technologies. Among many types of damages that can occur in bridge construction projects, the damages to third parties who are not directly related to the existing property of the contractor construction project can also bring about critical loss in the project in order to compensate the damages. Therefore, risks that could be caused by the loss occurred to indemnify the third party damages should be clearly analyzed, although there are not subsequent amount of studies focusing on the issue. Based on the past record of insurance payment from domestic insurance companies for bridge construction projects, this study aimed to analyze the risk factors of bridge construction for loss caused to compensate the third-party damages happened in actual bridge construction projects and to develop a quantified and numerical predictive loss model. In order to develop the model, the loss ratio was selected as the dependent variable; and among many analyzed independent variables, the superstructure, foundation, flood, and ranking of contractors were the four significant risk factor variables that affect the loss ratio. The results produced can be used as an essential guidance for balanced risk assessment, supplementing the existing analysis on material losses in bridge construction projects by taking into account the third-party damage and losses.

• Korean Journal of Pharmacognosy
• /
• v.35 no.3 s.138
• /
• pp.207-214
• /
• 2004

This study was investigated antioxidatve activity for the purpose of developing antioxidant from Morus bombycis Koidzumi. Antioxidant activities of four different organs of Morus bombycis Koidzumi such as fruit, leaf, stem, and root were examined by radical scavenging effect with 1,1-diphenyl-2-picrylhydrazyl (DPPH). 80% methanol extract from the stem showed strongly antioxidative activity and 80% Ethanol extracts from the root, stem, and fruit had high antioxidative activity among 24 samples tested. The 80% ethanol extract has strong absorbency at UVA region (350 nm). The ethyl acetate (EtOAc) fraction exhibited antioxidative activity with $IC_{50}$ of $15.0\;{\mu}g/ml$ similar to those of synthetic antioxidant, BHT The EtOAc fraction has a good absorbency property as synthetic filter. In the absorbance of various extracts, the 80% ethanol and ethyl acetate extracts from the root of Morus bombycis Koidzumi showed higher absorbancy at 285 nm. The ethyl acetate fraction from the root of Morus bombycis Koidzumi contained total phenolic compounds of 654.8 mg/100 g. These results indicate that phenolic compounds are the major was biological components in the root of morus bombycis Koidzumi extracts. Considering these biological activities, the extracts of Morus bombycis Koidzumi showed a possibility to be used as a new material for natural anti-oxidants and substitutes for synthetic UV sunscreen agents.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2011

Speeding is a major cause of traffic accidents that affects the safety of pedestrians and harms drivers and their families, property and mental health. However, most researches on speeding behavior have been conducted by survey method, so the relationship between cause and effect is not clear. The reliability of the research cannot be carefully examined because most researches involve retrospective methods. It is clear that conducting experimental research is important for overcoming these limitations, but it is impossible to perform tests with real cars in real traffic situations due to the inability to control situational factors (e.g., other vehicles, traffic signal) which affect participants' behavior. A car simulator experiment was designed and the theory of planned behavior was applied to the experiment. Each participant was grouped and assigned to either high speeding intention group or low speeding intention group according to their levels of speeding intention and analyzed the difference of driving behavior indexes between two groups. The results revealed statistically significant differences between two groups on driving speed, speeding frequency, and accelerator pressure deviation. Finally, the limitations and the implications of this study were discussed.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.511-517
• /
• 2010

Dissolution procedure of vanadium pentoxide, which is widely used as a catalyst for production of sulfuric acid or an oxide reaction of the numerous organic compounds, was investigated. Reagent of vanadium pentoxide was completely dissolved in aqua regia-$H_2O_2$-HF solution, but plate type of vanadium pentoxide sample was not clearly dissolved with mixed acids. Thus, in order to establish the dissolution procedure for plate type of vanadium pentoxide, the solubility of vanadium pentoxide was investigated through comparison of acid treatment-fusion and microwave digestion methods. The optimized acid for dissolution of vanadium compound was found to be mixing acids of aqua regia, $H_2O_2$ and HF. Acid-fusion and microwave digestion methods have a similar property in the solubility of vanadium compound, but the latter was more quick and convenient procedure. The content of vanadium pentoxide was found to be $97.9{\pm}0.9%$ using an inductively coupled plasma atomic emission spectrometer after dissolution of a sample with the microwave digestion system.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.329-338
• /
• 2014

Today, one of the important factors that determine the university rating is the employment rate. The jobseekers are using online or offline recruiting services in order to get the desired job information. There are lots of employment supporting systems as like web-based employment agencies and University's job centers, but they are focusing more on providing job information rather than on managing the employment support. In addition, those are insufficient to support business process associated with MOU companies, industry field training, mentoring processors, etc., and to continue to manage and to update the information (resume, personal statement, etc.) about the students which the companies want, and the information about the companies which jobseekers want. Therefore, it is required that the employment supporting system which not only storages the initial data (student and corporate information), but also assist the career placement. In this paper, we considered the specific employment rights management features of the existing employment support system, it could receive real-time job information in the smart phone, we presented the design and construction of the system linked to the Bachelor Information System.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.465-467
• /
• 2015

This paper implements a dual-mode power strip controller (PSCtrl) with environmental sensors which cooperates with Android-based smartphones. According to the statistics on fires in housing facilities, unidentified electrical fires account for 23.4%. In order to reduce these fire accidents caused by user carelessness and protect life and property, smart power control techniques with improved user convenience are required. For this reason, the implemented dual-mode PSCtrl controls ON-OFF operations of a power strip in two ways (e.g. manual and automatic modes) by cooperating with Android-based smartphones provided with environmental data from light, temperature, and humidity sensors. In manual mode, users check environmental data displayed on Android-based smartphones, forcibly controlling the ON-OFF operations through the dual-mode PSCtrl, and in automatic mode, when environmental data exceeds the threshold set by users in advance, the dual-mode PSCtrl automatically controls the ON-OFF operations. Some experimental tests verify successful dual-mode operations of the implemented dual-mode PSCtrl.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.27-40
• /
• 2006

Damage of cut-and-cover tunnel lining can be attributed to physical and mechanical factors. Physical factors include material property, reinforcement corrosion, etc. while mechanical factors include underground water pressure, vehicle loads, etc. This study is limited to the modeling of rigid circular cut and cover tunnel constructed at a depth of $1.0{\sim}1.5D$ in loose sandy ground and subjected to a vibration frequency of 100 Hz. In this study, only damages due to mechanical factors in the form of additional loads were considered. Among the different types of additional, excessive earth pressure acting on the cut-and-cover tunnel lining is considered as one of the major factors that induce deformation and damage of tunnels after the construction is completed. Excessive earth pressure may be attributed to insufficient compaction, consolidation due to self-weight of backfill soil, precipitation and vibration caused by traffic. Laboratory tunnel model tests were performed in order to determine the earth pressure acting on the tunnel lining and to investigate the applicability of existing earth pressure formulas. Based on the difference in the monitored and computed earth pressure, a factor of safety was recommended. Soil deformation mechanism around the tunnel was also presented using the picture analysis method.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.2
• /
• pp.89-102
• /
• 2018

With the development of mobile technology, asset management on the Internet have also developed a lot. Drawing on Technology Acceptance Model, this study examines YUEBAO deployment to model consumers' purchase intention to use financial products offered online. In this study, we hypothesized that the characteristics of online asset management product will affect the purchase intention through perceived usefulness and conduct empirical analysis on Chinese consumers. In the study model, the independent variables were considered to include individual involvement, experience, product protection, corporate credibility, convenience, mobility, and familiarity. In addition, the parameters constitute the usefulness, and the dependent variable is the purchase. The results are as follows. First, YUEBAO's complementarity, corporate credibility, convenience, and familiarity have a significant influence on YUEBAO's usefulness. Second, The YUEBAO's usefulness has a noticeable effect on the purchase intention. To perceive the high usefulness, the practicality strategy of enhancing the protection property, corporate reliability, convenience and familiarity of the online asset management product is needed. The study of consumer purchase behavior and consumer purchase intention of online wealth management products is very valuable for academic and practical work.