• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.1
• /
• pp.41-44
• /
• 1977

Production of haploids in vitro anther culture of Nicotiana tabacum L. was oriented in a large number on a chemically defined culture medium. The haploids were screened for T.M.V. resistance and the segregating ratio in F$_1$ were in good agreement with the expected ratio.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.333-336
• /
• 2005

The reduction behavior of $Nb_2O_5$ in aluminum containing self-reducing briquettes(SRNB) was investigated. The time required for slag/metal equilibrium was estimated as about 20 minutes from the addition of SRNB on to the surface of molten steel. The maximum yield of Nb was expected with the slag composition of $60\%CaO-40\%Al_2O_3$. When $CaCO_3$ was used as a flux, the oxidation loss of Al by $CO_2$ should be compensated, and the chemical equivalent ratio of Al to $Nb_2O_5$ of about 1.43 was required to maximize the yield of Nb.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.543-547
• /
• 1991

This paper illustrates maximum torque per ampare radio operation and efficiency operation, which are prevalently applied to the control of permanent magnet synchronous motor(PMSM). Maximum torque per ampare ratio operation minimizes the copper loss of PMSM and maximum efficiency operation minimizes the total loss of PMSM. To verify the difference of these method, simulation and experiment results applied to IPMSM(Interior type PMSM) and SPMSM(Surface mounted PMSM) are presented.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.555-558
• /
• 2006

The chemical reduction of Pseudomonas syringae subsp. phaseolicola alginates produces neutral polymers of D-mannose and L-gulose in source specific ratios. L-Gulose was highly sensitive to degradation by 1N HCl at $100^{\circ}C$. As hydrolysis time increased, gulose recovery decreased to 22% after 4 hr, whereas 98% of the D-mannose was recovered under the same conditions. Thin layer chromatography showed the formation of a second product upon L-gulose acid hydrolysis. This new product had a rate of flow (Rf) value of 0.58, identical to that of 1,6 anhydro-${\beta}$-D-mannopyranose and very close to that of 1,6 anhydro-${\beta}$-D-glucopyranose (Rf=0.60). Because of the difference in acid sensitivity between L-gulose and D-mannose, normal acid hydrolytic techniques applied to reduced alginates produces erroneous mannuronic acid (M): guluronic acid (G) ratio's unless one accounts for the differential rates of destruction of each sugar.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.719-724
• /
• 2006

Ultrafine mullite powder was prepared from aluminium-secbutoxide and tetraethyl orthosilicate(TEOS) in the molar $Al_2O_3/SiO_2$=3/2. Sol-gel method by partial hydrolysis technique, as it were, first, TEOS was partially hydrolysized and then mixed with Al-secbutoxide for complete hydrolysis was used. X-ray diffraction, infrared spectroscopy and transmission electron microscopy, etc. confirmed that the mullite powder prepared by this method is in the stoichiometric $Al_2O_3/SiO_2$ ratio. Al-Si spinel was formed at $980^{\circ}C$ and ultrafine mullite powder with about 20 nm particle size was obtained above $1,200^{\circ}C$. Also mullite powders calcined at $1,600^{\circ}C$ had a stoichiometric composition, $3Al_2O_3{\cdot}2SiO_2$ and the lattice constants of the mullite powders calcined above $1,200^{\circ}C$ were almost coincided with theoretical values.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.50-56
• /
• 2001

In this study, the effect of specimen thickness and stress ratio on fatigue crack growth in S45C steel was investigated. Acoustic emission was monitored during the fatigue crack growth test. Both crack closure and AE technique were used in assessing fatigue crack growth behavior. Constant amplitude loading tests were performed on CT type specimen with three different thicknesses and stress ratios. Crack closure was investigated to explain the influence of specimen thickness and stress ratio on the fatigue crack growth in the second growth region. The crack closure effect was decreased with specimen thickness and stress ratio.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.218-224
• /
• 2011

A supersonic inlet at angle of attack has anti-symmetric pressure distribution, and it can make flow instability and structural problem. In this study, numerical analysis of three-dimensional inviscid flow was conducted under various throttle ratio and angle of attack conditions. Throttle ratio was defined as the ratio of the exit area to the smallest cross section area at inlet, and the ratio is controlled from 0 to 2.42. At various angle of attack, the characteristics of steady and unsteady flow around supersonic inlet is observed under different throttling ratios. From these results, pressure recovery curves and pressure history curves were plotted by post processing. Using pressure history data, FFT analysis is also carried out. Through these processes, it shows the tendency of pressure distribution anti-symmetricity and changing dominant frequency as increasing angle of attack.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2006

In this paper, an in-process diagnosis method for performance of position control servo system was studied, which was based upon null bias, slew-rate ratio and delay time measurement. Slew-rate ratio and delay time were analyzed by theoretical analysis, computer simulation and experiment. As a result of these analysis, when spool of servovalve was weared, slew-rate ratio was decreased and delay time was increased.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.702-704
• /
• 2000

Designing of the squirrel cage AC Traction Motor has many difficulties which has to be small shape in order to be suitable into bogie frame, high efficiency and light weight. It means that induction motor for tractive efforts has to be different magnetic and electric loading ratio from industrial induction motor. This paper is devoted to an examination of how this ratio affects overall design concept and. hence the main design points for traction motor. Also studied is the changed coefficients of the magnetic and electric loading ratio squirrel cage induction motor for the traction purpose, which has been already identified from the referance book for industrial purpose induction motor.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.88-93
• /
• 2011

To resolve the problem which is demand and supply imbalance of fine aggregate by the shortage of natural fine aggregate and the environment regulations, the studies for the application of recycled fine aggregate made from waste concrete have been recently carried out. The objective of this study is to shed light on the mechanical properties and durability performance of concrete using recycle fine aggregate with various water to cement ratios and unit water contents. And it is intend to propose the fundamental data for structural application of recycled concrete. In particular, the effects according to the variations of water to cement ratios and unit water contents in recycled concrete with recycled fine aggregate replacement of 100 percent are discussed by the test results, such as air content, slump, time of set, compressive strength, tensile strength, carbonation, chloride penetration.