• Title/Summary/Keyword: (D/C) ratio

Search Result 2,555, Processing Time 0.038 seconds

A low-power multiplying D/A converter design for 10-bit CMOS algorithmic A/D converters (10비트 CMOS algorithmic A/D 변환기를 위한 저전력 MDAC 회로설계)

  • 이제엽;이승훈
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.34C no.12
    • /
    • pp.20-27
    • /
    • 1997
  • In this paper, a multiplying digital-to-analog converter (MDAC) circuit for low-power high-resolution CMOS algorithmic A/D converters (ADC's) is proposed. The proposed MDAC is designed to operte properly at a supply at a supply voltge between 3 V and 5 V and employs an analog0domain power reduction technique based on a bias switching circuit so that the total power consumption can be optimized. As metal-to-metal capacitors are implemented as frequency compensation capacitors, opamps' performance can be varied by imperfect process control. The MDAC minimizes the effects by the circuit performance variations with on-chip tuning circuits. The proposed low-power MDAC is implementd as a sub-block of a 10-bit 200kHz algorithmic ADC using a 0.6 um single-poly double-metal n-well CMOS technology. With the power-reduction technique enabled, the power consumption of the experimental ADC is reduced from 11mW to 7mW at a 3.3V supply voltage and the power reduction ratio of 36% is achieved.

  • PDF

Induction of Non-Diapause Eggs and Manifestation of Quantitative Characters by Low Temperature Incubation of Eggs in the Silkworm, Bombyx mori L.

  • Singh, Ravindra;Jayaswal, K.P.;Rao, D.Raghavedra;Kariappa, B.K.;Premalatha, V.
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.4 no.2
    • /
    • pp.149-153
    • /
    • 2002
  • Induction of non-diapause eggs and manifestation of quantitative characters were studied in different seasons by low temperature incubation of eggs of a low yielding diapause with coloured cocoons silkworm breed, RDI of Bombyx mori. Hundred percent of nandiapause eggs were induced when the egg incubation was carried out at 15$^{\circ}C$ followed by incubation initially at $25^{\circ}C$ and then at $15^{\circ}C$. The diapause-nondia-pause relation was found to be reversible. Analysis of variance study demonstrated significant variation in all the quantitative characters whereas significant variation due to different incubation treatments was observed for larval span, fifth instar larval span, cocoon yield/10,000 larvae by weight, cocoon weight, cocoon shell weight, and cocoon shell ratio. study on hybrid vigour skewed significant heterosis over mid parent value for four economic characters viz., cocoon weight, cocoon shell weight, cocoon shell ratio and filament length in a Fl hybrid between RD1 with diapause eggs and Japanese type bivoltine $NB_{4} D_{2}$.

Effects of Thermal Treatment on Structural Properties of DLC Films Deposited by FCVA Method (FCVA 방법으로 증착된 DLC 박막의 열처리에 따른 구조적 물성 분석)

  • 김영도;장석모;박창균;엄현석;박진석
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.52 no.8
    • /
    • pp.325-329
    • /
    • 2003
  • Effects of thermal treatment on the structural properties of diamond-like carbon (DU) films were examined. The DLC films were deposited by using a modified filtered cathodic vacuum arc (FCVA) deposition system and by varying the negative substrate bias voltage, deposition time, and nitrogen flow rate. Thermal treatment on DLC films was performed using a rapid thermal annealing (RTA) process at $600^{\circ}C$ for 2min. Raman spectroscopy, x-ray photoemission spectroscopy (XPS), atomic force microscope (AFM), and surface profiler were used to characterize the I$_{D}$I$_{G}$ intensity ratio, sp$^3$ hybrid carbon fraction, internal stress, and surface roughness. It was found for all the deposited DLC films that the RTA-treatment results in the release of internal compressive stress, while at the same time it leds to the decrease of sp$^3$ fraction and the increase of I$_{D}$I$_{G}$ intensity ratio. It was also suggested that the thermal treatment effect on the structural property of DLC films strongly depends on the diamond-like nature (i.e., sp$^3$ fraction) of as-deposited film.ed film.

Establishment of the Successive Rearing Method of Cabbage Butterfly, Pieris rapae L. in a Room Condition (배추흰나비의 실내 계대사육법 확립)

  • 설광열;김남정
    • Korean journal of applied entomology
    • /
    • v.40 no.2
    • /
    • pp.131-136
    • /
    • 2001
  • Cabbage butterfly, Pieris rapae was reared in a room to establish a year-round rearing system. The eggs oviposited by the parent fed on host plant showed 89.2% of hatchability and hatched in 3.9 days after oviposition. The larval period was 18.1 days under high temperature, long day condition ($25^{\circ}C$, 16L : 8D), showing 97.8% pupal ratio and emergence rate. However, under low temperature, short day condition ($21^{\circ}C$, 10L : 14D) the larval period extended to 23.6 days and the pupal ratio was 70%. All of those pupae went into diapause. The oviposition preference experiment on different hosts (Chinese cabbage, cabbage, tulip and kale) showed that hot-water extract was preferred over methanol extracts or squeezed raw juices. The host preference showed that Chinese cabbage was less preferred than the other three. The artificial ovipositing kit was constructed for the oviposition in a room. The 48-hours old eggs could be stored for 7 days at$ 5^{\circ}C$ and showed 70% of hatchability. Non-diapausing pupae could be stored for 30 days at 5 to $15^{\circ}C$, showing 85% of emergence rate. However, the pupae stored at $5^{\circ}C$ showed longer storage period and higher emergence rate. The systematic successive rearing method of cabbage butterfly in a room was completed, based on the above experiments.

  • PDF

Production of 2-O--$\alpha$-D-Glucopyranosyl L-Ascorbic Acid by Cyclodextrin Glucanotransferase from Bacillus sp. JK-43 (Bacillus sp. JK-43의 Cyclodextrin Glucanotransferase에 의한 2-O-$\alpha$-D-Glucopyranosyl L-Ascorbic Acid 생산에 관한 연구)

  • 전홍기;배경미;김영희;김성구
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.29 no.1
    • /
    • pp.49-56
    • /
    • 2000
  • The 2-O-$\alpha$-D-glucopyranosyl L-ascorbic acid (AA-2G) which was enzymatically glucosylated with the cyclodextrin glucanotransferase (CGTase) [EC 2.4.1.19] from Bacillus sp. JK-43 has been reported previously. The presnet experiments examined the optimal conditons for the productio of AA-2G from AA and soluble starch, and characterized the properties of the CGTase from Bacillus sp. JK-43. The reaction mixture for the maximal production of AA-2G was followings; 12% total substrate concentration, 1,400 usits/mL of CGTase and a mixing ratio of 2 : 3(g or AA : g of soluble starch). Under this condition, 1.76mM of AA-2G, which corresponded to 2.53% yield based on AA, was produced after incubation for 24hrs at 45$^{\circ}C$ (pH 5.5). The optimum pH and temperature for the CGTase activity were 6.0 and 45$^{\circ}C$, respectively. The enzyme was stable at pH 5.5 to 9.5, and at temperature up to 5$0^{\circ}C$. The thermostability of the enzyme could be enhanced up to 6$0^{\circ}C$ by the addition of 30mM CaCl2.

  • PDF

A Study on Optimization of W-CDMA System Reverse Link Power Ratio using Multiple Access Interference Cancellation (역방향 채널 전력비에 따른 IMT-2000용 비동기 W-CDMA 시스템의 성능 분석)

  • 강명구;조장묵;진용옥
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.4 no.1
    • /
    • pp.227-232
    • /
    • 2000
  • This study applied asynchronous W-CDMA(3GPP) system that is suggested as an access method of IMT-2000, multimedia communication in next generation, and estimated fading channel by using pilot symbol different from traditional IS-95. And then, it applied PIC(Parallel Interference Cancellation) as multiple access interference cancellation and analyzed performance depending on the power rate between DPCCH(Control) and DPDCH(Data). As a result of simulation, it showed the best performance in C:D = 3:7 and 4:6, where set up as five users in case of hand design, and showed the best performance in C:D = 3:7, where did as ten users.

  • PDF

Studies on the Efficient Embryo Transfer Methods using Inbred Embryos in Generation of Transgenic Mice (Inbred 마우스 수정란을 이용한 형질전환마우스 생산에 있어서의 효과적인 수정란 이식 방법에 관한 연구)

  • Wang A. G;Kim, S. U.;Y. H. Han;Kim, S. K.;D. Y. Yu
    • Korean Journal of Animal Reproduction
    • /
    • v.27 no.1
    • /
    • pp.69-75
    • /
    • 2003
  • The objective of this study is to improve the efficiency of embryo transfer in generation of transgenic mice using inbred mouse (C57BL/6J) embryos. The embryos of C57BL/6J and BCF1 mice were superovulated by the standard protocol. One-cell stage of embryos were microinjected and the resulted one-or two-cell were transferred into one-or two-side oviducts of foster mother, respectively. When one-cell stage of embryos were transferred into one-side oviduct of 0.75 d.p.c. foster mother, the results were not ideal because of showing pregnancy ratios of 68.8$\pm$7.83% for C57BL/6J and 48.3$\pm$14.22% for BCF1, and development ratios of pups vs transferred embryos of 11.9$\pm$5.51% for C57BL/6J and 10.5$\pm$8.03% fur BCF1 . However, when two-cell stage of embryos were transferred into two-side oviducts of 0.5 d.p.c. foster mother, we got better results of 94.4$\pm$9.64% and 100$\pm$0% pregnancy ratio, and 22.1$\pm$0.4% and 21.8$\pm$0.38% development ratio for C57BL/6J and BCF1, respectively. Therefore, transferring two-cell stage of C57BL/6J embryos into two-side oviducts of 0.5 d.p.c. foster mother may be competitive to the result in BCF1 embryos. Even if there are a lot of other factors affecting these results, we conclude from these experiments that transfer of two-cell embryos into two-side oviducts of 0.5 d.p.c. foster mother is a more efficient and safe method than others in generating transgenic mice using inbred mice embryos.

An Experimental Study on the Shear Resistance of Horizontal Shear Reinforcement in R.C. Deep Beams (철근콘크리트 깊은 보에서 수평 전단철근의 전단저항에 관한 실험적 연구)

  • 양근혁;이영호;은희창;정헌수
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2001.11a
    • /
    • pp.903-906
    • /
    • 2001
  • The objective of this experimental study was to understand the effect of horizontal shear bar on the shear behavior of R.C. deep beams. Therefore, in the test program, the horizontal shear bar ratio($\rho_{sh}$) and shear span-to-overall depth ratio(a/h) are considered as two main variables. Test results indicate that for deep beams with a/h equal to 1.0, horizontal shear bar is less efficient in restricting the diagonal crack width development and enhancing the ultimate shear strength. So, it can be concluded that shear resistance of horizontal shear bar is related to a/h rather than clear span-to-effective depth ratio($l_{n}$/d) recommended in ACI code.

  • PDF

Microwave dielectric properties of the BSST ceramics with BaO compositional ratio (BSST계 세라믹스의 BaO 조성비에 따른 마이크로파 유전특성)

  • 박인길;정장호;이성갑;이영희
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.45 no.1
    • /
    • pp.81-85
    • /
    • 1996
  • Microwave dielectric properties of 0.15(B $a_{x}$S $r_{0.05}$)O-0.15(S $m_{2}$(1-y)N $d_{2y}$) $O_{3}$-0.7Ti $o_{2}$(x=o.9~0.1[mol.], y=6[m/o]) ceramics were investigated with BaO compositional ratio. Sintered density and resistivity of specimens were independent on the BaO compositional ratio. In the specimen with x=0.975[mol.], dielectric constant, quality factor and temperature coefficient of resonant frequency had good values of 76.52, 3001(at 3[GHz]) and +0.71[ppm/.ceg. C], respectively. By comparing with the stoichiometric compositions of 78.14, 2938(at 3[GHz])+14.19[ppm/.ceg. C], dielectric constant and quality factor showed similar properties, but the temperature coefficient of resonant frequency was highly improved. (author). refs., figs., tabs.s.s.

  • PDF

Development of 3D absolute displacement monitoring system and its application at the stage of tunnel construction (터널 시공 중 3차원 절대변위 계측시스템의 개발과 적용)

  • Bang, Joon-Ho;Kim, Ki-Young;Jong, Yong-Hun
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.9 no.3
    • /
    • pp.229-240
    • /
    • 2007
  • The 3D absolute displacement monitoring system has been developed to analyze the tunnel convergence measured under construction of underground structures and to manage effectively the measured data. The system is comprised of the total station, the anchor-typed target pin and the 3D absolute displacement measurement and management program. In this paper, the types and specifications of the 3D total station were presented. The anchor-typed target pin, an improved model of traditional one, was developed and its sightable distance and measurement accuracy were checked by field tests. Also a 3D absolute displacement measurement and management program, TEMS 3D, was developed to provide some analysis tools including the trend and influence lines. L/C ratio, S/C ratio and the like. The developed system was applied the construction stage of a railway tunnel for testing purpose. It is verified that the developed system is capable of predicting weak zones ahead of tunnel face by comparing with results of TSP (Tunnel Seismic Prediction) survey.

  • PDF