• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.7-14
• /
• 1996

This experiment was carried out to investigate the growth and yield responses of hydroponically grown tomato as affected by the different substrates using perlite and mixtures with perlite. Substrates used in this experiment were perlite (fine and coarse granule), peatmoss, rice hull and carbonized rice hull. The results obtained were as follows ; The best results in terms of total fruit yield and average fruit weight obtained in the single treatment of perlite, followed by perlite mixture with rice hull and carbonized rice hull. Leaf area was also higher in the plots of perlite mixture and optimum mixing ratio of perlite, peatmoss and carbonized rice hull was determined as 5:3:2 by volume. The more the rice hull was added to the mixed substrates, the less in fruit production was observed. However, adding perlite to other substrates brought higher fruit yield. Single treatment of rice hull showed the lowest fruit yield but enhanced in soluble solids contents over 6.0 $^{\circ}$Brix at each cluster.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.12
• /
• pp.1750-1757
• /
• 2000

A total of 864 broiler chicks were used at Kansas State University and the University of Nebraska to determine the effects of heat treatment of two soybean genotypes on the growth performance. The soybeans were Williams 82 variety with (+K) and without (-K) gene expression for the Kunitz trypsin inhibitor. Heat treatment (autoclaving at $121^{\circ}C$ and $1.1kg/cm^2$) was applied for 0, 3, 6, 12, 18, and 24 min, resulting in a $2{\times}6$ factorial arrangement of treatments. Station and station treatment effects occurred, indicating that response in nutritional value of the soybean genotypes to heat treatment varied from year to year and location to location. However, the interactions were in magnitude of response rather than direction of response, with greater reductions in trypsin inhibitor concentrations for the soybeans heat processed at the Nebraska location. Pooled data indicated that -K supported greater (p<0.001) ADG, ADFI and gain/feed than the +K genotype. As the length of heat treatment increased, the ADG, ADFI, and the gain/feed ratio increased for chicks fed both soybean genotypes (p<0.0001). However, heating the -K soybeans resulted in a greater response in ADG, ADFI, and gain/feed than heating the +K soybeans (genotype heat treatment interaction, p<0.001). Pancreatic weights (mg pancreas/g of BW) of chicks fed -K soybeans were reduced compared to those from chicks fed +K (p<0.001). Increasing heat treatment decreased pancreas weights in chicks fed both soybean genotypes (p<0.001). Chicks fed heated soybeans in the Nebraska experiment had lower pancreatic weights than chicks fed heated soybeans in the Kansas experiment (station heat treatment interaction, p<0.0001). Chick growth performance was improved and pancreatic weights decreased by feeding raw -K soybeans versus raw +K soybeans, and by increasing heat treatment of both soybean genotypes. However, the response to heat treatment was not independent of genotype. Both +K and -K soybeans heated for 24 min supported similar ADG, ADFI, gain/feed, and pancreas weights, although chicks fed raw +K soybeans had lower growth performance than chicks fed -K soybeans. In conclusion, raw -K soybeans supported greater growth performance in broiler chicks than raw +K soybeans, although this advantage was lost when both soybean genotypes were heated for 24 min. Heat treatment of +K soybeans supported similar growth performance to heated -K soybeans, even though +K soybeans supported lower rates and efficiencies of gain than -K soybeans when fed raw.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6451-6455
• /
• 2015

Background: Primary bone neoplasms are rare, contributing only 0.2% of the global burden of all human malignancies. Osteosarcoma (OS) and chondrosarcoma (CS) are the most common malignancies of bone. The giant cell tumor of bone (GCTb) is a benign tumor with behavior characterized by osteolytic bone destruction. The OS, CS and GCTb affect both sexes, all races and generally have incidence peaks regarding the age of the patient which vary according to the tumor type. We analyzed the incidences of OS, CS and GCTb and their relations with gender and age in patients treated in the National Rehabilitation Institute (INR, for its acronym in Spanish) over a period of nine years. Materials and Methods: In the study period, clinic pathological data for 384 patients were obtained with clinical, radiological and histopathological diagnosis for OS, GCTb and CS. Data analysis was performed using the chi-square and Fisher's exact tests. Results: From 2006 to 2014 were recorded 384 cases of bone malignancies in the database of INR. The GCTb had the highest incidence (53.1%), followed by OS (31.3%) and finally the CS (15.6%). The overall average age was $33.6{\pm}15.8$ years and the overall frequency of gender had a ratio of 1/1.03 male/female. The states with the highest incidence were Distrito Federal and Estado de Mexico with 29.2% and 25.3% respectively. Malignant neoplasms of bone assessed in the course of nine years show three significant increases in 2008, 2011 and 2014 (p=0.14). We found association between sex and tumor type (p=0.03), GCTb and CS predominated in females (54.9% and 56.6% respectively), while for the OS males were most affected (59.1%). Age was different in relation with tumor type (p=0.0001), average age was $24.3{\pm}11.2$ years for OS, $34.5{\pm}13$ years for GCTb and $49.2{\pm}18.5$ years for CS. Furthermore, associations of tumor type with topographic location of the primary tumor (P=0.0001) were found. Conclusions: In this study we can see that incidence of musculoskeletal tumor in our population is continuously increasing and in nine years an approximately 200% increase of musculoskeletal tumor cases was observed.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.1
• /
• pp.45-50
• /
• 2012

Thoracolumbar orthosis has been used for the rehabilitation of the patients with senile kyphosis. Recently, a number of different thoracolumbar orthosis designs have been introduced but its biomechanical effectiveness still remain unknown. In this study, we compared the pressure distribution on the surface of the trunk and stresses on the orthosis in relation to changes in connecting frame designs (Type 1, one-connecting frame type; Type 2, two-connecting frame type; Type 3, all-in-one type) using finite element (FE) models under different motions of the trunk. The results showed that Type 3 distributed the pressure on the trunk most evenly followed by Type 2 and Type 1 and the difference between Type 1 and Type 2 was negligible. ROM was limited most effectively by Type 3 ($8.5{\sim}9.4^{\circ}$), followed by Type 2 ($11.3{\sim}13.9^{\circ}$) and Type 1 ($12.1{\sim}15.4^{\circ}$). The ratio between the peak von Mises stress and yield strength of each material remained less than 20% regardless of orthosis type indicating low likelihood of component failure. In conclusion, our study found that all-in-one type of orthosis was the most effective design for the conservative treatment of spinal deformity in terms of function and comfort.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.67-67
• /
• 2017

We developed the breeding materials with diverse grain size and shape in japonica rice. Grain size and shape are important factors affecting consumer preference and choice. However, most of Korean japonica rice cultivars have small, short, and round grain. To diversify the grain size and shape of japonica rice, we conducted the breeding program using donor parents, Jizi1560 and Jizi1581. Jizi1560 and Jizi1581 are japonica germplasm with extremely large grain. Four crosses between the each donor parents and high yielding japonica rice cultivars, Deuraechan and Boramchan, were constructed and then anther culture method was applied. We obtained 290 doubled-haploid (DH) lines with appropriated morphological traits and selected 91 DH lines with diverse grain size and shape. The grain related-traits of the selected DH lines showed a higher diversity when compared with 319 cultivars developed by NICS (264 japonica, 13 black, and 32 Tongil type cultivars). We designated the selected DH lines, four parents, and Daeripbyeo 1, large grain japonica cultivar, as the breeding materials for further analysis. The breeding materials were classified into five groups, A to E, based on the grain-related traits. Group A (including Jizi1581) and Group B (including Daeripbyeo 1) showed similar grain width, whereas Group A exhibited longer grain length and heavier grain weight. Group C (including Deuraechan and Boramchan) showed shorter and rounder grain shape and smaller grain size than any other groups. Group D including solely Jizi1560 had extremely large grain, such as the longest grain length, width, and thickness and heaviest grain weight. Group E including only two DH lines had long and slender grain shape, so that showed the highest ratio of length to width. The grain size and shape of the breeding materials exhibited beyond the characteristics of previously developed Korean japonica cultivars. The breeding materials will be applied in the breeding programs to diversify the grain size and shape of japonica rice.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.241-250
• /
• 2009

This study was conducted to develop an prototype automatic feeder (AF) for growing-finishing pigs. The main components of AF were a feed storage hopper, a feeding motor, a feed agitator, a control box and a programmable IC, which were controlled by a personal computer. The powder type feed transfer rate of AF was average $9.83{\pm}0.4\;g\;s^{-1}$. In feeding test, growing pigs (Landrace) of about 43 kg live weight were used in the study, and was fed over a 6 weeks in pens with solid concrete floors. For feeding trials with AF, the operation time of the feeding motor was set to 2, 3, 4, 5, and 6 seconds per feeding. Pigs frequently used AF from 05:00 to 11:00 and from 11:00 to 17:00 without relationship to the operation time of the feeding motor. The AF operation time of the feeding motor to minimize feed loss was between 2 and 4 seconds. Pigs fed with AF had same or slightly higher average daily gam (0.8~0.9 kg) than that with a commercial feeder, and average daily feed intake (2.76~2.93 kg) and feed conversion ratio (3.10~3.66) of pigs fed with AF were same or lower than those with the commercial feeder except the operation time of the feeding motor set to 6 seconds. As a result, AF would help to use and improve the productivity of growing-finishing pigs.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.34-43
• /
• 1977

This study attempts to examine the performances of Myun Health Workers-the frontline workers in the Korean rural health care delivery system. The time-activity approach was mainly utilized as a measuring tool. This study was undertaken in September 1976 with 35 Myun Health Workers at the Kang Wha County. The pretested time-activity approach sheets were filled out daily for one month by those Myun Health Workers themselves. Statistical means and variances of analysis were utilized for statistical method in comparing some activities and functions converged into time distribution Findings: 1. The workers's average working hours derived in this study is 8 hours and 48 minutes per day, which takes half an hour longer than normal schedule. 2. They spend 56% working hour for direct services, in other words, the main function, 22% for supportive function, and 22% for other activities, the unrelated health services. 3. Considering the total working hours of main function, out-center activity is far more than in-center services with the ratio of 70% to 30% respectively, which proves, therefore, that the main activity of the workers is home visiting. 4. It takes 20 minutes purely for home visiting and takes 14 minutes for transportation. 5. This research also indicates that such factors as characteristics of the health workers and myun influence in shaping the structures of the worker's function and activity: a. The workers whose working site is located in myun office spend 15% among total working hours in carring out official myun activities, which is incidentally unrelated to health services, while the health subcenter have no rooms for administrative jobs for myun office. b. The workers whose office is in health subcenter contribute much time in doing main function and those working in special project distribute more time in performing supportive function. c. The types of workers are another dominant factor to influence the components of worker's functions and activities. MCH workers and MPW I spend much time for manipulating main function. d. MPW II, whose function is reorganized by special project in 2 myuns shows different pattern of time distribution compared to the TB worker orFP worker in the ordinary area. MPW II distributes their time evenly in performing MCH program, T.B. Program, F.P. program and education activity, while the unipurpose workers engage in carring out only their dominant role. e. Another variables which involve the variation of the worker's activity can be illustrated with the variables like target population, size of myun and convenience for transportation, among which the latter two are remarkable factors in determining the time for out-center service.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.856-863
• /
• 2013

An in vitro gas production technique was used in this study to elucidate the effect of two strains of active live yeast on methane ($CH_4$) production in the large intestinal content of pigs to provide an insight to whether active live yeast could suppress $CH_4$ production in the hindgut of pigs. Treatments used in this study include blank (no substrate and no live yeast cells), control (no live yeast cells) and yeast (YST) supplementation groups (supplemented with live yeast cells, YST1 or YST2). The yeast cultures contained $1.8{\times}10^{10}$ cells per g, which were added at the rates of 0.2 mg and 0.4 mg per ml of the fermented inoculum. Large intestinal contents were collected from 2 Duroc${\times}$Landrace${\times}$Yorkshire pigs, mixed with a phosphate buffer (1:2), and incubated anaerobically at $39^{\circ}C$ for 24 h using 500 mg substrate (dry matter (DM) basis). Total gas and $CH_4$ production decreased (p<0.05) with supplementation of yeast. The methane production reduction potential (MRP) was calculated by assuming net methane concentration for the control as 100%. The MRP of yeast 2 was more than 25%. Compared with the control group, in vitro DM digestibility (IVDMD) and total volatile fatty acids (VFA) concentration increased (p<0.05) in 0.4 mg/ml YST1 and 0.2 mg/ml YST2 supplementation groups. Proportion of propionate, butyrate and valerate increased (p<0.05), but that of acetate decreased (p<0.05), which led to a decreased (p<0.05) acetate: propionate (A: P) ratio in the both YST2 treatments and the 0.4 mg/ml YST 1 supplementation groups. Hydrogen recovery decreased (p<0.05) with yeast supplementation. Quantity of methanogenic archaea per milliliter of inoculum decreased (p<0.05) with yeast supplementation after 24 h of incubation. Our results suggest that live yeast cells suppressed in vitro $CH_4$ production when inoculated into the large intestinal contents of pigs and shifted the fermentation pattern to favor propionate production together with an increased population of acetogenic bacteria, both of which serve as a competitive pathway for the available H2 resulting in the reduction of methanogenic archaea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.6
• /
• pp.816-824
• /
• 2006

This study was conducted to evaluate the shoot height at which the yield and nutritive value of wormwood (Artemisia montana) is optimized in order to provide information on its potential to support animal production (Experiment 1). A second objective was to determine how the essential oil (EO) concentration in wormwood hay and silage differ (Experiment 2). In Experiment 1, Artemisia montana was harvested at five different shoot heights (20, 40, 60, 80 and 100 cm) from triplicate $1.8{\times}1.8m$ plots. Dry matter (DM) yield was measured at each harvest date and the harvested wormwood was botanically separated into leaf, stalk and whole plant fractions and analyzed for chemical composition and in vitro dry matter digestibility (DMD). Values for total digestible nutrients (TDN), digestible energy (DE) and metabolizable energy (ME) were subsequently calculated using prediction equations. Dry matter yields of stalk and whole plant increased linearly (p<0.001) and leaf yield increased quadratically (p<0.01) with shoot height, whereas the leaf/stalk ratio decreased linearly (p<0.001). As shoot height increased, there was a linear increase (p<0.001) in leaf DM, ether extract (EE) and neutral detergent fiber (NDF) contents and a quadratic increase (p<0.05) in leaf acid detergent fiber (ADF) and nitrogen free extract (NFE) contents, and stalk and whole plant DM (p<0.001), organic matter (OM, p<0.01 and p<0.05), NDF (p<0.001 and 0.05) and NFE (p<0.05) contents. However, there were decreases in leaf crude protein content (CP, quadratic, p<0.001) and stalk and whole plant EE content (linear, p<0.001), CP (quadratic, p<0.05) and ash (quadratic, p<0.05) contents. Digestibility of DM and TDN, and DE and ME value in leaves were not affected by increasing shoot height, but these measures linearly decreased (p<0.001) in stalk and whole plant. In Experiment 2, the hay had higher DM and CP concentrations, but lower EE concentration than the silage. Essential oil (EO) content in wormwood silage (0.49 g/100 g DM) was higher (p<0.05) than that in wormwood hay (0.32 g/100 g DM). Wormwood hay contained 25 essentail oils (EO) including camphor (10.4 g/100 g), 1-borneol (11.6 g/100 g) and caryophyllene oxide (27.7 g/100 g), and wormwood silage had 26 EO constituents including 3-cyclohexen-1-ol (8.1 g/100 g), trans-caryophyllene (8.6 g/100 g) and ${\gamma}$-selinene (16.8 g/100 g). It is concluded that the most ideal shoot height for harvesting wormwood is 60 cm based on the optimization of DM yield and nutritive value. Wormwood silage had a greater quantity and array of EO than wormwood hay.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1318-1323
• /
• 2008

Corn distiller's dried grains with solubles (DDGS) is a completely new feed ingredient in the Korean feed market. There is an ever increasing need for the Korean feed industry to import and make the best of it as a high protein and high energy feed ingredient. A layer feeding trial was conducted for 10 weeks to investigate the effects of addition of light-colored DDGS to layer diets on laying performance, egg qualities and yolk fatty acid composition. Also, the economics of using DDGS in the Korean situation was analyzed. Nine hundred Hy-line Brown layers, 24 weeks of age, were employed in a feeding trial consisting of four dietary treatments (0, 10, 15, and 20% DDGS), and five replicates per treatment. All experimental diets were prepared as iso-protein (17%) and iso-calorie (TMEn 2,780 kcal/kg). The use of DDGS up to 20% in layer diets did not exert any influence on feed intake, laying rate, total egg mass, mean egg weight and feed conversion ratio (p>0.05). The color and breaking strength of eggshell, as well as the albumin height and Haugh unit were not affected by the addition of DDGS up to 20% in the diet. The yolk color was significantly increased by DDGS supplementation (p<0.05). As the DDGS level increased, the oleic acid content decreased, and the linoleic acid increased (p<0.05) in egg yolk. The degree of saturation of yolk fatty acids was not affected by DDGS supplementation. The inclusion of light-colored DDGS up to 20% in layer diets resulted in a decrease of feed cost per kg without any undesirable effect on laying performance. In conclusion, the light-colored DDGS (L* 56.65) could be used up to 20% in layer diets without any harmful effect on laying performance, and possibly provide economic benefits to the Korean poultry industry.