• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.7-12
• /
• 2016

In this paper, we have developed a simple, new and economical carbonation method to synthesize a pure form of aragonite needles using dolomite raw materials. The obtained aragonite Precipitated Calcium Carbonate (PCC) was characterized by XRD and SEM, for the measurement of morphology, particle size, and aspect ratio (ratio of length to diameter of the particles). The synthesis of aragonite PCC involves two steps. At first, after calcinated dolomite fine powder was dissolved in water for hydration, the hydrated solution was mixed with aqueous solution of magnesium chloride at $80^{\circ}C$, and then $CO_2$ was bubbled into the suspension for 3 h to produce aragonite PCC. Finally, aragonite type precipitated calcium carbonate can be synthesized from natural dolomite via a simple carbonation process, yielding product with average particle size of $30-40{\mu}m$.

• Geotechnical Engineering
• /
• v.7 no.4
• /
• pp.89-98
• /
• 1991

This paper presents the three-dimensional stability analysis of the homogeneous, isotropic soil Slopes. Rotational slides are assumed with a cylindroid central part terminated with log-spiral curved ends. The ratio of threeiimensional minimum factor of safety to two 4imensional case is examined and factor of safety changes are showed for the ratio of cylinder length to slope height. On touch babes the following conclusions may be made 1. Factors of safety computed for 3-D geometry differ considerablely from ordir,arty 2-D factor of. safety. Sinoe Fn 1 Fa2 exceeds unity, threeiimensional effects tend to increase the factor of safety. 2. A,B LIU increase, the value of Fb3/ Fs2 decreases. 3. The ratio of Fr/Fs2 appears to be very sensitive to c and values.

• Journal of the Korea Concrete Institute
• /
• v.12 no.4
• /
• pp.23-30
• /
• 2000

The purpose of this paper is to study on the shear strength of high strength concrete beams with steel fibrous. In general, the shear strength of reinforced concrete beams is affected by the compressive strengths of concrete( c), the shear span-depth ratio(a/d), the longitudinal steel ratio($\rho$ $\omega$), and shear reinforcement. An experimental investigation of the shear strength of high strength concrete beams with steel fibrous was conducted. In each series the shear span-depth ratio(a/d) was held constant at 1.5, 2.8, or 3.6, while concrete strengths were varied from 320 to 520, to 800kgf/$\textrm{cm}^2$. To verify the proposed equations the experimental results were compared with those from other researches such as equation of ACI code 318-95 or equation of Zsutty. To deduce equation for shear strength from experimental data carried out MINITAP program. According to the experimental results, the addition of steel fibrous has increased the deflection and strain at failure load, improving the brittleness of the high strength concrete.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.70-73
• /
• 2007

The forming characteristics of cup-rod combined extrusion process were investigated with process parameter change. Simultaneous forward rod extrusion and backward cup extrusion was conducted with magnesium alloy, AZ31B. Process parameters such as forward extrusion ratio, backward extrusion ratio, and working temperature were controlled in a specific region and the effects of the parameter change were examined. Surface crack was developed in a certain state of the process parameters combination. The crack-free forming limit of the alloy in the combined process was disclosed by the parameter study. The microstructures of the initial and extruded workpieces were observed.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.211-221
• /
• 2012

The ascidian Styela clava has been one of the favorite seafood in Korea. Suspended culture of Styela clava was initiated in 2001 and the annual production reached 15,084 M/T, but declined to 2,655 M/T in 2011. In order to solve this problem, it is necessary to estimate the material balance according to the farm-environment. Vertical particulate fluxes and release fluxes were estimated at 2 stations, an ascidian farm (AF) and a non-cultivated area (control) in Jindong Bay. An in-situ benthic chamber(BelcI) was used in summer and winter season. The sedimentation fluxes of organic carbon were 72 mmol C $m^{-2}\;d^{-1}$, 93 mmol C $m^{-2}\;d^{-1}$, 34 mmol C $m^{-2}\;d^{-1}$ in Jul. AF, Feb. AF, Feb. control. The organic carbon oxidation rates were 13 mmol C $m^{-2}\;d^{-1}$, 81 mmol C $m^{-2}\;d^{-1}$, 31 mmol C $m^{-2}\;d^{-1}$, in each. The release fluxes of nutrients followed the general pattern, well. Consequently, the ratio of the organic carbon burial fluxes were 20:4:1, in each. By the estimation of the carbon circulation, it could be a scientific basis to analyze the reason of production decline for cultivated organism.

• Journal of Animal Science and Technology
• /
• v.55 no.4
• /
• pp.273-280
• /
• 2013

This study was conducted to investigate the effects of fermented king oyster mushroom by-products diet (FMBD) on the growth performance, blood characteristics, and carcass traits of fattening pigs and its economics. The fermented diet mainly contained 40.0% king oyster mushroom (Pleurotus eryngii) by-products, 20.0% corn, 28.0% soybean meal, 0.1% supplemental probiotics and 0.08% cellulase. The mixed ingredients were fermented for 1 d at $37^{\circ}C$ followed by 9 d at room temperature, after which they were dried at $45^{\circ}C$ for 3 d. Pigs (n=96) were divided into eight heads per pen, four diet treatments and three replications. The basal diet (C) was substituted with 20% (T1), 50% (T2) and 80% (T3) FMBD. The concentration of crude protein (CP) was significantly higher (p<0.05) at the end of the fermentation period. The average daily gain (ADG) and feed efficiency were significantly lower (p<0.05) in T3 than C. Additionally, carcass grade was significantly better (p<0.05) in all treatments than C and the ratio of high carcass grade was higher. Although substitution of FMBD decreased growth performance, it improved carcass grade and decreased the feed cost of fattening pigs. Therefore, it was expected that the increase in the utilization ratio of FMBD will reduce the cost of animal production.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.372-380
• /
• 1993

In order to improve the oxidative resistance of carbon/carbon composites, aluminium-isopropoxide and aluminium-tri-sec-butoxide sol were coated on the surface of 2D--carbon/carbon composiles and the effects uf coating were investigated. The effects of oxidative resistance were dominant in the case of catalyst/alkoxide mole ratio, 0.07, and $H_2O$/alkoxide mole ratio, 100. Through the dynamic TGA analysis with the heating rate of 20%/min, oxidative initiation tempera~ ture was enhanced about $80^{\circ}C$. The oxidative resistance effects of alkoxide sol were improved according to the times of coating. Also the 20% weight loss time of coated samples by TGA analysis was 20% better than that of un~ coated samples. The thickness of 1^{st} coated layer was about 3${\mu}$m and that of $2^{nd}$ and $3^{nd}$ coated layers was about respectively 4~5${\mu}$m and the weight loss were increased with the increasing of thermal shock test times.

• Journal of Ginseng Research
• /
• v.40 no.4
• /
• pp.375-381
• /
• 2016

Background: We evaluated the drug interaction profile of Red Ginseng (RG) with respect to the activities of major cytochrome P450 (CYP) enzymes and the drug transporter P-glycoprotein (P-gp) in healthy Korean volunteers. Methods: This article describes an open-label, crossover study. CYP probe cocktail drugs, caffeine, losartan, dextromethorphan, omeprazole, midazolam, and fexofenadine were administered before and after RG supplementation for 2 wk. Plasma samples were collected, and tolerability was assessed. Pharmacokinetic parameters were calculated, and 90% confidence intervals (CIs) of the geometric mean ratios of the parameters were determined from logarithmically transformed data using analysis of variance after RG administration versus before RG administration. Results: Fourteen healthy male participants were evaluated, none of whom were genetically defined as poor CYP2C9, 2C19, and CYP2D6 metabolizers based on genotyping. Before and after RG administration, the geometric least-square mean metabolic ratio (90% CI) was 0.870 (0.805-0.940) for caffeine to paraxanthine (CYP1A2), 0.871 (0.800-0.947) for losartan (CYP2C9) to EXP3174, 1.027 (0.938-1.123) for omeprazole (CYP2C19) to 5-hydroxyomeprazole, 1.373 (0.864-2.180) for dextromethorphan to dextrorphan (CYP2D6), and 0.824 (0.658-1.032) for midazolam (CYP3A4) to 1-hydroxymidazolam. The geometric mean ratio of the area under the curve of the last sampling time ($AUC_{last}$) for fexofenadine (P-gp) was 0.963 (0.845-1.098). Administration of concentrated RG for 2 wk weakly inhibited CYP2C9 and CYP3A4 and weakly induced CYP2D6. However, no clinically significant drug interactions were observed between RG and CYP and P-gp probe substrates. Conclusion: RG has no relevant potential to cause CYP enzyme- or P-gp-related interactions.

• Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.304-315
• /
• 2022

Background: Filter-feeding zooplankton has limited food resources owing to their habitat. Consequently, it is crucial for them to acquire all essential compounds, such as fatty acids (FAs) and amino acids, from confined diets. To elucidate the trophic transfer of FAs to filter feeders, the primary consumers in freshwater ecosystems, we compared the FA accumulation patterns of two species of filter-feeding zooplankton, Daphnia magna and Branchinella kugenumaensis, in a laboratory experiment. Experimental neonates and nauplii preyed on a single phytoplankton species (Selenastrum capricornutum) for three days after hatching prior to diet switching. Five replicates per feeding group in each species were fed on six different types of mixed phytoplankton diet for 10 days after diet switching. Subsequently, the consumers and diets were harvested and FAs were extracted. Results: Principal component analysis showed that the FA profiles of zooplankton were well-grouped by species and diet. Although diet affects the FA profiles of consumers, they exhibit different FA accumulation patterns. D. magna had a higher 18C-ω3 content and ω3/ω6 ratio than did B. kugenumaensis. In contrast, B. kugenumaensis had higher contents of 18:1ω7 and 20:5ω3 (eicosapentaenoic acid), 22:6ω3 (docosahexaenoic acid), and a higher ratio of ∑18C monounsaturated FAs to ∑18C-ω3 polyunsaturated FAs than did D. magna. Conclusions: This study showed that two primary consumers, D. magna and B. kugenumaensis, fed the same diet had different assimilation patterns of FAs under controlled environments. Specific FA accumulation patterns in filter feeders can provide information on the transfer process of various FAs to high-trophic organisms.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.840-846
• /
• 2012

Global climate changes caused by $CO_2$ emissions are currently debated around the world; green sources of energy are being sought as alternatives to replace fossil fuels. The sustainable use of biogas for energy production does not contribute to $CO_2$ emission and has therefore a high potential to reduce them. Catalytic steam reforming of a model biogas ($CH_4:CO_2$ = 60%:40%) is investigated to produce $H_2$-rich synthesis gas. The biogas utilized 3D-IR matrix burner in which the surface combustion is applied. The ruthenium catalyst was used inside a reformer. Parametric screening studies were achieved as Steam/Carbon ratio, biogas component ratio, Space velocity and Reformer temperature. When the condition of Steam/Carbon ratio, $CH_4/CO_2$ ratio, Space velocity and Refomer temperature were 3.25, 60% : 40%, $14.7L/g{\cdot}hr$ and $550^{\circ}C$ respectively, the hydrogen concentration and methane conversion rate were showed maximum values. Under the condition mentioned above, $H_2$ yield, $H_2$/CO ratio, CO selectivity and energy efficiency were 0.65, 2.14, 0.59, 51.29%.