• Journal of Korean Association for Spatial Structures
• /
• v.24 no.1
• /
• pp.47-55
• /
• 2024

The aim of this study is to evaluate the possibility of damage to cultural assets resulting from vibrations generated by construction vehicle traffic. The cultural heritage's natural vibration frequency was determined to be 150Hz by measurement. The damping ratios were calculated as 4.7% using the logarithmic decrement approach and 4.3% using the half-power method. The vibration measurements obtained during vehicle operation indicated that, despite an increase in vehicle velocity of up to 15 km/h, the vibrations remained below the detectable level of 0.13 mm/sec. When the road is curved and the terrain is sloped, a suitable speed for vehicle operation was found to be around 17 km/h, at which point vibrations were seen. The highest recorded vibration amplitude at this velocity was 0.217 mm/sec, which remains below the stringent regulation limit of 2 mm/sec. Thus, it can be concluded that there is no actual harm caused by vibrations.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.3 no.2
• /
• pp.25-31
• /
• 1996

Various treaments such heating, acid tenting, acid healing, alkaline treating, acid+alkaline renting were attempted to investigate their effects on molar ratio, chemical composition, DTA and specific surface area(SSA) of natural zeolite poder. Molar ratio, Si to AI. of natural zeolite was 4.78, which represented high silica type. Composition of natural zeolite showed that $SiO_2$ was 66.34% $Al_2O_3$ was 13.89%, $Fe_2O_2$ was 1.55% X-ray diffraction showed that main component of natural zeolite was mordenite and clinoptliolite. Differential Thermal Analysis and Thermogravimetry curve of natural zeolite was showed to peak of endothermic peak at $80^{\circ}C$ and it means to the peak of dehydrate reaction, but recristalization was not formed below at $1,000^{\circ}C$. Weight loss during calcination was 16% at $1,000^{\circ}C$. Thermal treatments on SSA of natural zolite powder decreased from $75.2m^2/g\;to\;2.1m^2/g$. In contrast chemical treatments on SSA showed to increase to $300.2m^2/g$(1 N HCl treating), $54.9m^2/g$(1 N NaOH) and $90.9m^2/g$(HCl+NaOH)tudy, it could be proposed to employ acid tret method as packaging materisls for MA packaging.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.121-132
• /
• 2000

This study is to investigate the performance of a new BNR process using predenitrification scheme focusing on nitrogen removal and the possibility of adapting a computer simulation scheme in BNR process development. By using a pre-denitrification basin, higher $COD/NO_3-N$ ratio could be sustained in this BNR process. The results of the investigation showed a SDNR value of 9.04mg/gMv/hr. In the anoxic tank, the average value of SPRR of 6.25mgP/gMv/hr was observed to be very sensitive to SCOD load of influents. By calibrating internal parameters (stoichiometric and kinetic parameters) of the simulation model, the results of simulation for various BNR processes gave good agreement with observed data. The major adjustment was given with three parameters, maximum specific growth rate of heterotrophic biomass, short chain fatty acid (SCFA) limit, and phosphorous release rate. With the series of simulations on varying operational conditions, the simulation by computer program can be a useful tool for process selection, and design and operation of municipal wastewater treatment plant.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.225-230
• /
• 2008

Diabetes mellitus is the fifth leading cause of death among Koreans. Control of hyperglycemia and dyslipidemia is strongly correlated with decrease in risks for cardiovascular diseases, the most common and fatal diabetic complication. The effects of chronic feeding of a mixture of Chinese herbs on blood lipid profile were measured in an animal model of type 2 diabetes mellitus, db/db mice (C57BL/Ks). The Chinese herb mixture was composed of Panax ginseng C. A. Meyer,Astragalus membranaceus, Glycyrrhiza uralensis, Lycium chinense, Morus, Pueraria thunbergiana, Prunella vulgaris var. lilacina, Acanthopanax sessiliflorus, Schizandra chinensis, Scutellaria baicalensis, Dioscorea batatas, Polygonatum doratumvar. pluriflorum, Paeonia lactiflora, and Rehmannia glutinosa in a ratio of 1 : 0.7 : 0.4 : 0.7 :0.4 : 0.7 : 1.1 : 0.9 : 0.4 : 0.4 : 0.7 :0.7 : 0.9 : 0.9. Methanol extract of the Chinese herb mixture was tested for the inhibitory activity against yeast ${\alpha}$-glucosidase in vitro. The Chinese herb mixture extract inhibited ${\alpha}$-glucosidase by 25.2% at the concentration of 0.5mg/mL. Four weekold male db/db mice (n = 14) were fed AIN-93G semipurified diet or diet containing 10% powder of the Chinese herb mixture for 6 weeks after 1 week of adaptation period. Body weight (39.5 ${\pm}$ 1.6 g) and food intake (4.3 ${\pm}$ 0.6 g/day) of the Chinese herb group were not significantly different from those of the control group (40.4 ${\pm}$ 2.6 g and 4.5 ${\pm}$ 0.6 g/day). Consumption of Chinese herb mixture significantly decreased plasma glucose level (442.5 ${\pm}$ 36.0mg/dL) compared with the control group (489.8 ${\pm}$ 34.6 mg/dL, p < 0.05). Plasma cholesterol level (159.2 ${\pm}$ 18.4 mg/dL) of the Chinese herb group was significantly lower than that of the control group (185.4 ${\pm}$ 13.7 mg/dL, p < 0.05). Blood glycated hemoglobin (6.3 ${\pm}$ 0.8%) and plasma triglyceride levels (99.4 ${\pm}$ 15.0mg/dL) of the Chinese herb group were not significantly different from those of the control group (6.7 ${\pm}$ 0.7% and 108.8 ${\pm}$ 11.0mg/dL). Thus, the Chinese herb mixture could be useful in the treatment of diabetes and cardiovascular complications of diabetes.

• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.

• Biomedical Science Letters
• /
• v.22 no.1
• /
• pp.9-17
• /
• 2016

Unfortunately, the five-year survival rate of lung cancer is relatively low compared with other cancers. Therefore, better predictors are need for prognosis, therapeutic strategy, risk stratification and predicting long-term mortality of lung cancer. Recently, increasing data suggest that Glasgow Prognostic Score (GPS) and procalcitonin levels are useful predictor cancer prognosis. In this study, we retrospectively investigated the correlation of GPS or procalcitonin to clinical variables in patients with pretreatment lung cancer. In 135 patients with pretreatment lung cancer, GPS, procalcitonin, demographic characteristics, hematological, coagulation, biochemical, inflammatory and cardiac markers were measured. Monocyte, eosinophil, basophil, neutrophil to lymphocyte ratio, red cell distribution width (RDW), platelet to lymphocyte ratio, mean platelet volume to platecrit ratio, D-dimer and prothrombin time (PT) levels were higher, whereas mean platelet volume was lower than their normal ranges. Glucose and sodium levels were low, whereas gamma glutamyl transferase (GGT), total bilirubin, creatinine and inorganic phosphorus concentrations were increase compared their normal ranges. Procalcitonin, high sensitivity C-reactive protein and troponin-I concentrations were elevated compared with their normal ranges. GPS had significantly positive or negative relations to cancer stage, hematological, coagulation, biochemical, inflammatory and troponin-I. Based on the data, we suggest that GPS may be a potent and useful predictor for prognosis, therapeutic strategy, risk stratification and predicting long-term mortality of lung cancer.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.35-47
• /
• 2011

Dynamic characteristics of a flow control valve, which plays an important role in thrust and O/F control of liquid rocket engines, have been analyzed by the AMESim simulator modeling. The speed control method was proposed for the control of the flow valve equipped with a BLDC motor. The experimental results demonstrated the feasibility of systematical application as well as the performance of the speed control method. Moreover, the speed control method for BLDC motor is much simpler than the P control method in complex flow systems. With the speed control method, the control flow characteristics were evaluated according to plunger shapes. Consequently, same plunger shape proved to be more efficient in the mixture ratio control operated by two flow valves. It was also shown that the appropriate modification of plunger shapes could reduce the mixture ratio perturbation by 0.5%.

• Phonetics and Speech Sciences
• /
• v.4 no.3
• /
• pp.85-92
• /
• 2012

It is a well-known phenomenon that vowel duration in English is generally longer before a voiced stop than a voiceless one. Past research has postulated that the closure duration of the voiceless stop is generally longer than that of the voiced stop and that the duration of a preceding vowel is determined complementarily by the closure duration of the stop. To shed further light on the phenomenon, this study examined fourteen native speakers of American English who read the monosyllabic words [bVC] (V = [i, ɪ, eɪ, ɛ, æ, ʌ, ɑ], C = [t, d]). First, we found that mean vowel duration was 38 ms longer before the voiced stop than the voiceless (mean duration ratio = 1.24). Second, mean closure duration of the voiced stop was only shorter by 5 ms compared to the voiceless stop (mean duration ratio = 0.97). Therefore, for our subjects, vowel duration was not determined complementarily by the closure duration of the following stop. Third, vowels with longer inherent durations (viz., tense, diphthong, and low vowels) tended to show larger duration ratios in the voiced and voiceless contexts than the vowels with shorter durations (viz., lax vowels). This indicates that the lengthening of inherently shorter vowels before a voiced stop is limited in order to avoid overlapping with longer vowels in the duration range. Fourth, there was no significant gender difference in vowel duration ratios in the contexts of voiced and voiceless stops. Finally, considerable individual differences were found in the vowel and consonant duration ratios.

• Advances in concrete construction
• /
• v.10 no.1
• /
• pp.81-92
• /
• 2020

Flexural and splitting strength behavior of conventional concrete can significantly be improved by incorporating the fibers in it. A significant number of research studies have been conducted on various types of fibers and their influence on the tensile capacity of concrete. However, as an important property, tensile capacity of fiber reinforced concrete (FRC) is not modelled properly. Therefore, this paper intends to formulate a model based on experiments that show the relationship between the fiber properties such as the aspect ratio (length/diameter), fiber content, compressive strength, flexural strength and splitting strength of FRC. For the purpose of modeling, various FRC mixes only with steel fiber are adopted from the existing research papers. Automated neural network search (ANS) is then developed and used to investigate the effect of input parameters such as fiber content, aspect ratio and compressive strength to the output parameters of flexural and splitting strength of FRC. It is found that the ANS model can be used to predict the flexural and splitting strength of FRC in a sensible precision.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.113-122
• /
• 2010

In this study, 150MPa ultra-high-strength concrete was manufactured, and its performance was reviewed. As technically meaningful autogenous shrinkage reportedly occurs at a W/B ratio of 40% or less, although it occurs in all concrete regardless of the W/B ratio, the effects of the use of expansive admixture and shrinkage reducer, or of the friction and restraint of forms that may result in the effective reduction of autogenous shrinkage, were reviewed. As a result, considering the flow and strength characteristics, it was found that the slump flow time was shorter with expansive admixture, and shortest with shrinkage reducer. All specimens with $30kg/m^3$ expansive admixture showed high strength at early material age. Their strength decreased due to the expansion cracks when there was excessive use of expansive admixture, and the use of shrinkage reducer did not influence the change in the strength according to the material age. The expansive admixture had a shrinkage reduction effect of 80%, while the shrinkage reducer had a shrinkage reduction effect of 30%, indicating that the expansive admixture had a stronger effect. It seems that mixing the two will have a synergistic effect. The shrinkage reduction rate was highest when the W/B ratio was 20%. The form suppressed the expansion and shrinkage at the early period, and the demolding time did not significantly influence the shrinkage. The results of the study showed that the excessive addition of expansive admixture leads to expansion cracks, and the expansive admixture and shrinkage reducer have the highest shrinkage reduction effect when they are mixed.