• International Journal of Industrial Entomology and Biomaterials
• /
• v.16 no.2
• /
• pp.61-66
• /
• 2008

In this paper, the regenerated silk fibroin (SF)/nylon 6 blend filaments were fabricated using wet spinning technique and the effect of coagulant on the post drawing and morphology of blend filaments was investigated. In the result of wet spinnability, methanol, acetone, DMF, and THF showed relatively good coagulation strength and fiber formation for the regenerated SF. On the contrary, they did not exhibit strong enough to produce a uniform nylon 6 filament due to the lack of coagulation strength. In the examination of post drawing performance, methanol showed the highest maximum draw ratio of the blend filament over all blend ratios. The maximum draw ratio of SF/nylon 6 blend filaments decreased with the reduction of SF content regardless of type of coagulant. SEM observation showed the consistent result with that of post-drawing performance. As SF content decreased, the uniform and regular structure was changed to irregular one. In particular, the severe macro-phase separation between SF and nylon 6 could be detected in the 50/50 SF/nylon 6 blend filaments coagulated in methanol and THF.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.2
• /
• pp.65-71
• /
• 2001

This paper describes partial discharge phenomenon with SF6gas pressures in insulation consisting of insulation paper and SF6 gas. We made the specimens with SF6 gas gaps which exist between aramid papers and electrodes and calculated the electric field intensity in the these gaps. We measured the partial discharge inception voltages and the AC breakdown voltages with the test method of IEC 60060-2 and did the partial discharge degradation experiments with a constant voltage. According to gas pressures, the breakdown voltages in SF6gas gaps were calculated by Paschen's law. And these results showed the ability applying partial discharge inception voltages evaluation to Paschen's law and the relationship between the PD quantities occurring insulation breakdown and PD occurring area.

• Journal of Trauma and Injury
• /
• v.20 no.2
• /
• pp.83-89
• /
• 2007

Purpose: This research was performed to determine which clinical signs and symptoms of brain injury are sensitive indicators of skull fracture (SF) and intracranial injury (ICI) in head injured children. Methods: We conducted a prospective study of minor head trauma in children younger than 2 years of age for a 1-year period. Skull radiographs, brain computed tomography (CT), and data forms, including mechanism of injury, symptoms, physical findings, and hospital course, were completed for each child. Results: Of 137 study subjects, 17 (12.4%) had SF/ICI. Falls were the most common mechanism of injury, and heights of fall above 1 meter were associated with incidence of SF/ICI (p<0.05). Scalp abnormalities were not associated with incidence of SF/ICI. As for clinical symptoms, lethargy and a grouping of features (irritability & vomiting) were associated with incidence of SF/ICI (p<0.05). The incidence of seizure, loss of consciousness, vomiting, irritability, and scalp abnormality did not differ significantly between those with normal radiologic findings and those with SF/ICI. Among asymptomatic patients, 11 (14.5%) patients had SF/ICI, and among patients with normal scalp findings, 9 (12.7%) patients had SF/ICI. Conclusion: Clinical signs and symptoms, except for lethargy and a grouping of features (irritability & vomiting), were not sensitive predictors of SF/ICI. Nevertheless, SF/ICI occurred among normal children. In such a case, a liberal policy of CT scanning is warranted.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.8
• /
• pp.354-358
• /
• 2003

In this paper, insulations characteristics by temperature changes(＋50～-50[$^{\circ}C$]) of $SF_{6}$ gas in the experimental chamber were studied. From this result, at the low temperature, the breakdown voltage was increased with a drop of temperature and an increase of inner pressure in GIS. In addition the ability of insulation of liquid $SF_{6}$ was higher than that of the highly pressurized $SF_{6}$ gas. That is, with progress of low temperature, the main reason of breakdown was not liquefaction of $SF_{6}$ but rapid decrease of inner pressure. This study will come in greatly handy for the insulation design of GIS in a hard cold region

• Steel and Composite Structures
• /
• v.51 no.3
• /
• pp.243-260
• /
• 2024

Thirteen self-compacting recycled concrete filled aluminium tubular (SCRCFAT) columns were tested under concentric compression loads. The effects of the replacement ratio of the recycled concrete aggregate (RCA) and steel fibre (SF) reinforcement on the structural performance of the SCRCFAT columns were studied. A control specimen (C000) was cast with normal concrete without SF to be reference for comparison. Twelve columns were cast using RCA, six columns were cast using concrete incorporating 2% SF while the rest of columns were cast without SF. Failure mode, ductility, ultimate load capacity, axial deformation, ultimate strains, stress-strain response, and stiffness of the SCRCFAT columns were studied. The results showed that, the peak load of tested SCRCFAT columns incorporating 5-100 % RCA without SF reduced by 2.33-11.28 % compared to that of C000. Conversely, the peak load of tested SCRCFAT columns incorporating 5-100% RCA in addition to 2% SF increased by 21.1-40.25%, compared to C000. Consequently, the ultimate axial deformation (Δ) of column C100 (RCA=100% and SF 0%) increased by about 118.9 % compared to C000. The addition of 2% SF to the concrete mix decreased the axial deformation of SCRCFAT columns compared to those cast with 0% SF. Moreover, the stiffness of the columns cast without SF decreased as the RCA % increased. In contrast, the columns stiffness cast with 2% SF increased by 26.28-89.7 % over that of C000. Finally, a theoretical model was proposed to predict the ultimate loads tested SCRCFAT columns and the obtained theoretical results agreed well with the experimental results.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.1
• /
• pp.66-74
• /
• 2012

It is well known that sunflower (SF) sprout has more beneficial effects than SF seed due to increased levels of phytochemical components such as vitamins, total phenolics, and isoflavones during germination. This study investigated the physicochemical properties and antioxidative activities of SF seed during both germination and cultivation. In a proximate analysis, the water content of SF groat was 9.17% and then increased to 15.32% on the 11th day after seeding. On a dry weight basis, crude fat content decreased while the contents of carbohydrates, crude protein, and crude ash increased. As cultivation proceeded, the contents of minerals were in decreasing order of K, Mg, Ca, Na, Zn, Fe, Mn, and Cu, in which SF sprout cultivated for 9 or 11 days contained the highest mineral contents. Though vitamin C was not detected on SF groat, the content of vitamin C continuously increased up to the 5th day of cultivation and then decreased gradually. Vitamin E content in SF groat was higher than that in SF sprout. It was also found that the vitamin E content in SF sprout was the highest on the 5th day of cultivation. Daidzin was not detected in SF groat, but its concentration reached a maximum on the 5th day of cultivation in SF sprouts. Furthermore, higher amounts of daidzein were observed on the 3rd, 5th, and 9th days of cultivation. The highest total isoflavone content was observed on either the 3rd or 5th day of cultivation. The highest content of total phenolics was observed on the 5th of cultivation. When DPPH radical and peroxyl radical scavenging activities of SF sprout were measured in order to measure antioxidant efficacy, it was found that 5 day-cultivated SF sprout had the highest scavenging activities. In conclusion, SF sprout cultivated for 9 or 11 days was found to be a good source of minerals. Furthermore, the fifth-day after seeding was the optimal time for the production of SF sprout with effective natural antioxidant activity and high amounts of functional components such as vitamins, total phenolics, and isoflavones.

• Journal of Environmental Science International
• /
• v.22 no.1
• /
• pp.83-89
• /
• 2013

Silicon carbide with aluminium oxide was used to remove the sulphur hexafluoride ($SF_6$) gas using microwave irradiation. The destruction and removal efficiencies (DREs) of $SF_6$ were studies as a function of various decomposition temperatures and microwave powers. The decomposition of $SF_6$ gas was analyzed using GC-TCD. XRD (X-ray powder diffraction) and XRF (X-ray Fluorescence Spectrometer) were used to characterize the properties of aluminum oxide. DREs of $SF_6$ were increased as the microwave powers were increased. Additive aluminium oxide on SiC increased the removal efficiencies and decreased the decomposition temperature. The XRD results show that the ${\gamma}-Al_2O_3$ was transformed to ${\alpha}-Al_2O_3$ during $SF_6$ decomposition by microwave irradiation. It was found that the best material to control $SF_6$ was SiC with $Al_2O_3$ 30 wt% in consideration of microwave energy consumption and $SF_6$ decomposition rate.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.516-520
• /
• 2009

Atmosphere Plasmas of Gas Discharge (APGD) have been used in plasma sources for material processing such as etching, deposition, surface modification, etc. This study is to investigate and understand the fundamental plasma discharge properties. Especially, $SF_6/N_2$ mixed gas would be used in power transformer, GIS (Gas insulated switchgear) and so on. In this paper, we developed a one dimensional fluid simulation model with capacitively coupled plasma chamber at the atmosphere pressure (760 [Torr]). 38 kinds of $SF_6/N_2$ plasma particles which are an electron, two positive ions (${SF_5}^+$, ${N_2}^+$), five negative ions (${SF_6}^-$, ${SF_5}^-$, ${SF_4}^-$, ${F_2}^-$, ${F_1}^-$), thirty excitation and vibrational particles for $N_2$ were considered in this computation. The $N_2$ gases of 20%, 50%, 80% were mixed in $SF_6$ gas. As the amount of $N_2$ gas was increased, the properties of electro-negative plasma moved toward the electro-positive plasma.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.2
• /
• pp.114-119
• /
• 2000

Etch characteristics of SF6/CI2 electron cyclotron resonance (ECR) plasmas have been investigated. Surface reaction of gas plasma with polysilicon was also analysed using X-ray photoelectron spectroscopy (XPS). At the same time, the relationship between surface reaction and the etched profile of polysilicon was examined using XPS. The etch rate of polysilicon and oxide increases with increasing flow rate of SF6 in the SF6/CI2 gas mixture, and tis selectivity also increase also increase. It was also found that as increasing flow rate of SF6 in the SF6/CI2 gas mixture, the atomic% of chlorine detected at surface region decrease, but F and S contents increase. At the same time, when the mixing ratio of SF6 gas increases, the anisotropy of etched polysilicon is sharply decreased in the 0%~10% range of the SF6 mixing ratio, but is rarely varied in the range over 10%, in spite of the large variations in flow rates. It can be explained that the bonding of S-Si due to SiSx(x$\leq$2) compound formed on the etched surface suppress the formation of Si-Cl and 'or Si-F bonding in the silicon etching.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.4
• /
• pp.446-453
• /
• 2012

Destruction and removal efficiency (DRE) of $SF_6$ was tested with varying degrees of ionization and initial concentrations of $SF_6$. The applied dose of ionization energy varied from 0 to 400 kGy. The initial concentration of $SF_6$ gas also varied from 1,000 ppm to 2,500 ppm. In order to assess the effect of a residence time on DRE (Destruction and Removal Efficiency, %), experiments were also conducted at different irradiation times of 3, 5, 10, 15, and 20 sec, respectively. The DRE of $SF_6$ increased with an increasing amount of dose and current. Regardless of initial concentration of $SF_6$, 90% level of DRE was achieved by applying over 10 mA of electrical current.