과제정보
The experimental tests were carried out by the reinforced concrete laboratory of the faculty of Engineering, Kafrelsheikh University, Egypt.
참고문헌
- ACI Committee 318 (2011), Building Code Requirements for Structural Concrete (ACI 318-11), American Concrete Institute.
- Akono A.T., Chen, J., Zhan, M. and Shah, S.P. (2021), "Basic creep and fracture response of fine recycled aggregate concrete", Constr. Build. Mater. 266(2021) 121107. https://doi.org/10.1016/j.conbuildmat.2020.121107.
- Aksoylu, C., Ozkilic, Y.O., Hadzima-Nyarko, M., Isik, E. and Arslan, M.H. (2022), "Investigation on improvement in shear performance of reinforced-concrete beams produced with recycled steel wires from waste tires", Sustainability, 14(20), 13360.
- Altun M.G. and Oltulu, M. (2020), "Effect Of different types of fiber utilization on mechanical properties of recycled aggregate concrete containing", Silica Fume, J. Green Build., 15(2020), 119-136. https://doi.org/10.3992/1943-4618.15.1.119.
- Ashok, M., Jayabalan, P., Saraswathy, V. and Muralidharan, S. (2020), "A study on mechanical properties of concrete including activated recycled plastic waste", Adv. Concrete Construct., 9(2), 207-215. https://doi.org/10.12989/acc.2020.9.2.207.
- Basaran, B., Kalkan, I., Aksoylu, C., Ozkilic, Y.O. and Sabri, M.M.S. (2022), "Effects of waste powder, fine and coarse marble aggregates on concrete compressive strength", Sustainability, 14(21), 14388.
- Celik, A.I., Ozkilic, Y.O., Zeybek, O., Karalar, M., Qaidi, S., Ahmad, J. and Bejinariu, C. (2022), "Mechanical behavior of crushed waste glass as replacement of aggregates", Materials, 15(22), 8093.
- Celik, A.I., Ozkilic, Y.O., Zeybek, O., Ozdoner, N. and Tayeh, B.A. (2022), "Performance assessment of fiber-reinforced concrete produced with waste lathe fibers", Sustainability, 14(19), 11817.
- Dong, C.X., Kwan, A.K.H. and Ho, J.C.M. (2016), "Axial and lateral stress-strain model for concrete-filled steel tubes with FRP jackets", Eng. Struct., 126, 365-378. https://doi.org/10.1016/j.jcsr.2016.03.031.
- Egyptian Code for the Design and Construction of Concrete Structures, ECP 203-2018, Tests Guide, Part II (aggregates test), page 2-13.
- Emara M., Mohamed, H.A., Rizk, M.S. and Hu, J.W. (2021), "Behavior of ECC columns confined using steel wire mesh under axial loading", J. Build. Eng., 43(2021) 102809. https://doi.org/10.1016/j.jobe.2021.102809.
- Fayed, S., Madenci, E., Ozkilic, Y.O. and Mansour, W. (2023), "Improving bond performance of ribbed steel bars embedded in recycled aggregate concrete using steel mesh fabric confinement", Construct. Build. Mater., 369, 130452.
- Ghasemi, M., Zhang, C., Khorshidi, H., Zhu, L. and Hsiao, P. (2023), "Seismic upgrading of existing RC frames with displacement-restraint cable bracing", Eng. Struct., 282, 115764. https://doi.org/10.1016/j.engstruct.2023.115764.
- Guneyisi, E., Gesoglu, M., Algin, Z. and Yazici, H. (2014), "Effect of surface treatment methods on the properties of self-compacting concrete with recycled aggregates", Construct. Build. Mater., 64, 172-183. https://doi.org/10.1016/j.conbuildmat.2014.04.090.
- Hadi, M.N.S. (2006), "Behaviour of FRP wrapped normal strength concrete columns unde eccentric loading", Compos. Struct., 72(2006) 503-511. https://doi.org/10.1016/j.compstruct.2005.01.018.
- Hadi, M.N.S. (2007), "Behaviour of FRP strengthened concrete columns under eccentric compression loading", Compos. Struct., 77(2007) 92-96. https://doi.org/10.1016/j.compstruct.2005.06.007.
- Hamoda A., Abdelazeem, F. and Emara, M. (2021), "Concentric compressive behavior of hybrid concrete-Stainless Steel Double-Skin Tubular Columns incorporating High Performance Concretes", Thin-Wall. Struct., 159(2021) 107297. https://doi.org/10.1016/j.tws.2020.107297.
- Han L.H. and Yao, G.H. (2004), "Experimental behaviour of thin-walled hollow structural steel (HSS) columns filled with self-consolidating concrete (SCC)", Thin-Wall. Struct., 42(2004), 1357-1377. https://doi.org/10.1016/j.tws.2004.03.016.
- Han, L.H., Ren, Q.X. and Li, W. (2011), "Tests on stub stainless steel-concrete-carbon steel double-skin tubular (DST) columns", J. Construct. Steel Res., 67(3), 437-452. https://doi.org/10.1016/j.jcsr.2010.09.010.
- Han, L.H., Yao, G.H. and Zhao, X.L. (2005), "Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)", J. Construct. Steel Res., 61(9), 1241-1269. https://doi.org/10.1016/j.jcsr.2005.01.004.
- Han, Q.H., Wang, Y.H., Xu, J. and Xing, Y. (2016), "Fatigue behavior of stud shear connectors in steel and recycled tyre rubber-filled concrete composite beams", Steel Compos. Struct., 22(2), 353-368. https://doi.org/10.12989/scs.2016.22.2.353.
- He, H., Qiao, H., Sun, T., Yang, H. and He, C. (2024), "Research progress in mechanisms, influence factors and improvement routes of chloride binding for cement composites", J. Build. Eng., 86, 108978. https://doi.org/10.1016/j.jobe.2024.108978.
- Huang, H., Guo, M., Zhang, W., Zeng, J., Yang, K. and Bai, H. (2021b), "Numerical investigation on the bearing capacity of RC columns strengthened by HPFL-BSP under combined loadings", J. Build. Eng., 39, 102266. https://doi.org/10.1016/j.jobe.2021.102266.
- Huang, H., Huang, M., Zhang, W. and Yang, S. (2021a), "Experimental study of predamaged columns strengthened by HPFL and BSP under combined load cases", Struct. Infrastruct. Eng., 17(9), 1210-1227. https://doi.org/10.1080/15732479.2020.1801768.
- Huang, H., Huang, M., Zhang, W., Pospisil, S. and Wu, T. (2020), "Experimental investigation on rehabilitation of corroded RC columns with BSP and HPFL under combined loadings", J. Struct. Eng., 146(8). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002725.
- Karalar, M., Bilir, T., Cavuslu, M., Ozkilic, Y.O. and Sabri, M.M.S. (2022), "Use of recycled coal bottom ash in reinforced concrete beams as replacement for aggregate", Front. Mater, 9, 1064604.
- Karalar, M., Ozkilic, Y.O., Aksoylu, C., Sabri, M.M.S., Beskopylny, A.N., Stel'Makh, S.A. and Shcherban, E.M. (2022), "Flexural behavior of reinforced concrete beams using waste marble powder towards application of sustainable concrete", Front. Mater., 9, 1068791.
- Karalar, M., Ozkilic, Y.O., Deifalla, A.F., Aksoylu, C., Arslan, M. H., Ahmad, M. and Sabri, M.M.S. (2022), "Improvement in bending performance of reinforced concrete beams produced with waste lathe scraps", Sustainability, 14(19), 12660.
- Kiran, D., Saini, B. and Aggarwal, P. (2018), "Effect of accelerators with waste material on the properties of cement paste and mortar", Comput. Concrete, 22(2), 153-159. https://doi.org/10.12989/cac.2018.22.2.153.
- Konno, K., Sato, Y., Kakuta, Y. and Ohira, M. (1997), "Property of recycled concrete column encased by steel tube subjected to axial compression", Trans. Japan Concr. Inst., 19 (1997) 231-238.
- Konno, K., Sato, Y., Ueda, T. and Onaga, M. (1998), "Mechanical property of recycled concrete under lateral confinement", Trans. Japan Concr. Inst., 20(1998) 287-292.
- Kou S.C. and Poon, C.S. (2009), "Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates", Cem. Concr. Compos., 31(2009) 622-627. https://doi.org/10.1016/j.cemconcomp.2009.06.005.
- Lam D. and Gardner, L. (2008), "Structural design of stainless steel concrete filled columns", J. Constr. Steel Res., 64(2008), 1275-1282. https://doi.org/10.1016/j.jcsr.2008.04.012.
- Li, J.T., Chen, Z.P., Xu, J.J., Jing, C.G. and Xue, J.Y. (2018), "Cyclic behavior of concrete-filled steel tubular column-reinforced concrete beam frames incorporating 100% recycled concrete aggregates", Adv. Struct. Eng., 21(12), 1802-1814 https://doi.org/10.1177/1369433218755521.
- Li, P., Yang, T., Zeng, Q., Xing, F. and Zhou, Y. (2021), "Axial stress-strain behavior of carbon FRP-confined seawater sea-sand recycled aggregate concrete square columns with different corner radii", Compos. Struct., 262, 113589. https://doi.org/10.1016/j.compstruct.2021.113589.
- Li, Y.L., Zhao, X.L., Raman, R.S. and Yu, X. (2018), "Axial compression tests on seawater and sea sand concrete-filled double-skin stainless steel circular tubes", Eng. Struct., 176, 426-438. https://doi.org/10.1016/j.engstruct.2018.09.040.
- Li, Y.L., Zhao, X.L., Singh, R.R. and Al-Saadi, S. (2016), "Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columns", Thin-Wall. Struct., 106, 390-406. https://doi.org/10.1016/j.tws.2016.05.014.
- Li, Y.L., Zhao, X.L., Singh, R.R. and Al-Saadi, S. (2016), "Tests on seawater and sea sand concrete-filled CFRP, BFRP and stainless steel tubular stub columns", Thin-Wall. Struct., 108, 163-184. https://doi.org/10.1016/j.tws.2016.08.016.
- Li, Z., Gao, M., Lei, Z., Tong, L., Sun, J., Wang, Y. and Jiang, X. (2023), "Ternary cementless composite based on red mud, ultrafine fly ash, and GGBS: Synergistic utilization and geopolymerization mechanism", Case Studies Construct. Mater., 19, e02410. https://doi.org/10.1016/j.cscm.2023.e02410.
- Long, X., Mao, M., Su, T., Su, Y. and Tian, M. (2023), "Machine learning method to predict dynamic compressive response of concrete-like material at high strain rates", Defence Technol., 23, 100-111. https://doi.org/10.1016/j.dt.2022.02.003.
- Ma, H., Dong, J., Liu, Y. and Guo, T. (2018), "Compressive behaviour of composite columns composed of RAC-filled circular steel tube and profile steel under axial loading", J. Construct. Steel Res., 143, 72-82. https://doi.org/10.1016/j.jcsr.2017.12.020.
- Mahgub, M., Ashour, A., Lam, D. and Dai, X. (2017), "Tests of self-compacting concrete filled elliptical steel tube columns", Thin-Wall. Struct., 110, 27-34. https://doi.org/10.1016/j.tws.2016.10.015.
- Mansour, W. and Fayed, S. (2021), "Flexural rigidity and ductility of RC beams reinforced with steel and recycled plastic fibers", Steel Compos. Struct., 41(3), 317-334.
- Manzi S., Mazzotti, C. and Bignozzi, M.C. (2017), "Self-compacting concrete with recycled concrete aggregate: Study of the long-term properties", Constr. Build. Mater., 157(2017), 582-590. https://doi.org/10.1016/j.conbuildmat.2017.09.129.
- Medina, N.F., Barluenga, G. and Hernandez-Olivares, F. (2015), "Combined effect of Polypropylene fibers and Silica Fume to improve the durability of concrete with natural Pozzolans blended cement", Construct. Build. Mater., 96, 556-566. https://doi.org/10.1016/j.conbuildmat.2015.08.050.
- Muciaccia G., Giussani, F., Rosati, G. and Mola, F. (2011), "Response of self-compacting concrete filled tubes under eccentric compression", J. Constr. Steel Res., 67(2011) 904-916. https://doi.org/10.1016/j.jcsr.2010.11.003.
- Pereira-de-Oliveira, L.A., Nepomuceno, M.C.S., Castro-Gomes, J. P. and Vila, M.D.F.C. (2014), "Permeability properties of self-compacting concrete with coarse recycled aggregates", Construct. Build. Mater., 51, 113-120. https://doi.org/10.1016/j.conbuildmat.2013.10.061.
- Qaidi, S., Al-Kamaki, Y., Hakeem, I., Dulaimi, A.F., Ozkilic, Y., Sabri, M. and Sergeev, V. (2023), "Investigation of the physical-mechanical properties and durability of high-strength concrete with recycled PET as a partial replacement for fine aggregates", Front. Mater., 10, 1101146.
- Ramesh R.B., Mirza, O. and Kang, W. (2019), "Mechanical properties of steel fiber reinforced recycled aggregate concrete", Struct. Concr. 20(2019) 745-755. https://doi.org/10.1002/suco.201800156.
- Ranjith S., Venkatasubramani, R. and Sreevidya, V. (2017), "Comparative study on durability properties of engineered cementitious composites with polypropylene fiber and glass fiber", Arch. Civ. Eng., 63(2017) 83-101.
- Raza A., Rafique, U. (2021), "Efficiency of GFRP bars and hoops in recycled aggregate concrete columns: Experimental and numerical study", Compos. Struct., 255(2021). https://doi.org/10.1016/j.compstruct.2020.112986.
- Raza, A., Manalo, A.C., Rafique, U. and AlAjarmeh, O.S. (2021), "Concentrically loaded recycled aggregate geopolymer concrete columns reinforced with GFRP bars and spirals", Compos. Struct., 268, 113968. https://doi.org/10.1016/j.compstruct.2021.113968.
- Sabau, M. and Vargas, J. (2018), "Use of e-plastic waste in concrete as a partial replacement of coarse mineral aggregate", Comput. Concrete, 21(4), 377-384. https://doi.org/10.12989/cac.2018.21.4.377.
- Sagoe-Crentsil K.K., Bro, T., Tam, V.W.Y., Soomro, M. and Evangelista, A.C.J. (2021), "Quality improvement of recycled concrete aggregate by removal of residual mortar: A comprehensive review of approaches adopted", Constr. Build. Mater., 288(2021) 123066. https://doi.org/10.1016/j.conbuildmat.2021.123066.
- Sagoe-Crentsil, K.K., Brown, T. and Taylor, A.H. (2001), "Performance of concrete made with commercially produced coarse recycled concrete aggregate", Cement Concrete Res., 31(5), 707-712. https://doi.org/10.1016/S0008-8846(00)00476-2.
- Sakino K., Nakahara, H., Morino, S. and Nishiyama, I. (2004), "Behavior of centrally loaded concrete-filled steel-tube short columns", J. Struct. Eng., 130(2004) 180-188. https://doi.org/https://ascelibrary.org/doi/10.1061/(ASCE)0733-9445(2004)130:2(180).
- Santos S., da Silva, P.R. and de Brito, J. (2019), "Self-compacting concrete with recycled aggregates - A literature review", J. Build. Eng., 22(2019) 349-371. https://doi.org/10.1016/j.jobe.2019.01.001.
- Singh, A., Wang, Y., Zhou, Y., Sun, J., Xu, X., Li, Y. and Wang, X. (2023), "Utilization of antimony tailings in fiber-reinforced 3D printed concrete: A sustainable approach for construction materials", Construct. Build. Mater., 408, 133689. https://doi.org/10.1016/j.conbuildmat.2023.133689.
- Sun, G., Kong, G., Liu, H. and Amenuvor, A.C. (2017), "Vibration velocity of X-section cast-in-place concrete (XCC) pile-raft foundation model for a ballastless track", Canadian Geotech. J., 54(9), 1340-1345. https://doi.org/10.1139/cgj2015-0623.
- Sun, L., Wang, C., Zhang, C., Yang, Z., Li, C. and Qiao, P. (2022), "Experimental investigation on the bond performance of sea sand coral concrete with FRP bar reinforcement for marine environments", Adv. Struct. Eng., 26(3), 533-546. https://doi.org/10.1177/13694332221131153.
- Thomas J., Thaickavil, N.N. and Wilson, P.M. (2018), "Strength and durability of concrete containing recycled concrete aggregates", J. Build. Eng., 19(2018) 349-365. https://doi.org/10.1016/j.jobe.2018.05.007.
- Tucci, F. and Vedernikov, A. (2021), "Design criteria for pultruded structural elements", Encyclopedia Mater. Compos., 3, 51-68. https://doi.org/10.1016/B978-0-12-819724-0.00086-0.
- Uy B., Tao, Z. and Han, L.H. (2011), "Behaviour of short and slender concrete-filled stainless steel tubular columns", J. Constr. Steel Res., 67(2011) 360-378. https://doi.org/10.1016/j.jcsr.2010.10.004.
- Vedernikov, A., Safonov, A., Tucci, F., Carlone, P. and Akhatov, I. (2021), "Analysis of spring-in deformation in L-shaped profiles pultruded at different pulling speeds: Mathematical simulation and experimental results", https://doi.org/10.25518/esaform21.4743.
- Wang Y., Chen, J. and Geng, Y. (2015), "Testing and analysis of axially loaded normal-strength recycled aggregate concrete filled steel tubular stub columns", Eng. Struct., 86(2015) 192-212. https://doi.org/10.1016/j.engstruct.2015.01.007.
- Wang, W., Jin, Y., Mu, Y., Zhang, M. and Du, J. (2023), "A novel tubular structure with negative Poisson's ratio based on gyroid-type triply periodic minimal surfaces", Virtual Phys. Prototyping, 18(1), e2203701. https://doi.org/10.1080/17452759.2023.2203701.
- Wang, X., Li, L., Xiang, Y., Wu, Y. and Wei, M. (2024), "The influence of basalt fiber on the mechanical performance of concrete-filled steel tube short columns under axial compression", Front. Mater., 10. https://doi.org/10.3389/fmats.2023.1332269.
- Wei, J., Ying, H., Yang, Y., Zhang, W., Yuan, H. and Zhou, J. (2023), "Seismic performance of concrete-filled steel tubular composite columns with ultra high performance concrete plates", Eng. Struct., 278, 115500. https://doi.org/10.1016/j.engstruct.2022.115500.
- Wu C.R., Zhu, Y.G., Zhang, X.T. and Kou, S.C. (2018), "Improving the properties of recycled concrete aggregate with bio-deposition approach", Cem. Concr. Compos., 94(2018), 248-254. https://doi.org/10.1016/j.cemconcomp.2018.09.012.
- Wu, Y., Wang, X., Fan, Y., Shi, J., Luo, C. and Wang, X. (2024), "A study on the ultimate span of a concrete-filled steel tube arch bridge", Buildings, 14(4), 896. https://doi.org/10.3390/buildings14040896.
- Xie, J., Kou, S.C., Ma, H., Long, W.J., Wang, Y. and Ye, T.H. (2021), "Advances on properties of fiber reinforced recycled aggregate concrete: Experiments and models", Construct. Build. Mater., 277, 122345. https://doi.org/10.1016/j.conbuildmat.2021.122345.
- Xiong M.X., Xu, Z., Chen, G.M. and Lan, Z.H. (2020), "FRP-confined steel-reinforced recycled aggregate concrete columns: Concept and behaviour under axial compression", Compos. Struct., 246(2020), https://doi.org/10.1016/j.compstruct.2020.112408.
- Xu G., Shen, W., Zhang, B., Li, Y., Ji, X. and Ye, Y. (2018), "Properties of recycled aggregate concrete prepared with scattering-filling coarse aggregate process", Cem. Concr. Compos., 93(2018) 19-29. https://doi.org/10.1016/j.cemconcomp.2018.06.013.
- Yang Y.F. and Ma, G.L. (2013), "Experimental behaviour of recycled aggregate concrete filled stainless steel tube stub columns and beams", Thin-Wall. Struct., 66(2013) 62-75. https://doi.org/10.1016/j.tws.2013.01.017.
- Yang Y.F., Han, L.H. (2006), "Experimental behaviour of recycled aggregate concrete filled steel tubular columns", J. Constr. Steel Res., 62(2006) 1310-1324. https://doi.org/10.1016/j.jcsr.2006.02.010.
- Yao, X., Lyu, X., Sun, J., Wang, B., Wang, Y., Yang, M. and Wang, X. (2023), "AI-based performance prediction for 3D-printed concrete considering anisotropy and steam curing condition", Construct. Build. Mater., 375, 130898. https://doi.org/10.1016/j.conbuildmat.2023.130898.
- Yu F., Chen, L, Bu, S., Huang, W. and Fang, Y. (2020), "Experimental and theoretical investigations of recycled self-compacting concrete filled steel tubular columns subjected to axial compression", Constr. Build. Mater., 248(2020) 118689. https://doi.org/10.1016/j.conbuildmat.2020.118689.
- Zeybek, O., Ozkilic, Y.O., Celik, A.I., Deifalla, A.F., Ahmad, M. and Sabri Sabri, M.M. (2022), "Performance evaluation of fiber-reinforced concrete produced with steel fibers extracted from waste tire", Front. Mater., 692. 9, 1057128.
- Zeybek, O., Ozkilic, Y.O., Karalar, M., Celik, A.I., Qaidi, S., Ahmad, J. and Burduhos-Nergis, D.P. (2022), "Influence of replacing cement with waste glass on mechanical properties of concrete", Materials, 15(21), 7513.
- Zhang Y., Luo, W., Wang, J., Wang, Y., Xu, Y. and Xiao, J. (2019), "A review of life cycle assessment of recycled aggregate concrete", Constr. Build. Mater., 209(2019) 115-125. https://doi.org/10.1016/j.conbuildmat.2019.03.078.
- Zhang, X., Liu, X., Zhang, S., Wang, J., Fu, L., Yang, J. and Huang, Y. (2023), "Analysis on displacement-based seismic design method of recycled aggregate concrete-filled square steel tube frame structures", Struct. Concrete, 24(3), 3461-3475. https://doi.org/10.1002/suco.202200720.
- Zhang, X., Zhou, G., Liu, X., Fan, Y., Meng, E., Yang, J. and Huang, Y. (2023), "Experimental and numerical analysis of seismic behaviour for recycled aggregate concrete filled circular steel tube frames", Comput. Concrete, 31(6), 537-543. https://doi.org/10.12989/cac.2023.31.6.537.