• 제목/요약/키워드: (5/3) transform

검색결과 751건 처리시간 0.04초

MODIS 지표 분광반사도 자료를 이용한 고품질 NDVI 시계열 자료 생성의 기법 비교 연구 (A comparative study for reconstructing a high-quality NDVI time series data derived from MODIS surface reflectance)

  • 이지혜;강신규;장근창;홍석영
    • 대한원격탐사학회지
    • /
    • 제31권2호
    • /
    • pp.149-160
    • /
    • 2015
  • 원격탐사 자료 기반의 식생지수 시계열 자료를 이용함에 있어서 가장 중요한 것은 구름이나 에어로졸에 의한 자료의 품질저하 문제이다. 이 연구에서는 MODIS09 지표 분광반사도 자료를 이용하여 구름영향에 의한 저품질 자료를 제거한 뒤 결손자료를 내삽, 평활하여 연속적인 Normalized Difference Vegetation Index (NDVI) 시계열 자료를 생산하였다. 구름에 의한 영향을 제거하기 위한 방법으로 MODIS 분광반사도 자료를 이용한 5가지의 구름탐지기법을 선정하여 비교, 평가하였다. 위성자료에서 제공하는 품질관리정보 (Quality Assessment, QA)에서 구름이라고 판단한 경우, MODIS09 Band 3 반사도가 10% 이상인 경우와 20% 이상인 경우, Cloud Detection Index (CDI)가 임계값 이상인 경우, 센서 천정각이 $32.25^{\circ}$ 이상인 경우를 각각 구름으로 판단하였다. 구름탐지로 인해 발생한 자료의 결손은 선형적 내삽 기법을 이용하여 보정한 뒤 Savitzky-Golay (S-G) 필터와 웨이브렛 변환을 각각 적용하여 평활하였다. 구름 탐지 기법은 10% 이상 Band 3 반사도 제거 기법(85%), Quality Control (QC) (82%), 20% 이상 Band 3 반사도 제거 기법(81%)의 순으로 높은 구름탐지율을 보였다. 웨이브렛 변환은 선형의 시계열 패턴을 얻을 수 있지만 원 자료의 최대값을 반영하지 못하는 반면 S-G 필터는 구름에 의한 신뢰도 낮은 값은 제거하면서도 NDVI 원 자료의 최대값을 유지하여 시계열 자료의 계절적 특성을 잘 보여주는 것을 확인하였다. 이 연구에서는 구름의 탐지, 결손 내삽, 평활 기법의 순차적인 자료처리기법을 적용하여 구름 영향을 제거한 고품질의 시계열 자료의 생산이 가능함을 확인하였다.

Isolation and Characterization of Comprehensive Polychlorinated Biphenyl-Degrading Bacterium, Enterobacter sp. LY402

  • Jia, Ling-Yun;Zheng, Ai-Ping;Xu, Li;Huang, Xiao-Dong;Zhang, Qing;Yang, Feng-Lin
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권5호
    • /
    • pp.952-957
    • /
    • 2008
  • A Gram-negative bacterium, named LY402, was isolated from contaminated soil. 16S rDNA sequencing and measurement of the physiological and biochemical characteristics identified it as belonging to the genus Enterohacter. Degradation experiments showed that LY402 had the ability to aerobically transform 79 of the 91 major congeners of Aroclor 1242, 1254, and 1260. However, more interestingly, the strain readily degraded certain highly chlorinated and recalcitrant polychlorinated biphenyls (PCBs). Almost all the tri- and tetra-chlorobiphenyls (CBs), except for 3,4,3',4'-CB, were degraded in 3 days, whereas 73% of 3,4,3',4'-, 92% of the penta-, 76% of the hexa-, and 37% of the hepta-CBs were transformed after 6 days. In addition, among 12 octa-CBs, 2,2',3,3',5,5',6,6-CB was obviously degraded, and 2,2',3,3',4,5,6,6'- and 2,2',3,3',4,5,5',6'-CB were slightly transformed. In a metabolite analysis, mono- and dichlorobenzoic acids (CBAs) were identified, and parts of them were also transformed by strain LY402. Analysis of PCB degradation indicated that strain LY402 could effectively degrade PCB congeners with chlorine substitutions in both ortho- and para-positions. Consequently, this is the first report of an Enterobacteria that can efficiently degrade both low and highly chlorinated PCBs under aerobic conditions.

Benzophenone과 알킬 그룹으로 Capping된 실리콘 나노입자의 안정성에 대한 산화 연구 (Investigation of Oxidation of Silicon Nanoparticles Capped with Butyl and Benzophenone against Its Stabilization)

  • 장승현
    • 통합자연과학논문집
    • /
    • 제3권3호
    • /
    • pp.133-137
    • /
    • 2010
  • New synthetic route and characterization of alkyl-capped nanocrystalline silicon (R-n-Si) were achieved from the reaction of silicon tetrachloride with sodium/benzophenone ketal reducing agent followed by n-butyllithium. Surface of silicon nanoparticles was derivatized with butyl group. Effect of oxidation of silicon nanoparticle with benzophenone was investigated for their stabilization. Optical characteristics of silicon nanoparticles were characterized by fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-vis), and photoluminescence (PL) spectroscopy. Butyl-capped silicon nanoparticles exhibited an emission band at 410 nm with excitation wavelength of 360 nm. Average size of n-butyl-capped silicon nanoparticles was obtained by particle size analyzer (PSA) and transmission electron microscopy (TEM). Average size of n-butyl-capped Si nanoparticles was about 6.5 nm.

Investigation of a New Red-Emitting, Eu3+-Activated MgAl2O4 Phosphor

  • Singh, Vijay;Haque, Masuqul;Kim, Dong-Kuk
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권12호
    • /
    • pp.2477-2480
    • /
    • 2007
  • MgAl2O4:Eu3+ red-light emitting powder phosphor was prepared at temperature as low as 500 oC within a few minutes by using the combustion route. The prepared powder was characterized by X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectrometry. The luminescence of Eu3+-activated MgAl2O4 shows a strong red emission dominant peak around 611 nm, which can be attributed to the 5D0-7F2 transition of Eu3+ ions from the synthesized phosphor particles under excitation (394 nm). Electron paramagnetic resonance (EPR) measurements at the X-band showed that no signal could be attributed to Eu2+ ions in MgAl2O4.

Study on Improvement of Diamond Deposition on Al2O3 Ceramic Substrates by a DC Arc Plasmatron

  • Kang, In-Je;Joa, Sang-Beom;Chun, Se-Min;Lee, Heon-Ju
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.457-457
    • /
    • 2012
  • We presented plasma processing using a DC Arc Plasmatron for diamond deposition on Al2O3 ceramic substrates. Plasma surface treatments were conducted to improve deposition condition before processing for diamond deposition. The Al2O3 ceramic substrates deposited, $5{\times}15mm^2$, were investigated by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD). Properties of diamond (111), (220) and (311) peaks were shown in XRD. We identified nanocrystalline diamond films on substrates. The results showed that deposition rate was approximately $2.2{\mu}m/h$ after plasma surface treatments. Comparing the above result with a common processing, deposition rate was improved. Also, the surface condition was improved more than a common processing for diamond deposition on Al2O3 ceramic substrates.

  • PDF

Automatic Registration between EO and IR Images of KOMPSAT-3A Using Block-based Image Matching

  • Kang, Hyungseok
    • 대한원격탐사학회지
    • /
    • 제36권4호
    • /
    • pp.545-555
    • /
    • 2020
  • This paper focuses on automatic image registration between EO (Electro-Optical) and IR (InfraRed) satellite images with different spectral properties using block-based approach and simple preprocessing technique to enhance the performance of feature matching. If unpreprocessed EO and IR images from Kompsat-3A satellite were applied to local feature matching algorithms(Scale Invariant Feature Transform, Speed-Up Robust Feature, etc.), image registration algorithm generally failed because of few detected feature points or mismatched pairs despite of many detected feature points. In this paper, we proposed a new image registration method which improved the performance of feature matching with block-based registration process on 9-divided image and pre-processing technique based on adaptive histogram equalization. The proposed method showed better performance than without our proposed technique on visual inspection and I-RMSE. This study can be used for automatic image registration between various images acquired from different sensors.

직접술폰화반응에 의한 부분불소화 Poly(vinylidene fluroide)(PVDF) 양이온교환막의 합성 및 특성 (Synthesis and Characteristics of Partially Fluorinated Poly(vinylidene fluroide)(PVDF) Cation Exchange Membrane via Direct Sulfonation)

  • 강기원;황택성
    • 멤브레인
    • /
    • 제25권5호
    • /
    • pp.406-414
    • /
    • 2015
  • 본 연구에서는 막 축전식 탈이온 공정에 적용하기 위해 온도와 시간을 달리하여 술폰화 Poly(VDF-co-hexafluoropropylene) copolymers (PVDF-co-HFP)을 합성 후 캐스팅법에 의해 양이온교환막이 제조되었다. 술폰화 PVDF (SPVDF)는 Fourier-transform infrared (FT-IR), $^1H$ Nuclear magnetic resonance ($^1H$ NMR)를 통해 구조확인을 하였고, X-ray Photoelectron Spectroscopy (XPS)를 통해 화학조성에 대한 정량적 분석을 하였다. 막 성능은 함수율 및 이온교환용량과 전기저항을 측정하였고. $60^{\circ}C$에서 7시간 술폰화한 SPVDF 멤브레인이 이온교환용량 0.89 meq/g, 함수율 21.5%, 전기저항 $3.70{\Omega}{\cdot}cm^2$로 가장 우수하였다. 수중 이온제거 특성을 막 축전식 탈이온 방법(MCDI)으로 전압(0.9~1.5 V), 유속(10~40 mL/min)을 변수로 SPVDF의 탈염 특성을 확인하여 MCDI 공정에 적용가능 여부를 평가하였다. MCDI 충방전 시험 결과 최대 탈염제거율은 62.5%이었다.

시간-주파수 영역에서의 국지 미소지진과 지하인공폭발의 구별 (Discrimination of Local Microearthquakes and Artificial Underground Explosions on the Basis of Time-Frequency Domain)

  • 김소구;박용철
    • 지질공학
    • /
    • 제7권1호
    • /
    • pp.63-79
    • /
    • 1997
  • 본 연구의 목적은 시간-주파수 영역에서의 미소지진과 인공폭발을 구별하는 것으로 미소지진과 인공폭발의 주파수특성을 연구하기 위해서 3차원 스펙트로그램(주파수, 시간, 진폭)을 이용하였다. 3차원 스펙트로그램은 국지 및 광역 거리에서 관측된 자료에 대하여 각각의 위상에 대한 주파수대역의 연구에 매우 유용한 방법이다. 채석장 발파로부터 관측된 P파와 S파는 Hz 이상에서 큰 진폭을 가졌고 또한 가까운 거리에서는 뚜렷한 Rg파가 관측되었다. 미소 지진의 경우 P파와 S파는 넓은 주파수 대역에서 큰 진폭이나타났다. 인공 폭발과 미소지진의 구별을 위해서는 10Hz 이하에서 Pg/Lg 스펙트럼 비를 이용하였고 각각의 위상에서의 정확한 시간창(time window)을 구하기 위해서 다중 필터 방법(MFM)을 이용하여 군속도를 계산하였다. 또한 3 성분 자료에 관해서는 자료의 순수한 P, SV, SH 성질을 구하기 위해 자유 표면에서의 영향을 보정하고 각각의 위상에 대하여 FFT을 실시하여 7개의 주파수 대역(0.5-3, 2-4, 3-5, 4-6, 5-7, 6-8, 8-10Hz)에서 Pg/Lg 스펙트럼 비를 계산하였다. 위의 과정을 통해 6-8Hz 대역에서 미소지진과 인공폭발이 가장 잘 구별되었다.

  • PDF

Pyramid VQ를 이용한 AMR-WB+ 코덱 내 TCX 모듈의 성능 개선 (Improvement of the TCX Module in AMR-WB+ Codec Using Pyramid VQ)

  • 박상국;박정은;백승권;서정일;강상원
    • 한국음향학회지
    • /
    • 제26권3호
    • /
    • pp.109-114
    • /
    • 2007
  • 본 논문은 AMR-WB+ 코덱의 오디오 품질을 개선하기 위하여 TCX모듈 변환계수 양자화기에 8차 및 16차 Pyramid VQ방식을 제안하였다. 제안된 Pyramid VQ 방식은 AMR-WB+ 코덱에 적용된 $RE_8$ Lattice VQ 방식과 비교 평가되었으며, 8차 및 16차 Pyramid VQ 방식의 사용시 Mean Squared Error (MSE)는 각각 4% 및 5.7% 개선되었고, Perceptual Evaluation of Audio Quality(PEAQ) 값은 각각 3.3% 및 4.7% 개선되었다.

산화 그래핀 나노플레이트릿을 강화제로 사용한 에폭시 도료의 역학적 특성 (Mechanical Properties of Epoxy Paint using Oxidized Graphene Nanoplatelet as a Reinforcement)

  • 서원우;김규용;윤민호;이보경;남정수
    • 한국건축시공학회지
    • /
    • 제17권5호
    • /
    • pp.465-471
    • /
    • 2017
  • 본 연구에서는 그래핀 나노플레이트릿(Graphene nanoplatelet ; GNP)의 분산에 대한 문제를 해결하고자 질산으로 이를 산화시켜 GO를 제조하였다. 이렇게 제조한 GO를 에폭시 도료에 혼입하기 전, 푸리에변환적외선분광법(Fourier transform infrared spectroscopy; FT-IR)을 이용한 화학조성 분석과 용매에서의 분산안정성을 확인하였다. 그 후, GNP, GO를 에폭시 도료에 0.1, 0.3, 0.5, 1.0wt.% 혼입하여 GNP/Epoxy, GO/Epoxy 도료를 제조하고 역학적 특성을 평가하였다. 실험 결과, FT-IR 분석을 통해 GO에서 하이드록시기, 에폭시기, 카르복시기 기능기가 생성된 것을 확인할 수 있었다. 또한, GO는 GNP보다 증류수와 에탄올에서 분산안정성이 향상되는 것을 확인하였다. 한편, GO/Epoxy 도료는 Neat Epoxy, GNP/Epoxy에 비해 역학적 특성이 향상되었으며, 특히 0.3wt.% 혼입률에서 높은 역학적 특성을 나타내었다. 따라서 GO를 에폭시 수지에 강화제로써 혼입할 경우 에폭시 도료의 역학적 특성을 향상시키는데 효과적인 것으로 판단된다.