• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.65-71
• /
• 1997

In this paper, we propose a new .mu.-controller design method using an equivalent weighting function $W_{\mu}$(s). The proposed mehtod is not guaranteed to converge to the minimum as D-K and .mu.-K iteration method. However, the robust performance problem can be converted into an equivalent $H^{\infty}$ optimization problem of unstructured uncertainty by using an equivalent weightng function $W_{\mu}$(s). Also we can find a .mu.-optimal controller iteratively using an error index $d_{\epsilon}$ of differnce between maximum singular value and .mu.-norm. And under the condition of the same order of scaling functions, the proposed method provides the .mu.-optimal controller with the degree less than that obtained by D-K iteration..

• Journal of the Chungcheong Mathematical Society
• /
• v.20 no.3
• /
• pp.245-259
• /
• 2007

We define and study a concept of $T^f$-space for a map, which is a generalized one of a T-space, in terms of the Gottlieb set for a map. We show that X is a $T_f$-space if and only if $G({\Sigma}B;A,f,X)=[{\Sigma}B,X]$ for any space B. For a principal fibration $E_k{\rightarrow}X$ induced by $k:X{\rightarrow}X^{\prime}$ from ${\epsilon}:PX^{\prime}{\rightarrow}X^{\prime}$, we obtain a sufficient condition to having a lifting $T^{\bar{f}}$-structure on $E_k$ of a $T^f$-structure on X. Also, we define and study a concept of co-$T^g$-space for a map, which is a dual one of $T^f$-space for a map. We obtain a dual result for a principal cofibration $i_r:X{\rightarrow}C_r$ induced by $r:X^{\prime}{\rightarrow}X$ from ${\iota}:X^{\prime}{\rightarrow}cX^{\prime}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1120-1126
• /
• 2000

Recently, in order to analyze the time series problems that occur in the nature word, and analyzing method using a neural electric network is being studied more than a typical statistical analysis method. A neural electric network has a generalization performance that is possible to estimate and analyze about non-learning data through the learning of a population. In this paper, after collecting weather datum that was collected from 1987 to 1996 and learning a population established, it suggests the weather forecasting system for an estimation and analysis the future weather. The suggested weather forecasting system uses 28*30*1 neural network structure, raises the total learning numbers and accuracy letting the selecting concentration learning about the pattern, that is not collected, using the descending epsilon learning method. Also, the weather forecasting system, that is suggested through a comparative experiment of the typical time series analysis method shows more superior than the existing statistical analysis method in the part of future estimation capacity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.701-704
• /
• 2003

In this study, to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, PSN-PNN-PZT system ceramics were manufactured as a function of CuO addition. Its dielectric and piezoelectric characteristics were investigated. With increasing the amount of CuO addition, grain size was increased and density increased until 0.3wt% CuO. Taking into consideration electromechanical coupling factor(kp) of 0.53, mechanical quality factor(Qm) of 423 and ${\epsilon}r$ of 1759, it can be cincluded that the CuO 0.5wt% added composition sintered at $920^{\circ}C$ is suitable for piezoelectric transformer application if Qm is improved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.439-442
• /
• 2004

The effects of sintering additives on the low-temperature sintering and microwave dielectric properties of $Mg_4Nb_2O_9$ dielectric ceramics were studied. When $3{\sim}20wt%$ of $0.242Bi_2O_3-0.758V_2O_5$ was added, the sintering temperature decreased from $1100{\sim}1300^{\circ}C$ to $950^{\circ}C$ and high density was obtained. When $Mg_4Nb_2O_9$ was sintered at $950^{\circ}C$ with 10wt% of sintering additive, the microwave dielectric properties of $Q{\times}f_0\;=\;80.035GHz,\;\epsilon_r\;=\;13.3\;and\;\tau_f\;=\;-12.9\;ppm/^{\circ}C$ were obtained.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.23-29
• /
• 2001

Three-dimensional flow through a tubular centrifugal fan with airfoil type blades are analyzed using CFX-TASCflow. Standard k - $\epsilon$ model and k - $\omega$ model are used as turbulence closures. The numerical schemes for convetion terms, i.e., Upwind Differencing Scheme(UDS), Mass Weighted Skewed Upstream Differencing Scheme(MWS), Linear Profile Skewed Upstream Differencing Scheme(LPS), and Modified Linear Profile Skewed Upstream Differencing Scheme(MLPS) are also tested. And, the performance of these schemes coupled with two turbulence models are evaluated. Computational static pressure distributions are compared with experimental data obtained in this work.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.419-424
• /
• 2001

TCV(Temperature control valve by pressure compensation) controls temperature constantly, when it is sending steam or high temperature water to heating device of heat exchanger. For designing TCV, the ratio of piston and hole diameters is one of the important design parameters. Numerical analysis is carried out to elucidate the flow characteristics in the TCV with different port areas of cold and hot waters, using the k-$\epsilon$ turbulence model and Cartesian cut-cell method. Numerical results show that the exit flow rate is mainly affected by pressure distribution in the piston.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.63-68
• /
• 2001

A numerical analysis to predict the flow characteristics in turbo fan for vacuum cleaner has been performed by using CFD. The rotating reference frame method is applied to compute the impeller-diffuser interaction and the characteristics of two models, 460 and 380, are calculated for various rotating speeds and flow rates. The flow in impeller, diffuser and return channel is assumed as steady and compressible. STAR-CD with k- $\epsilon$ turbulence model is used to solve the Navier-Stokes equations. Computed relative velocity, absolute pressure and flow angles are shown and compared with measurement results. The good agreement between the predictions and measurement results confirms the validity of this study.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.334-338
• /
• 2001

In order to investigate the effects of various injection hole shapes on the film cooling of turbine blade, three test models having cylindrical and shaped holes were used. A three-dimensional Navier-Stokes code with standard k-$\epsilon$ model was used to compute the film cooling coefficient on the film cooled turbine blade. Over 330,000 grids were used to compute the flow over the blade. Mainstream Reynolds number based on the cylinder diameter was $7.1{\times}10^4$. The turbulence intensity kept at $5.0\%$ for all inlets. The effect of coolant blowing ratio was studied for various blowing ratios. For each blowing ratios, wall temperatures around the surface of test model were calculated. Temperature was visualized using cartesian cut-cell method to obtain traces of the injected secondary air on the test surface, so we could interpret the film effectiveness as temperature distributions.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.454-459
• /
• 2001

The present study is concerned with the flow patterns induced by other impellers in a rectangular tank Impellers are FBT(Flat blade turbine), PBT(Pitched blade turbine), Shroud turbine, Rushton Turbine, and Helical ribbon turbine. The solution of flows in moving reference frames requires the use of 'moving' cell zone. The moving zone approaches are MRF(Multiple reference frame), which is a steady-state approximation and Sliding method, which is a unsteady-state approximation. Numerical results using two moving zone approaches are compared with experiments by Ranade & Joshi, which have done extensive LDA measurements of the flow generated by a standard six-bladed Rushton turbine in a cylindrical baffled vessel. In this paper we simulated the flow patterns with above mentioned moving zone approaches and impellers. Turbulence model is RNG k-$\epsilon$ model.