• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.1
• /
• pp.22-28
• /
• 2012

This experiment was conducted to find out high antioxidant activity varieties of chinese matrimony from the 131 accessions which conserved at Cheongyang Gugija Experiment Station. The status of the 131 accessions were composed 21 of local varieties, 20 of introduced species and 90 of improved races. The anti-oxidant activity using DPPH and $IC_{50}$, 45 accessions out of 90 showed high activity in free radical scavenging ability as less than $200{\mu}g/m{\ell}$ in improved races, while nine and six accessions from the introduced species and local varieties, respectively. At the stem part, the highest three anti-oxidant varieties among 131 accessions are "C0148-94", "D0148-72" and "Cheongdae", while China collection 1 in leaf part. Since "Cheongdae" is the progeny from the "Cheongyang Jaerae 5" and "Myungan" and those two varieties, "C0148-94" and "D0148-72" are from the Myungan and Cheongdae, high anti-oxidant activity can be inherited in Chinese matrimony vine.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.275-284
• /
• 2017

Rice quality should be considered as a primary consumer requirement. Regarding marketing, characteristics such as appearance, physicochemical properties, and palatability of brand rice are of high economic importance. Therefore, this study was conducted to select the optimal rice cultivars representing the commercial rice brands of Gyeongsangbuk-do province in Korea. Various rice grain quality components, grain appearance, several physicochemical properties of rice grain, and texture or palatability of cooked rice grains of ten cultivars (namely 'top quality rice') cultivated at three different locations, such as inland mountainous and southern plain areas of Gyeongsangbuk-do province in 2013~2014, were evaluated, and the obtained data was analyzed. 'Hiami' showed slightly higher protein contents and lower palatability of cooked rice than the other rice cultivars. Rice production and head rice yield produced at Gumi were the highest. The protein content of milled rice produced at Andong, an inland mountainous region, was approximately 0.3% point lower than that from other locations, whereas the amylose content of milled rice was approximately 1% point higher than those from the other plain regions, Daegu and Gumi. We evaluated the texture, Glossiness value determined using a Toyo teste meter and palatability of cooked rice of ten cultivars. The hardness of cooked rice produced in Andong was slightly lower than that produced in Daegu and Gumi, and additionally, the palatability of cooked rice produced in Andong was the best, followed by that producted in Gumi and Daegu. Considering rice yield and grain quality in the major rice cultivation areas of Gyeongsangbuk-do province, the rice cultivars that may be suitable for each region could be recommended mid-late maturation: 'Younghojinmi' and 'Mipum' in Daegu, 'Daebo', 'Samgwang', Chilbo' and 'Younghojinmi' in Gumi, 'Samgwang', 'Jinsumi' and 'Sukwang' in Andong. These results obtained in this study imply that the selected cultivars with high yield and quality could be recommended with high priority to rice farmers in the regions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.414-421
• /
• 2019

Pod shattering during the maturing stage causes a serious yield loss in soybean. It is the main limiting factor of soybean cultivation and mechanization. It is important to develop varieties suitable for mechanical harvesting and to develop energy-efficient agricultural machinery to save labor and costs. 'Daewonkong,' developed by the National Institute of Crop Science (NICS) in 1997, is an elite cultivar that occupies more than 80% of the soybean cultivation area in Korea because of its strong tolerance to pod shattering. The objectives of this study were to investigate the variation in pod shattering degree in a RIL population developed from a 'Daewonkong' parent and to select promising lines with pod shattering tolerance. 'Daewonkong' demonstrated a high level of tolerance to pod shattering compared to the 'Tawonkong' and 'Saeolkong' varieties, with no shattered pods after 72 hours of drying. Screening of pod shattering showed a clear distinction between the tolerant and susceptible varieties. Also, the distribution of shattering pod ratio in the two populations showed a similar pattern for three years. The promising lines with pod shattering tolerance included 27 lines in the 'Daewonkong'×'Tawonkong' population and 21 lines in the 'Daewonkong'×'Saeolkong' population. The promising lines are expected to be widely used as breeding parents for creating soybean cultivars with pod shattering tolerance.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.1
• /
• pp.47-53
• /
• 2011

$SF_6$ (Sulfur hexafluoride) possesses high GWP (Global Warming Potential) as sepcified by the IPCC (Intergonvernmental Panel of Climate Change). Recently, the recovery-separtion of $SF_6$ research area, including permeation properties studies using various membrane's materials and the practical operation of recovery-separtion using membrane of waste $SF_6$ gas is in the initial state. The separation efficiency of a single $SF_6$ and waste $SF_6$ mixture was evaluated using a PSF (polysulfone), PC (tetra-bromo polycarbonate) and PI (polyimide) hollow fiber membranes. According to the results of single gases permeation properties, PI membrane has the highest permselectivity of $N_2$ gas in $N_2/SF_6$ gas. Under the condition of P=0.5 MPa, the highest concentration of recovered $SF_6$ is 95.6 vol % in the separation experiment of $SF_6/N_2$ mixture gas by PC membrane. Under the operation pressure of P=0.3 MPa at a fixed retentate flow rate fixed of 150 cc/min, the maximum recovery efficiency of $SF_6$ is up to 97.8% by PSF membrane. From the results above, it is thought that the separation and recovery technique of $SF_6$ gas using membrane will be used as the representative eco-technology in the $SF_6$ gas treatment in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.577-583
• /
• 2007

To overcome certain disadvantages of past typical control techniques for toxic contaminants emitted from various industrial processes, the current study was conducted to establish a thermal catalytic system using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst and to evaluate catalytic thermal destruction of five chlorinated hydrocarbons[chlorobenzene(CHB), chloroform(CHF), perchloroethylene (PCE), 1,1,1-trichloroethane(TCEthane), trichloroethylene(TCE)]. In addition, this study evaluated the catalyst poison effect on the catalytic thermal destruction. Three operating parameters tested for the thermal catalyst system included the inlet concentrations, the incineration temperature, and the residence time in the catalyst system. The thermal decomposition efficiency decreased from the highest value of 100% to the lowest value of almost 0%(CHB) as the input concentration increased, depending upon the type of chlorinated compounds. The destruction efficiencies of the four target compounds, except for TCEthane, increased upto almost 100% as the reaction temperature increased, whereas the destruction efficiency for TCEthane did not significantly vary. For the target compounds except for TCEthane, the catalytic destruction efficiencies increased up to 30% to 97% as the residence time increased from 10 sec to 60 sec, but the increase of destruction efficiency for TCEthane stopped at the residence time of 30 sec, suggesting that long residence times are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Conclusively, the current findings suggest that when applying the transition-metal catalyst for the better destruction of chlorinated hydrocarbons, VOC type should be considered, along with their inlet concentrations, and reaction temperature and residence time in catalytic system. Meanwhile, the addition of high methyl sulfide(1.8 ppm) caused a drop of 0 to 50% in the removal efficiencies of the target compounds, whereas the addition of low methyl sulfide (0.1 ppm), which is lower than the concentrations of sulfur compounds measured in typical industrial emissions, did not cause.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.115-123
• /
• 2013

Stoker type incinerator is one of the most popular one used as municipal solid waste (MSW) incineration because, in general, it is quite suitable for large capacity and need no preprocessing facility. Nowadays, however, since the combustible portion of incoming MSW increases together with the decrease of the moisture content due to prohibition of directly burying food waste in landfill, the heating value of waste is remarkably increasing in comparison with the early stage of incinerator installation. Consequently, the increased heating value in incinerator operation causes a number of serious problems such as reduction of waste amount to be burned due to the boiler heat capacity together with the significant NO generation in high temperature environment. Therefore, in this study, a series of numerical simulation have been made as parameters of waste amount and the fraction of moisture in air stream in order to investigate optimal operating condition for the resolution of the problems associated with the high heating value of waste mentioned above. In specific, a detailed turbulent reaction flow field calculation with NO model was made for the full scale incinerator of D city. To this end, the injection method of moisturized air as oxidizer was intensively reviewed by the addition of moisture water amount from 10% and 20%. The calculation result, in general, showed that the reduction of maximum flame temperature appears consistently due to the combined effects of the increased specific heat of combustion air and vaporization heat by the addition of water moisture. As a consequence, the generation of NOx concentration was substantially reduced. Further, for the case of 20% moisture amount stream, the afterburner region is quite appropriate in temperature range for the operation of SNCR. This suggests the SNCR facility can be considered for reoperation. which is not in service at all due to the increased heating value of MSW.

• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.493-502
• /
• 2011

We study the deep structure of Korean Peninsula by estimating Moho depth and crustal thickness from using land and oceanic topography and free-air gravity anomaly data. Based on Airy-Heiskanen isostatic hypothesis, the correlated components between the terrain gravity effects and free-air gravity anomalies by wavenumber correlation analysis(WCA) are extracted to estimate the gravity effects that will be resulted from isostatic compensation for the area. With the resulting compensated gravity estimates, Moho depth that is a subsurface between the crust and mantle is estimated by the inversion in an iterative method with the constraints of 20 seismic depth estimates by the receiver function analysis, to minimize the uncertainty of non-uniqueness. Consequently, the average of the resulting crustal thickness estimate of Korean Peninsula is 32.15 km and the standard deviation is 3.12 km. Moho depth of South Korea estimated from this study is compared with the ones from the previous studies, showing they are approximately consistent. And the aspects of Moho undulation from the respective study are in common deep along Taebaek Mountains and Sobaek Mountains and low depth in Gyeongsang Basin relatively. Also, it is discussed that the terrain decorrelated free-air gravity anomalies inferring from the intracrustal characteristics of the crust are compared to the heat flow distributions of South Korea. The low-frequency components of terrain decorrelated Free-air gravity anomalies are highly correlated with the heat flow data, especially in the area of Gyeongsang basin where high heat flow causes to decrease the density of the rocks in the lower crust resulting in lowering the Moho depth by compensation. This result confirms that the high heat sources in this area coming from the upper mantle by Kim et al. (2008).

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.625-636
• /
• 2010

The geophysical characteristics and geological structure of the northeastern part of the Ulleung Basin were investigated from interpretation of geophysical data including gravity, magnetic, bathymetry data, and seismic data. Relative correction was applied to reduce errors between sets of gravity and magnetic data, obtained at different times and by different equipments. The northeastern margin of the Ulleung Basin is characterized by complicated morphology consisting of volcanic islands (Ulleungdo and Dokdo), the Dokdo seamounts, and a deep pathway (Korea Gap) with the maximum depth of -2500 m. Free-air anomalies generally reflect the topography effect. There are high anomalies over the volcanic islands and the Dokdo seamounts. Except local anomalous zones of volcanic edifices, the gradual increasing of the Bouguer anomalies from the Oki Bank toward the Ulleung Basin and the Korea Gap is related to higher mantle level and denser crust in the central of the Ulleung Basin. Complicated magnetic anomalies in the study area occur over volcanic islands and seamounts. The power spectrum analysis of the Bouguer anomalies indicates that the depth to the averaged Moho discontinuity is -16.1 km. The inversion of the Bouguer anomaly shows that the Moho depth under the Korea Gap is about -16~17 km and the Moho depths towards the Oki Bank and the northwestern part of Ulleung Island are gradually deeper. The inversion result suggests that the crust of the Ulleung Basin is thicker than normal oceanic crusts. The result of 20 gravity modeling is in good agreement with the results of the power spectrum analysis and the inversion of the Bouguer anomaly. Except the volcanic edifices, the main pattern of magnetization distribution shows lineation in NE-SW. The inversion results, the 2D gravity modeling, and the magnetization distribution support possible NE-SW spreading of the Ulleung Basin proposed by other papers.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.261-272
• /
• 2006

As we cannot think of our lives without a nation, it is closely related to almost every part of our daily lives. The role of government is becoming more important in the complex modern society as an essential element of national authority even though the government has indirect and secondary characteristics in its functional performance. Therefore, the government has to be efficient in planning and executing its policies, and it needs to be representative and fair as part of a national authoritative community. In the 21st century when symbolic and cultural importance of images are becoming more important, it is crucial for the government organizations to have an integrated identity design system that can satisfy both of these requirements of the government. However, the C.I.(Corporate Identity) of each Korean administrative branch has been developed separately and sporadically, which resulted in lack of consistency as part of the government. Shape and material of their C.I.s that follow short term design trend and popularity also lack uniqueness which can be distinguished from those of any private corporation. This may show that our government lacks systematic administrative capability, since image of a feature represents its characteristics and reality, and their recognition and evaluation from others become identity of the feature. In this perspective, the purpose of this thesis is to suggest an identity design system that has certain rules and regularity with wide variety of possible alterations for the central administration in Korea. In order to represent this visually, identity design system with both integrity and variety of possible alteration is created based on traditional Korean culture, especially the concept of Umyang-ohaeng and Samjae.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.1
• /
• pp.50-56
• /
• 2002

This experiment was carried out to obtain some information about overwintering, physiological and ecological characteristics of apple snails. Another purpose of this experiment was to characterize an appetite for rice plants by apple snails and to elucidate their choice of fresh green ones (vegetables, some other crops, weeds in rice fields). The freshwater snails were found with higher population at sites abundant organic compounds such as plant debris and at regions with high temperature. They also prefer calcium-rich water. This is a naturally occurring process. Apple snails were exceptionally veil-adapted to the south regions of Korea, especially Janghang, Jangseong and Haenam, even if the temperature of winter season is cold below 0$^{\circ}C$. Apple snails were not very selective in their food choice and eat almost everything available in their environment. A snail have something called a radula in its mouth for grinding up its food. A apple snail also chews on fruits and young succulent plant barks. In case of reproduction. apple snails deposit about 157$\sim$784 (average of 321 eggs) milky white to pale orange colored eggs above the waterline. In approximately every 22.4 seconds a new egg appears. The total time needed to deposit a egg mass varies from 58 minutes$\sim$4 hours 13 minutes. Apple snails reproduct actively from May to June and from September to October. An appetite of apple snails for rice plants was the different depending on their size and glowing stage for rice plants. Apple snails had a great appetite of rice plants as well as dropwort, tomato, cabbage, radish, aquatic plants etc. They preferred to eat young rice plants and drastically quit eating rice plants of over 40 cm in height. Thus considering the food preference of apple snail for various plants including rice, they were thought to be a potentially strong predator in fields, especially, at regions with warmer winter.