• Korean journal of applied entomology
• /
• v.54 no.3
• /
• pp.191-197
• /
• 2015

Fruit drop due to Eurytoma maslovskii infestations of Japanese apricot (Prunus mume) is a serious economic issue in most parts of Jeonnam Province, with the exception of the coastal areas such as Wando, Shinan, Yeosu, and Muan. The average incidence of fruit drop was 67% in 2013 and 33.3% in 2014. E. maslovskii larvae overwinter inside the pits of Japanese apricots. Larval survival rates decrease to less than 30% after a rainy summer season. The eggs are long oval of 0.68 mm, 0.29 mm and ivory white. Mature larva is of 6.56 mm, 3.18 mm. Free pupa are black, adult females and males of 6.97 mm, 4.90 mm lengths, respectively, while the ovipositor is 0.64 mm in length. Adult emergence occurs from early April to early May, when Japanese apricot fruits are from 4 mm to 17 mm in diameter. Adults persist for 13.5 d after emergence, and the sex ratio of females to males was found th be 45.9:54.1. Although up to four eggs may be oviposited per fruit, only one larva will ultimately survive, ans the larvae are cannibalistic. The period during which E. maslovskii is able to oviposit on Japanese apricots only lasts from mid- to late April (fruit diameter: 12~16 mm). When the diameter of the fruit is >16 mm, the pit of the Japanese apricot hardens and larvae have difficultly penetrating the stone. Therefore, the most effective method of controlling this pest is to spray orchards with a control agent 2~3 times, at 5 d intervals, beginning in mid- April.

• Journal of Bio-Environment Control
• /
• v.9 no.2
• /
• pp.85-93
• /
• 2000

This study was carried out to investigate the effects of several substrates and ratio of NO3--N to NH4--N in nutrient solution on growth, yield and mineral uptake of sweet pepper(Capsicum annuum L.) in bag culture. The content of minerals such as P, K, Ca and Mg showed difference in concentration among media: P and Mg were the highest in vermiculite in vermiculti+rice hull, K in perlite+vermiculite and Ca in perlite+peatmoss; with the lowest in the single perlite medium respectively, Ca of mineral made fairly higest level in concentration compared with the others in all of the media. The concentration of mineral content was lower in the ratio of 8:2 than that of 10:0. Admitting that the pH made difference depending on the kind of substrates and ratios of NO3--N to NH4--N. The pH of 10:0 ratio in all the substrates was higher and more stable than that of 8:2. The range of EC in all the substrates showed from 1.78ds·m-1 to 2.10 ds·m-1, which was optimum range for growth of sweet pepper, and range of EC is larger in 8:2 ratio than that in 10:0 ratio. Plant height and stem diameter were nothing to do with the kind of substrates, but leaf area was the largest at vermiculite+rice hull of the 8:2 ratio, fresh and dry weights were heavier at peatmoss+carbonized rice hull, but were the lightest at perlite. All indexes related to the growth which had something to do with the kind of substrates higher in 8:2 ratio than those in 10:0 ratio. The number of fruit and fresh weight related to the ratio of the 8:2 were the highest as 17.5 at vermiculite+rice hull with 1,588g of fresh weight, while the yield from perlite was the lowest. The number of fruit was the highest as 16.4 at virmiculite+rice hull, yield was the higest as 1,394a at perlite+ peatmoss. The yield of 8:2 ratio at all substrates was higher than that of 10:0 ratio. Of the mineral content related to the plant part, K+ and Mg2+ were higher in concentration at leaf; Ca2+ were higher at root; PO4- was higher at stem and fruit; The content of mineral showed no difference between the ratio of the 8:2 and the ratio of the 10:0 with no regrading to the difference of mineral content among substrates; and K+, Ca2+, and Mg2+ uptake of sweet pepper were higher at 10:0 ratio than that of 8:2; 2while PO4- uptake of sweet pepper was lower at 10:0 ratio than that of 8:2 ratio.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.51-56
• /
• 2015

The objective of this study was to evaluate the effect of silicate fertilizer on growth, physiology and abiotic stress tolerance of Chinese cabbage seedlings. Five silicate concentrations (8, 16, 32, 64, and 128mM) and control (non-treatment) were applied to Chinese cabbage seedlings twice a week. Three weeks after application of silicate treatment, seedlings were used for treating abiotic stresses and were assessed for growth and physiological characteristics. Growth parameters significantly increased in 8, 16, and 32mM treatments except 64 and 128mM. Total root surface area, total root length, and number of root tips increased in 8, 16 and 32mM treatments, but they decreased in treated seedlings with 64 and 128mM of silicate. The highest growth parameters and root morphology were observed in 8mM treatment. As for the effect on the seedling physiology, transpiration rates decreased while stomatal diffusive resistance increased to increasing silicate concentration. The application of silicate reduced the electrical conductivity, heating and chilling injury index at high and low temperatures. Silicate enhanced drought tolerance of Chinese seedlings by delaying the starting time of wilting point. The starting time of wilting point in the control was 3 days after discontinuation of irrigation, while in the 8, 64 and 128mM of silicate treatments were 4 days, and the 16 and 32mM treatments were 5 days. All plants were wilted after 5 days in control without irrigation whereas it showed in 8mM treatment after 6 days, in 16, 32, 64, 128mM treatments after 7 days.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.399-405
• /
• 2011

In this study, we evaluated the fruit quality indices and the incidence of physiological disorders of Korean new pear cultivar 'Whasan' to determine appropriate harvest time for exportation and to enhance storability and shelf-life of the fruits during simulated exportation and extending market environment under different temperature conditions. In the experiment of simulated exportation headed for North America including Canada and U.S.A., the fruits transported at $1^{\circ}C$ showed less weight loss than those of $5^{\circ}C$. Market temperature appeared as a key factor for keeping freshness of exported pear fruits rather than transportation temperature. Quality factors such as high flesh firmness and low incidence of fruit rot and physiological disorders including core breakdown and pithiness were attained at the fruits maintained at $18^{\circ}C$ when we compared with $25^{\circ}C$. The fruits of harvested early maturity at 135 day after full bloom showed 28.6 N of flesh firmness when the fruits stored at $1^{\circ}C$ of transportation and $18^{\circ}C$ of market temperature, while the fruits progressed $5^{\circ}C$ of transportation and $25^{\circ}C$ of market temperature dropped to 24.2 N during 30 days of shelf life. Also, a high incidences of physiological disorders and of fruit decay rates were obvious in the fruits distributed at $25^{\circ}C$ were observed approximately two times higher than the those of $18^{\circ}C$. Therefore, temperature management during marketing resulted as an important point for maintaining fruits quality in the process of pear fruit exportation.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.148-152
• /
• 2009

Numerous studies have presented evidence that global atmospheric carbon dioxide ($CO_{2}$ ) concentration and temperature is increasing every year. Both of the $CO_{2}$ and temperature are important components for photosynthesis activity of plants and thusgrowth and yield. However, little information is available in terms of the reaction of vegetable plants to increased $CO_{2}$ concentration and temperature, and also the reaction to a complex condition of both increased $CO_{2}$ concentration and temperature. The aim of this research was therefore to investigate changes in growth, photosynthetic activity and ultra-cellular structure of leaf tissue of Chinese cabbage. Plants were grown under either of elevated $CO_{2}$ concentration (elevated $CO_{2}$, 2-fold higher than atmospheric $CO_{2}$ ) or elevated temperature (elevated temp, 4$^{\circ}C$ higher than atmospheric temperature), under both of elevated $CO_{2}$ concentration and elevated temperature (elevated temp+$CO_{2}$), and under atmospheric $CO_{2}$ concentration and temperature (control). The treatment of 'elevated temp' negatively affected leaf area, fresh weight, chlorophyll and starch content. However, when the treatment of 'elevated temp' was applied coincidently with the treatment of 'elevated $CO_{2}$', growth and photosynthetic performance of plants were as good as those in the treatment of 'elevated $CO_{2}$', Microscopic study resulted that the highest starch content and density of cells were observed in the leaf tissue grown at the treatment of 'elevated $CO_{2}$', whereas the lowest ones were observed in the leaf tissue grown at the treatment of 'elevated temp'. These results suggest that when Chinese cabbage grows under a high-temperature condition, supplement of $CO_{2}$ would improve the growth and yield. In our knowledge, it is the first time to determine the effect of a complex relationship between the increased $CO_{2}$ concentration and temperature on the growth of Chinese cabbage.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.319-325
• /
• 2018

The aim of the present study was to determine the influence of different fertilizer combinations on the growth, yield, and fruit quality of 'Duke' blueberry cultivar and the water quality of growth medium. The experiment was carried out with three year old 'Duke' blueberry bushes which were cultivated in containers ($60{\times}80{\times}40cm$) filled with 130 L peat moss and 40 L pearlite (v/v). Sawdust was used as the mulch in growth containers. Three different fertilizer combinations (FC) i.e., FC-1 consisted with standard solution, FC-2 consisted with nitrogen reduced by 10% from FC-1, and FC-3 consisted with nitrogen reduced by 20% from FC-1 were tested while, the ground water used as the control. The effects of different fertilizer combinations on shoot diameter, shoot length, number of shoots, leaf length, SPAD value (the relative content of chlorophyll), berry weight, soluble solids content, titratable acidity, and yield per bush in 'Duke' blueberry were examined. Also, the effects of different fertilizer combinations on pH, EC, $NH_4$ and $NO_3$ in 'Duke' blueberry growth medium were monitored. The highest pH and lowest EC, $NH_4$ and $NO_3$ in growth medium was recorded with control treatment during the experiment period. The maximum shoot diameter (3.7 mm) and shoot length (35.7 cm) was recorded for the FC-1. Highest number of shoots (47%) were recorded from 'Duke' blueberry bushes supplemented with FC-1 compared to other treatments. The fertilizer combinations supplemented with nitrogen showed significant influence on leaf length and SPAD value compared to control 'Duke' blueberry bushes. However, the fruit quality attributes, i.e., berry weight, soluble solids content, and titratable acidity were not significant different among fertilizer treatments. The significantly highest yields per bush were recorded for FC-1, FC-2, and FC-3, as 2.2, 2.9, and 2.7 kg, respectively compared to control (0.2 kg). Although, the FC-1 was supplemented with highest nitrogen content it resulted low yield per bush while having high number of shoots and vigorous growth.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.189-195
• /
• 2020

This research was carried out to find the proper number of stem training and position of fruit setting that can be stably produced for the cultivation in small and medium types of watermelon during winter. The treatments for the number of stem training were 2-, 3-, 4-stems, respectively. Growth characteristics (plant height, stem diameter, no. of node, etc.) by number of stem training were higher in 2-stem than in 3-4-stem. However, Fruit characteristics such as weight, length, width were high in the 4-stem. There is no significant difference between the soluble solids and fruit setting rate depending on the stem training. The position of fruit setting were three points: 2nd, 3rd, 4th female flower positions. The fruit setting is one fruit per plant. The average fruit setting nodes of 2^nd, 3^rd and 4^th female flowers were 11.5, 15.8 and 23.1 nodes, respectively. The 4^th female flower was 0.8 kg heavier than 2^nd female flower because of its increased weight as position of fruit setting was higher. However, the soluble solids decreased as the position of fruit setting increased, with the second female flower being 1.3°Bx higher than the 4^th female flower. The Fruit setting rate was no significant difference. Considering the growth and fruit characteristics, it is believed that the small and medium-sized watermelon in winter will have a high quality production of watermelon when the stem training is 3-stem and the position of fruit setting is 3^rd female flower. However, it is thought that additional studies are needed to stabilize the income of watermelon-growing farms, such as planting distance and adhesion of small and medium-sized varieties.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.141-152
• /
• 2020

The rapid on-site measurement of hydroponic nutrients allows for the more efficient use of crop fertilizers. This paper reports on the development of an embedded on-site system consisting of multiple ion-selective electrodes (ISEs) for the real-time measurement of the concentrations of macronutrients in hydroponic solutions. The system included a combination of PVC ISEs for the detection of NO₃, K, and Ca ions, a cobalt-electrode for the detection of H₂PO₄, a double-junction reference electrode, a solution container, and a sampling system consisting of pumps and valves. An Arduino Due board was used to collect data and to control the volume of the sample. Prior to the measurement of each sample, a two-point normalization method was employed to adjust the sensitivity followed by an offset to minimize potential drift that might occur during continuous measurement. The predictive capabilities of the NO₃ and K ISEs based on PVC membranes were satisfactory, producing results that were in close agreement with the results of standard analyzers (R² = 0.99). Though the Ca ISE fabricated with Ca ionophore II underestimated the Ca concentration by an average of 55%, the strong linear relationship (R² > 0.84) makes it possible for the embedded system to be used in hydroponic NO₃, K, and Ca sensing. The cobalt-rod-based phosphate electrodes exhibited a relatively high error of 24.7±9.26% in the phosphate concentration range of 45 to 155 mg/L compared to standard methods due to inconsistent signal readings between replicates, illustrating the need for further research on the signal conditioning of cobalt electrodes to improve their predictive ability in hydroponic P sensing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.91-97
• /
• 2017

This study contains research on a bio-monitoring system (BMS) capable of detecting abnormal high water temperatures, the shell valve movements (SVMs) of Pacific oysters (Crassostrea gigas), which were measured at four different temperature (5, 10, 20 and $30^{\circ}C$) under laboratory conditions. All the Pacific oysters were kept under fasting conditions for 3 days to prevent the influence of food and excretions before the onset of the experiments. SVMs did not detect at $5^{\circ}C$. However, SVMs increased with an increase in temperature (at $10^{\circ}C$ : $6.31{\pm}2.18times/hr$ and at $20^{\circ}C$: $22.0{\pm}10.0times/hr$). At $30^{\circ}C$, SVMs were divided into two groups: those with no SVMs as at $5^{\circ}C$ and those with SVMs similar to conditions at $20^{\circ}C$($23.9{\pm}9.35times/hr$). This indicates oyster shells maintain a closed condition due to a decrease in metabolism at $30^{\circ}C$, although some Pacific oysters had active SVMs due to an increase in metabolism. If a BMS using the SVM status of Pacific oysters was installed to monitor abnormal high water around oyster farms, early warning levels and serious alerts might be made available more rapidly for SVMs of more than ca. 30 times/hr and closing conditions in a matter of hours, respectively. Therefore, a BMS using the SVMs of Pacific oysters might be an effective early warning system for abnormal high water temperatures.