• 제목/요약/키워드: $pH_u$

검색결과 1,698건 처리시간 0.035초

중학생의 혈액 중 중금속 모니터링 (The Monitoring of Heavy Metals in Human Bloods of Middle School Students)

  • 박희라;김미혜;권기성;김순기;허수정;김광진;염태경;최광식;김수연
    • 한국식품위생안전성학회지
    • /
    • 제20권2호
    • /
    • pp.83-88
    • /
    • 2005
  • 1 혈액 중 중금속 분석방법을 확립하기 위하여 GF-hAS를 이용하여 microwave digestion 방법과 혈액희석법의 검출한계 및 회수율을 비교 검토한 결과 혈액희석법이 검출한계 및 회수율이 우수하였으며, 표준시료(CRM)를 이용한 시험방법에 대한 검증에서 만족스런 결과를 나타내었음. 2.중학생 300명을 대상으로 혈액 중 중금속함량을 GF-AhS를 이용하여 측정한 결과 납과 아연에서 남학생이 여학생에 비해 유의적으로 높은 수치를 보였으며,납의 함량은 남학생 약 4 ug/dL, 여학생 약 3 u즈d트으_로 WHO의 권고치 20 uUdL, 미국질병관리센터의 어린이에 대한 권고치 10 ug/dL에 미달하는 수준이었음. 3. 카드윰은 남, 여 모두 평균 0.06 ug/dl으로 WHO의 일반인 권고치 0.5 ug/dL보다 훨씬 낮은 수치를 나타내었음. 4. 또한 아연의 경우 남학생 약 106 ug/dL, 여학생 약 93 ug/dL으로 혈청 정상치인 64-118 ug/dL에 해당하는 수치이었음 5. 구리는 남 $\cdot$ 여학생 모두 약 99 ufdL로 혈청 정상치인 80-121 ug/dL범위내로 나타났음. 6. 남$\cdot$녀 학생 중 빈혈집단과 정상인과의 중금속함량을 분석한 결과 여학생의 빈혈 집단에서 정상집단 보다 납 함량이 다소 높게 나타났음(P>0.05). 7. 혈액 중 납과 철분 간에 음의 상관관계가, 납과 아연간에는 양의 상관관계가 관찰되었음(P<0.001).

비교원성 단백질이 상아질 접착제의 결합강도와 교원질의 형태에 미치는 영향 (THE EFFECT OF THE REMOVAL OF CHONDROITIN SULFATE ON BOND STRENGTH OF DENTIN ADHESIVES AND COLLAGEN ARCHITECTURE)

  • 김종률;박상진;최기운;최경규
    • Restorative Dentistry and Endodontics
    • /
    • 제35권3호
    • /
    • pp.211-221
    • /
    • 2010
  • 본 연구는 상아질의 비교원성 단백질을 chondroitinase ABC (C-ABC)를 이용하여 제거함으로써 비교원성 단백질의 제거가 상아질 접착제의 미세인장결합강도와 교원질망의 형태에 미치는 영향을 상아질의 다양한 습윤상태에 따라 평가하고자 시행하였다. 비교원성 단백질의 상아질접착제의 미세인장강도에 대한 영향을 평가하기 위해 제 3대구치의 상아질을 노출시키고, 두 군으로 나누고 한 군은 C-ABC, 다른 군은 증류수를 $37^{\circ}C$에서 48시간 동안 적용한 후, 상아질의 습윤상태(wet, dry 및 re-wet)와 상아질 접착제(Single Bond 2, One Step Plus)를 다르게 이용하여 복합레진을 수복하였다. 24시간 후 가로 1 mm, 세로 1mm의 시편을 제작하고 미세인장강도를 측정하였다. 상아질 교원질의 형태변화를 관찰하기 위하여 상아질 시편에 산부식을 시행하고 C-ABC 적용 후, 시편을 제작하였고 미세인장강도 측정후 파괴된 접착면의 파괴양상과 각 접착제의 접착계면 관찰을 위하여 FE-SEM 관찰하였다. C-ABC 처리여부와 관계없이 습윤한 상아질면에 접착한 군은 모든 접착제에서 통계학적으로 유의성있는 미세인장결합강도의 차이를 나타나지 않았다(p > 0.05). C-ABC를 적용하였을 경우, Single Bond 2에서는 재수화한 상아질면에 접착한 군이 습윤한 상아질면에 접착한 군에 비해 미세인장결합강도가 감소하였다(p < 0.05). FE-SEM 관찰결과, C-ABC를 적용후에는 접착성 파괴가 주로 일어났으며, 교원질 섬유간 거리가 증가하였으며 부분적으로 교원질 섬유들간에 응집된 양상이 관찰되었다.

Flowable 및 microfill 복합레진으로 충전된 제 5급와동에서 load cycling 전,후의 미세변연누출 비교 (MICROLEAKAGE OF MICROFILL AND FLOWABLE COMPOSITE RESINS IN CLASS V CAVITY AFTER LOAD CYCLING)

  • 강석호;김오영;오명환;조병훈;엄정문;권혁춘;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제27권2호
    • /
    • pp.142-149
    • /
    • 2002
  • Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite[AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2% methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p<0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R>A =H=M>D>Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p<0.05).

옥천대(沃川帶) 우라늄광층(鑛層)의 구조규제(構造規制) 및 지구화학적(地球化學的) 특성연구(特性硏究) (Lithologic and Structural Controls and Geochemistry of Uranium Deposition in the Ogcheon Black-Slate Formation)

  • 이대성;윤석규;이종혁;김정택
    • 자원환경지질
    • /
    • 제19권spc호
    • /
    • pp.19-41
    • /
    • 1986
  • Structural, radioactive, petrological, petrochemical, mineralogical and stable isotopic study as well as the review of previous studies of the uranium-bearing slates in the Ogcheon sequence were carried out to examine the lithological and structural controls, and geochemical environment in the uranium deposition in the sequence. And the study was extended to the coal-bearing formation (Jangseong Series-Permian) to compare the geochemical and sedimentologic aspects of uranium chemistry between Ogcheon and Hambaegsan areas. The results obtained are as follows: 1. The uranium mineralization occurs in the carbonaceous black slates of the middle to lower Guryongsan formation and its equivalents in the Ogcheon sequence. In general, two or three uranium-bearing carbonaceous beds are found with about 1 to 1.5km stratigraphic interval and they extend from Chungju to Jinsan for 90km in distance, with intermittent igneous intrusions and structural Jisturbances. Average thickness of the beds ranges from 20 to 1,500m. 2. These carbonaceous slate beds were folded by a strong $F_1$-fold and were refolded by subsequent $F_1$-fold, nearly co-axial with the $F_1$, resulting in a repeated occurrence of similar slate. The carbonaceous beds were swelled in hing zones and were shrinked or thined out in limb by the these foldings. Minor faulting and brecciation of the carbonaceous beds were followed causing metamorphism of these beds and secondary migration and alteration of uranium minerals and their close associations. 3. Uranium-rich zones with high radioactive anomalies are found in Chungju, Deogpyong-Yongyuri, MiwonBoun, Daejeon-Geumsan areas in the range of 500~3,700 cps (corresponds to 0.017~0.087%U). These zones continue along strike of the beds for several tens to a few hundred meters but also discontinue with swelling and pinches at places that should be analogously developed toward underground in their vertical extentions. The drilling surveyings in those area, more than 120 holes, indicate that the depth-frequency to uranium rich bed ranging 40~160 meter is greater. 4. The features that higher radioactive anomalies occur particularly from the carbonaceous beds among the argillaceous lithologic units, are well demonstrated on the cross sections of the lithology and radioactive values of the major uranium deposits in the Ogcheon zone. However, one anomalous radioactive zone is found in a l:ornfels bed in Samgoe, near Daejeon city. This is interpreted as a thermal metamorphic effect by which original uranium contents in the underlying black slate were migrated into the hornfels bed. 5. Principal minerals of the uranium-bearing black slates are quartz, sericite, biotite and chlorite, and as to chemical composition of the black slates, $Al_2O_3$ contents appear to be much lower than the average values by its clarke suggesting that the Changri basin has rather proximal to its source area. 6. The uranium-bearing carbonaceous beds contain minor amounts of phosphorite minerals, pyrite, pyrrhotite and other sulfides but not contain iron oxides. Vanadium. Molybdenum, Barium, Nickel, Zirconium, Lead, Cromium and fixed Carbon, and some other heavy metals appear to be positive by correlative with uranium in their concentrations, suggesting a possibility of their genetic relationships. The estimated pH and Eh of the slate suggests an euxenic marine to organic-rich saline water environment during uranium was deposited in the middle part of Ogcheon zone. 7. The Carboniferous shale of Jangseong Series(Sadong Series) of Permian in Hambaegsan area having low radioactivity and in fluvial to beach deposits is entirely different in geochemical property and depositional environment from the middle part of Ogcheon zone, so-called "Pibanryong-Type Ogcheon Zone". 8. Synthesizing various data obtained by several aspects of research on uranium mineralization in the studied sequence, it is concluded that the processes of uranium deposition were incorporated with rich organic precipitation by which soluble uranyl ions, $U{_2}^{+{+}}$ were organochemically complexed and carried down to the pre-Ogcheon sea bottoms formed in transitional environment, from Red Sea type basin to Black Sea type basin. Decomposition of the organic matter under reducing conditions to hydrogen sulfide, which reduced the $UO{_2}^{+2}$ ions to the insoluble uranium dioxide($UO_2$), on the other side the heavy metals are precipitated as sulfides. 9. The EPMA study on the identification of uraninite and others and the genetic interpretation of uranium bearing slates by isotopic values of this work are given separately by Yun, S. in 1984.

  • PDF

생쥐 초기 2-세포 배의 세포내 칼슘 증가에 미치는 Acetylcholine의 영향 (The Effect of Acetylcholine on the Intracellular $Ca^{2+}$ Increase of the Mouse Early 2-cell Embryos)

  • 윤숙영;강다원;배인하
    • 한국수정란이식학회지
    • /
    • 제20권3호
    • /
    • pp.191-200
    • /
    • 2005
  • 체외 배양 과정 중에 나타나는 생쥐 초기 2-세포 배의 "in vitro 2-cell block" 현상은 세포내 $Ca^{2+}$ 농도 변화와 밀접한 관련이 있다. 다양한 종류의 세포에서 acetylcholine은 세포막에 존재하는 muscarnic acetylcholine receptor를 통해 세포내 $Ca^{2+}$ 농도 증가를 유도한다. 본 실험에서는 생쥐 "in vitro 2-cell block" 현상에 있어서 ACh의 영향을 알아보기 위해 세포 내 $Ca^{2+}$ 농도 조절 물질을 처리한 후, 공초점 현미경을 이용하여 세포 내 $Ca^{2+}$ 농도 변화를 기록하였다. ACh은 세포 내에서 농도 의존적으로 $Ca^{2+}$ 농도 증가를 유도하며, "in Vitro 2-cell block" 현상을 극복하여 포배기로 발생을 유도하였다. ACh에 의한 $Ca^{2+}$ 농도 증가가 세포막에 존재하는 ACh receptor를 경유하여 나타나는 반응인지를 알아보기 위해 ACh receptor의 저해제인 atropine을 전처리한 결과, ACh에 의한 $Ca^{2+}$ 농도 증가가 완전히 저해되었다. 초기 2-세포 배에서 ACh이 결합하는 receptor의 종류를 확인하기 위하여 carbachol과 nicotin tartrate를 처리 하였다. Nicotinic AChR의 agonist인 nicotine tartrate 1 mM은 세포내 $Ca^{2+}$ 농도 증가를 보이지 않았다. 따라서 초기 2-세포 배의 세포막에는 muscarnic AChR가 기능적으로 작용함을 알 수 있다. ACh에 의한 세포내 $Ca^{2+}$ 농도 증가가 $Ca^{2+}$이 제거된 배양액에서도 나타나는 것으로 보아 ACh에 의한 세포내 $Ca^{2+}$ 변화는 주로 소포체와 같은 세포내 $Ca^{2+}$ 저장고로부터 분비됨을 알 수 있었다. 이러한 세포내 $Ca^{2+}$ 저장고로부터의 $Ca^{2+}$ 분비가 어떤 신호전달체계를 통해 나타나는 지를 조사하였다. 세포막의 PLC 저해제인 U73122를 전처리한 배는 ACh에 의한 $Ca^{2+}$ 농도 증가가 나타나지 않았으며, 세포 내 $Ca^{2+}$ 통로인 IP3R와 RyR의 저해제인 xestospongin과 heparin 혹은 dantrolene을 전처리한 결과 dantrolene에 의해 세포내 $Ca^{2+}$ 농도 증가가 억제되었다. 그리고 세포내 반복적인 $Ca^{2+}$ 농도 증가에 의해 활성도가 변화는 CaMKII의 작용을 확인하기 위하여 Ca MKII의 저해제인 KN-93을 전처리한 결과 $Ca^{2+}$ 농도 증가가 억제되는 것을 확인하였다. 이상의 결과로부터 ACh은 생쥐 초기 2-세포 배에서 ryano-dine receptor를 통하여 세포내 $Ca^{2+}$ 저장고로부터 $Ca^{2+}$ 분비를 유도하며, CaM KII에 의해서도 영향을 받는 것으로 보여진다. 생쥐 초기 2-세포 배에서 "in vitro 2-cell block"의 극복은 ACh에 의해 유도된 신호전달체계를 통해 세포내에 증가하는 $Ca^{2+}$ 농도 및 이에 따른 세포내 대사 작용의 활성화에 의하여 나타나는 것으로 생각된다.

액체-입자 Swirling 유동층에서 유동입자 흐름 및 열전달 특성 (Characteristics of Particle Flow and Heat Transfer in Liquid-Particle Swirling Fluidized Beds)

  • 손성모;강석환;강 용;김상돈
    • Korean Chemical Engineering Research
    • /
    • 제44권5호
    • /
    • pp.505-512
    • /
    • 2006
  • 직경이 0.102 m이고 높이가 2.5 m인 액체-입자 swirling(나선)흐름 유동층에서 유동 입자의 흐름 및 열전달 특성을 고찰하였다. 액체유속($U_L$), 유동 입자의 크기($d_p$) 그리고 연속상인 액체의 나선 유도흐름 액체량의 비($R_s$)가 유동층 내 유동입자의 체류량 유동층 내부 열원과 유동층간의 총괄 열전달 계수에 미치는 영향을 검토하였다. 액체-입자 나선흐름 유동층에서 입자 체류량은 입자의 크기와 나선유도흐름 액체량의 비가 증가함에 따라서 증가하였으나, 액체유속의 증가에 따라서는 감소하였다. 유동층 내부에서 나선 유도 흐름 액체량의 비가 0.1~0.3인 경우에 유동 입자의 국부체류량은 유동층 중심부에서 큰 값을 나타내었으나, $R_s$의 값이 0.5일 때는 반경 방향 입자 체류량은 거의 균일한 분포를 보이며, $R_s$의 값이 0.7일 때는 유동층 중심부의 입자 체류량이 상대적으로 감소하는 경향을 나타내었다. 유동층 내부열원과 유동층간의 열전달 특성은 열원 표면과 유동층간의 온도차 요동 자료의 위상공간 투영과 kolmogorov 엔트로피 해석으로 고찰할 수 있었으며, 나선 유도 흐름 액체량의 비($R_s$)가 0.1에서 0.5까지 증가할수록 온도차 요동 자료의 위상공간 투영은 점점 안정되고 규칙성이 증대되는 상태를 나타내고, kolmogorov 엔트로피 값은 감소하는 경향을 나타내었다. 열원 표면과 유동층간의 온도차 요동 자료의 kolmogorov 엔트로피 값은 액체의 유속이 증가함에 따라 최대값을 나타내었다. 열원과 유동층간의 총괄 열전달 계수는 액체유속, 층공극률, 나선 유도 흐름 액체량의 비가 증가함에 따라서 최대값을 나타내었으며, 유동 입자의 크기가 증가함에 따라 증가하였다. 내부 열원과 유동층간의 총괄 열전달 계수가 최대값을 나타낼 때의 액체의 유속 조건에서 온도차 요동자료의 kolmogorov 엔트로피의 값도 최대값을 나타내었다. 액체-입자 나선흐름 유동층에서 입자 체류량과 열전달 계수를 무차원군의 상관식으로 나타낼 수 있었다.

급성 충수염 - 2006년 대한소아외과학회회원 대상 전국조사 - (Acute Appendicitis -A Survey by the Korean Association of Pediatric Surgeons in 2006-)

  • 이석구;김대연;김상윤;김성철;김신곤;김우기;김인구;김재억;김재천;박귀원;박우현;서정민;송영택;오정탁;이남혁;이두선;이명덕;이성철;장수일;전용순;정상영;정성은;정을삼;정풍만
    • Advances in pediatric surgery
    • /
    • 제13권2호
    • /
    • pp.203-211
    • /
    • 2007
  • 본 조사 결과는 21개 병원에서 수술 받은 환자 476명의 기록에 대한 전향적인 분석과 23명의 회원에 대한 설문 응답지에 의한 것이다. 미리 환자등록지를 배부하여 6개월 간 전향적으로 기록한 것으로 그 의의가 크다고 할 수 있다. 그러나 전향적 연구계획에 의한 것이 아니므로 통계적인 비교는 시도하지 않았고 급성충수염에 대한 회원들의 전체적인 의견과 성향을 파악하는데 중심을 두었다. 복강경수술은 아직 전체 충수절제술의 30 %에 못 미치고 있으나 설문지에 답한 회원 약 50 %가 복강경 충수절제술을 시행하고 있으며 이 숫자는 계속 증가할 것으로 보인다. 그러나 복강경수술의 결과는 아직 개복수술과 크게 차이가 없는 것으로 보인다. 한편 단순충수염에 대한 예방적 항생제투여 방법과 기간 등에 대한 설문결과에 큰 차이가 있어 이에 대한 학회 중심의 논의가 필요하다고 생각한다.

  • PDF

흰깔대기버섯의 배양적 특성 및 인공재배에 관한 연구 (Cultural Characteristics and Artificial Cultivation of Edible Mushroom, Clitocybe maxima)

  • 김민경;김동욱;강희완;서건식
    • 현장농수산연구지
    • /
    • 제20권1호
    • /
    • pp.35-47
    • /
    • 2018
  • 흰깔대기버섯(Clitocybe maxima) 총 6균주를 한국, 중국, 대만에서 수집 확보하였으며, 중국과 대만에서 각각 수집한 C. maxima와 L. giganteus는 중국명이 동일하고 배양적 특성 결과 동일종으로 판단되었다. 수집된 흰깔대기버섯 균주의 균사생장은 한천배지에서는 큰 차이가 없었으나 액체배양에서는 YPMG에서 가장 좋았다. 또한 균사생장 최적온도는 25℃, 자실체 유도 최적온도는 30℃로 밝혀졌으며 균사생장 최적 pH는 6.0-8.0으로 밝혀졌다. 흰깔대기버섯을 인공재배하기 위하여 농산부산물 및 임업부산물을 이용하여 배양적 특성 및 인공재배를 실시하였으며, 볏짚, 미루나무톱밥, 콘코브, 미송배지에서 균사 생장이 양호하여 이를 재배용 배지 재료로 선발하였다. 공시균주를 접종한 7 종류의 배지에서 균사생장 속도는 폐면, 혼합배지2, 미루나무톱밥 순으로 균사 생장이 양호하였다. 흰깔대기버섯을 인공재배하기에 가장 적합한 배지는 혼합배지2(배합비 : 활엽수톱밥 55%, 면실피펠렛 5%, 면실박 10%, 비트펄프 15%, 팽연왕겨 15%)이며, 배양에서부터 수확까지 30여일 소요되어 느타리버섯보다 빠른 수확이 가능하였다. CMA-003 균주는 공시된 모든 배지에서 자실체 유도처리 8~10일 후 자실체 원기 형성되었고, CMA-003 균주는 다발성 발이를, 그 외의 균주들은 개체발이를 보이며, 원기 발생 후 7~17일 생육으로 자실체 수확 할 수 있었다. 다발성인 CMA-003 균주의 대길이, 갓직경과 개체중량은 개체 발이하는 다른 균주들보다 작았지만, 수확률이 높아 농가 재배용 균주를 선발하였다. 흰깔대기버섯 자실체 유도 및 생육에 적합한 온도는 25~30℃, 백색형광등 8시간/1일 조사, 상대습도 : 90~95%, 재배실 CO2 농도 1,500 ppm 이하로 유지하여, 국내의 여름철 고온기에 냉방시설이 없는 간이재배사, 영세 느타리버섯 재배 농가에서 재배 가능하였다.

상아질과 Gutta-Percha에 대한 근관충전용 Sealer의 결합강도의 측정 (MEASUREMENT OF ADHESION OF ROOT CANAL SEALER TO DENTINE AND GUTTA-PERCHA)

  • 허미자;유미경;이세준;이광원
    • Restorative Dentistry and Endodontics
    • /
    • 제28권1호
    • /
    • pp.89-99
    • /
    • 2003
  • The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

THI에 의한 일부 치과기공사의 건강상태에 관한 조사 연구 (A Study on the Health Status of Dental Technicians by Todai Health Index(THI))

  • 권순석;문희정;신명숙;김윤신
    • 치위생과학회지
    • /
    • 제9권2호
    • /
    • pp.169-179
    • /
    • 2009
  • 본 연구는 국민의 구강보건 증진에 있어 치과보철물 제작 업무를 담당하고 있는 치과기공사를 대상으로 THI 건강조사표를 통해 육체적, 정신적 건강상태를 분석하여 치과기공사들이 당면하고 있는 건강 문제를 파악하고, 건강관리 프로그램 개발을 위한 기초자료를 제공을 목적으로 2009년 1윌 15일부터 3월 31일까지 전국 치과기공소(실)에서 근무하고 있는 895명의 치과기공사를 대상으로 하였으며, 그 결과는 다음과 같다. 1. 치과기공사의 심신 자각증상에 따른 평균 척도득점은 신체적 호소가 21.10으로 정신적 호소 18.49보다 높았고, 신체적 호소 항목에서는 다호소(자각) 증상(I)이 38.44로 가장 높고 구강과 항문(D)이 15.30으로 가장 낮았으며, 정신적 호소 항목에서는 정서불안정(J)이 25.92로 가장 높고 공격성(F)이 14.02로 가장 낮게 나타났다. 10개 항목으로 표준화 한 결과에서는 신경질(E)이 20.63으로 가장 높은 호소점수를 보였다. 2. 남, 여 모두 신체적 호소가 정신적 호소보다 높고, 여성이 남성보다 신체적 호소와 정신적 호소가 모두 높았으며, 남성과 여성 모두 다호소(I)항목의 평균 척도득점이 각각 37.33과 40.46으로 가장 높게 나타났다. 12개 항목의 심신 자각증상 증 다호소(I), 눈과 피부(B), 충동성(H), 허구성(L), 정서불안정(J), 우울성(K), 공격성(F), 생활불규칙성(G)에서 유의한 차이(p<0.001)로 보였고, 그 다음으로 소화기(C)(p < 0.01)에서 통계적으로 유의한 차이를 보였다. 3. 연구대상자들을 연령별, 결혼 상태별, 직위별, 근무환경별, 휴식 수별로 집단을 구분 한 결과 공통적으로 신체적 호소가 정신적 호소보다 높고, 12개 항목의 심신 자각증상 중 다호소(I)항목의 평균 척도득점이 가장 높았으며, 정서적불안정(J)항목이 두 번째로 높았다. 4. 신체적 정신적 항목의 평균 척도득점(호소점수)의 경우 연령에서는 20대 집단(각각 21.49. 18.70)이, 직위에서는 기타 집단(각각 22.00, 18.78)이, 근무환경에서는 '매우 불량하다'. 집단(각각 23.21, 19.33)이, 휴식 수에서는 '없다' 집단(각각 21.68, 18.81)에서 가장 높게 나타났으며, 결혼 상태에서는 기타 집단이 신체적 호소(21.55)에서, 미혼 집단은 정신적 호소(18.71)에서 가장 높게 나타났다.

  • PDF