• Title/Summary/Keyword: $pCO_2$

Search Result 7,743, Processing Time 0.037 seconds

Variation of Indoor Air Temperature by using Hot Water Piping in Greenhouse (온수배관에 의한 온실 내부의 온도변화)

  • Yoon, Yong-Cheol;Shin, Yik-Soo;Bae, Seoung-Beom;Kim, Hyeon-Tae;Choi, Jin-Sik;Suh, Won-Myung
    • Journal of agriculture & life science
    • /
    • v.46 no.2
    • /
    • pp.179-190
    • /
    • 2012
  • This study was performed to obtain a heat saving effect and enhance the efficiency of a greenhouse by using a hot water piping in order to minimize the operating costs of a greenhouse as oil prices continue to rise. This method also reduces the likelihood of accidents caused by snowdrifts in regions with heavy snowfall. In general, the experimental plot was $2.0{\sim}6.0^{\circ}C$ higher than the control plot. When the skylight felt was opened, the minimum temperature was in the range of $3.0{\sim}12.0^{\circ}C$. Therefore, we judged that damage caused by snowdrifts may be prevented partly by active heating. The temperature difference inside of the greenhouse by height was insignificant. The maximum heating load of the greenhouse according to crop was respectively about $37,000kcal{\cdot}h^{-1}$ and $41,700kcal{\cdot}h^{-1}$. During the experiment, the heat value of each designed temperature in the range of the minimum ambient temperature $-11.9{\sim}4.0^{\circ}C$ was about 95,000~322,000 kcal and it was in the range of $6,050{\sim}20,900kcal{\cdot}h^{-1}$. If it is compared with the maximum heating load, it can be shown that about 15~56% of the heating energy can be supplied. The total heat value and the amount of power consumption were 2,629,025 kcal and 677.3 kWh respectively during the experiment. If it is heated with diesel, a fossil fuel, the consumption during the experiment was 291 L and the cost was 331,700won. Total cost of using electric power was about 24,400 won and it is shown that it is about 7.5% of the cost of diesel consumption. Also, if the total amount of power consumption is converted into energy, it is approximately 582,200 kcal and the energy was just about 22% of the total heat value.

Inorganic and Organic Geochemical Characteristics of Devonian Bitumen Carbonate in Alberta, Canada (캐나다 데본기 비투멘 탄산염암의 무기 및 유기 지화학적 특성 연구)

  • Choi, Ji-young;Kim, Ji-Hoon;Kil, Yong-Woo;Lee, Sung-Dong;Park, Myong-Ho
    • Economic and Environmental Geology
    • /
    • v.44 no.1
    • /
    • pp.21-35
    • /
    • 2011
  • Inorganic and organic geochemical characteristics of Devonian bitumen carbonates in Alberta were studied using two drilling cores, Saleski 03-34-88-20w4 and Saleski 08-01-88-20w4, taken from the Core Research Center of Canada. The results of elements analyses showed high Total Inorganic Carbon, low Total Nitrogen and Total Sulfur, and Rock-Eval pyrolysis showed double $CO_2$ peaks in the oxidation part. These mean that the Devonian bitumen carbonates are mainly composed of dolomite formed by diagenesis, and its crystal texture is dominantly subhedral to anhedral but often euhedral. Bitumen contents were 3.6~19.0% in Saleski 3-34-88-20w4 and 5.0~16.4% in Saleski 08-01-88-20w4, respectively. As samples color become dark, bitumen and Total Organic Carbon contents are generally increasing in two cores. The results of biomarker analyses showed that the contents of resins and asphaltenes were 5~28% higher than those of saturated hydrocarbon, interring that the bitumen has been heavily biodegradated. According to the results of carbon isotope analyses in each component of bitumen, asphaltenes had highest values and the others had constant values. However, their values were varied in the range of normal crude oil (-18~-30‰).

Silicon thin films and solar cells by HWCVD (열선 화학 기상 증착법에 의한 실리콘 박막 및 태양전지 특성)

  • Kim Sang-Kyun;Lee Jeong Chul;Jeon Sang Won;Lim Chung Hyun;Ahn Sae Jin;Yun Jae Ho;Kim Seok Ki;Song Jinsoo;Park S-J;Yoon Kyung Hoon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2005.06a
    • /
    • pp.205-208
    • /
    • 2005
  • 최근 열선 화학 기상 증착법(HWCVD)은 낮은 온도에서 TFT용 Poly Si 중착을 할 수 있다는 점과 실리콘 박막을 빠른 속도로 증착할 수 있다는 점에서 각광을 받고 있다. 본 연구에서는 HWCVD를 이용하여 태양전지를 제조하고 그 특성을 평가하였다. 조건에 따른 실리콘 박막의 특성 변화를 알기 위해 corning glass 및 실리콘 wafer에 다양한 조건에서 단위 박막(intrinsic layer)을 증착하였고 이 결과를 바탕으로 p/i/n 구조의 태양전지를 제조하였다. Ta 열선 온도는 1700-2000도였고 가스 원료인 $SiH_4$와 수소의 비율을 조절하면서 그 영향을 관찰하였다. 태양전지의 경우 p충과 n충은 PECVD로 증착하였으며 단위박막 및 태양전지 i충 증착시 기판과 열선간의 거리는 7cm, 기판 온도는 $200^{\circ}C$$250^{\circ}C$로 고정하였고 작업압력은 30mTorr였다. 단위 박막 특성 평가를 위해 암/광 전도도, SEM, Raman Scattering, FT-IR등을 사용하였으며 태양전지 특성 평가를 위해 I-V 및 Spectral response를 측정하였다. 열선 온도가 증가함에 따라 증착속도 및 결정화 분율은 증가하였다. 특히 비정질에서 결정질로 전이되는 구간은 매우 좁았으며 여러 분석 방법에서 일치되는 결과를 보였다. $SiH_4$ 유량이 늘어날수록 비정질이 결정질로 바뀌는 열선 온도가 증가하였으며 기판 온도가 낮을 경우 또한 결정으로 바뀌는 열선 온도가 증가하였다. 태양전지의 경우 열선 온도가 증가함에 따라 $V_{oc}$ 및 W가 낮아졌으며 $J_{sc}$, 는 증가하는 경향을 보였으며 결정질 비율이 증가하는 것을 관찰할 수 있었다. 이러한 경향은 quantum efficiency 결과에서도 확인할 수 있었다.용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.TEX>$88\%$)였다.(P=0.063). 결론: 본 연구에서는 MTHFR C/T & T/T 유전자 다형성이 위암의 발생과 그 위치에 대해 관련이 있는 것으로 여겨지고, 흡연력, 음주력과는 관련이 없는 것으로 여겨진다.험이 커지는 경향을 보였으나, 나이 및 병기, 종양의 크기, MD-BED $Gy_{10}$ 등의 예후 인자를 보정한 다변

  • PDF

Biomechanical Comparative Analysis of Two Goal-kick Motion in Soccer (두 가지 축구 골킥 동작의 운동역학적 비교 분석)

  • Jin, Young-Wan;Shin, Je-Min
    • Korean Journal of Applied Biomechanics
    • /
    • v.15 no.1
    • /
    • pp.29-44
    • /
    • 2005
  • The purpose of this study is to reveal the effects of two different kicks, the drop kick and the punt kick, into the kicking motion, through the kinetic comparative analysis of the kicking motion, which is conducted when one kicks a soccer goal. To grasp kinetic changing factors, which is performed by individual's each body segment, I connected kicking motions, which were analyzed by a two dimension co-ordination, into the personal computer to concrete the digits of it and smoothed by 10Hz. Using the smoothed data, I found a needed kinematical data by inputting an analytical program into the computer. The result of comparative analysis of two kicking motions can be summarized as below. 1. There was not a big difference between the time of the loading phase and the time of the swing phase, which can affect the exact impact and the angle of balls aviation direction. 2. The two kicks were not affected the timing and the velocity of the kicking leg's segment. 3. In the goal kick motion, the maximum velocity timing of the kicking leg's lower segment showed the following orders: the thigh(-0.06sec), the lower leg(-0.05sec), the foot(-0.018sec) in the drop kick, and the thigh(-0.06sec), the lower leg(-0.05sec), the foot(-0.015sec) in the punt kick. It showed that whipping motion increases the velocity of the foot at the time of impact. 4. At the time of impact, there was not a significant difference in the supporting leg's knee and ankle. When one does the punt kick, the subject spreads out his hip joint more at the time of impact. 5. When the impact performed, kicking leg's every segment was similar. Because the height of the ball is higher in the punt kick than in the drop kick, the subject has to stretch the knees more when he kicks a ball, so there is a significant affect on the angle and the distance of the ball's flying. 6. When one performs the drop kick, the stride is 0.02m shorter than the punt kick, and the ratio of height of the drop kick is 0.05 smaller than the punt kick. This difference greatly affects the center of the ball, the supporting leg's location, and the location of the center of gravity with the center of the ball at the time of impact. 7. Right before the moment of the impact, the center of gravity was located from the center of the ball, the height of the drop kick was 0.67m ratio of height was 0.37, and the height of the punt kick was 0.65m ratio of height was 0.36. The drop kick was located more to the back 0.21m ratio of height was 0.12, the punt kick was located more to the back 0.28m ratio of height was 0.16. 8. There was not a significant difference in the absolute angle of incidence and the maximum distance, but the absolute velocity of incidence showed a significant difference. This difference is caused from that whether players have the time to perform of not; the drop kick is used when the players have time to perform, and punt kick is used when the players launch a shifting attack. 9. The surface reaction force of the supporting leg had some relation with the approaching angle. Vertical reaction force (Fz) showed some differences in the two movements(p<0.05). The maximum force of the right and left surface reaction force (Fx) didn't have much differences (p<0.05), but it showed the tendency that the maximum force occurs before the peak force of the front and back surface (Fy) occurs.

Characterization of Antibacterial Compounds from Bacillus polyfermenticus CJ6 and Its Growth Inhibition Effect on Food-Borne Pathogens (Bacillus polyfermenticus CJ6가 생산하는 항세균 물질의 특성 및 병원성 식중독 미생물의 성장 억제 효과)

  • Jung, Ji-Hye;Chang, Hae-Choon
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.40 no.6
    • /
    • pp.903-911
    • /
    • 2011
  • In this study, Bacillus polyfermenticus CJ6 harboring antibacterial activity was isolated from meju. The antibacterial activity of Bacillus polyfermenticus CJ6 was stable in the pH range of 3.0~9.0, but it disappeared after culture at $70^{\circ}C$ for 24 hr. Antibacterial activity was inactivated by proteinase K, protease, and ${\alpha}$-chymotrypsin, indicating its proteinaceous nature. The growth inhibitory effects of B. polyfermenticus CJ6 culture on food-borne pathogens such as Staphylococcus aureus, Salmonella Typhi, Listeria monocytogenes, and Escherichia coli O157:H7 were examined in this study. Approximately 6~6.2 log CFU/mL of each pathogen was co-cultured with B. polyfermenticus CJ6 in a 50 mL culture volume for 24 hr. Growth of S. aureus and L. monocytogenes was completely inhibited after 3 hr of incubation. Growth of S. Typhi and E. coli O157:H7 was also completely inhibited after 6 hr of incubation. The antibacterial compounds from B. polyfermenticus CJ6 were purified by solid phase extraction (C18 Sep-pak cartridge), recycling preparative HPLC, and analytical HPLC. Ultra-high performance liquid chromatography and electrospray ionization tandem mass spectrometry analysis were used to identify the purified antibacterial compounds, which were confirmed to be five peptides (757.4153 Da, 750.3444 Da, 1024.5282 Da, 1123.6083 Da, and 1617.8170 Da).

INFLUENCE OF A SODIUM HYPOCHLORITE GEL ON MICROLEAKAGE OF COMPOSITE RESIN RESTORATIONS (차아염소산 나트륨의 사용이 복합레진 수복물의 미세누출에 미치는 영향)

  • Yang, Kye-Sik;Kim, Dae-Eop;Lee, Kwang-Hee;Jeong, Young-Nam
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.30 no.1
    • /
    • pp.54-60
    • /
    • 2003
  • This study evaluated the influence of chemomechanical caries removal agent $Carisolv^{TM}$(MediTeam, Sweden) for composite resin adhesion to sound human permanent and primary dentin. The buccal/labial surfaces of 80 permanent molars and 80 primary incisors were used. Four types of adhesives and one composite resin were used; AQ Bond(Sun Medical, Japan), Clearfil SE Bond(Kuraray, Japan), Single Bond(3M, USA), Scotchbond Multi-Purpose(3M, USA) and Z100(3M, USA). One drop of $Carisolv^{TM}$(MediTeam, Sweden) was pretreated on the dentin for 0 second(control) and 60 seconds. The specimens were thermocycled for 1,000 times in baths kept 5 degrees C and 55 degrees C with a 30 seconds dwell time. Shear bond strengths were tested and the data was statistically analyzed using one-way ANOVA with subsequent post hoc Scheffe test at p<0.05. $Carisolv^{TM}$ treatment significantly decreased the shear bond strength. Shear bond strength of permanent dentin was significantly higher than that of primary dentin. Clearfil SE Bond treatment groups showed the highest shear bond strength and AQ Bond treatment groups showed the lowest shear bond strength.

  • PDF

Effect of Feeding By-product of Pleurotus eryngii in Pigs on Pork Quality (새송이 버섯파치 발효액의 급이가 돈육의 품질에 미치는 영향)

  • Lee, Soo-Jung;Kang, Min-Jung;Chung, Mi-Ja;Lee, Hyun-Uk;Seo, Jong-Kwon;Sung, Nak-Ju;Shin, Jung-Hye
    • Journal of Life Science
    • /
    • v.18 no.11
    • /
    • pp.1521-1531
    • /
    • 2008
  • After pigs was fed by commercial diets supplemented with various concentrations (0, 0.5, 1, and 1.5%) of the fermented mushroom by-product of Pleurotus eryngii, the meat qualities and the serum lipid compositions of the individual pig groups were investigated. The levels of total lipid, total cholesterol, and triglyceride in the serum were significantly lower when the pigs were fed with the diet supplemented with 1.5% fermented mushroom by-product than those of the control pigs. HDL-, LDL-, and VLDL-cholesterol contents in the serum exhibited no significant difference between the pig group fed by the diet containing the fermented mushroom by-product and the control group. In comparison to the control group, the pig group fed by the diet supplemented with 1.5% fermented mushroom by-product showed significantly lower level of AI, CRF, GOT, and LDH values in the serum, whereas the difference in the level of antioxidant activity of the serum was not significant. Sensory evaluation regarding color, off-flavor, tenderness, juiciness, and overall acceptability also showed that the pork from the pig group fed by the diet supplemented with the fermented mushroom by-product ($0.5{\sim}1.5%$) was better than that from the control group. Although enhancement in the lghtness ($a^*$) value of the pork was significant in 20 days of storage at $4^{\circ}C$, the redness ($L^*$) value was not significantly differential during the storage periods regardless of the supplementation of the fermented mushroom by-product into the diet. The cooking loss of the pork from the pig group fed by the diet supplemented with the fermented mushroom by-product (1% and 1.5%) decreased in the storage 10 days, but it increased in the storage 20 days. After storage for 20 days at $4^{\circ}C$, shear force of the pork obtained from the pigs fed by the diet supplemented with $1%{\sim}1.5%$ fermented mushroom by-product appeared to become significantly lower than that of the control. There were, however, no significant changes between two groups in the level of moisture content, crude lipid, and pH during the storage period. Although the TBARS content was enhanced in all groups during the storage period, the enhancement appeared to be more significant in the pork from the pig group fed by the diet containing the fermented mushroom by-product in comparison to the control. On the other hand, the ratio of UFA/SFA for the pork obtained from the individual pig groups showed no considerable diet-associated alterations during the storage period.

Polymorphisms in Epigenetic and Meat Quality Related Genes in Fourteen Cattle Breeds and Association with Beef Quality and Carcass Traits

  • Liu, Xuan;Usman, Tahir;Wang, Yachun;Wang, Zezhao;Xu, Xianzhou;Wu, Meng;Zhang, Yi;Zhang, Xu;Li, Qiang;Liu, Lin;Shi, Wanhai;Qin, Chunhua;Geng, Fanjun;Wang, Congyong;Tan, Rui;Huang, Xixia;Liu, Airong;Wu, Hongjun;Tan, Shixin;Yu, Ying
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.28 no.4
    • /
    • pp.467-475
    • /
    • 2015
  • Improvement for carcass traits related to beef quality is the key concern in beef production. Recent reports found that epigenetics mediates the interaction of individuals with environment and nutrition. The present study was designed to analyze the genetic effect of single nucleotide polymorphisms (SNPs) in seven epigenetic-related genes (DNMT1, DNMT3a, DNMT3b, DNMT3L, Ago1, Ago2, and HDAC5) and two meat quality candidate genes (CAPN1 and PRKAG3) on fourteen carcass traits related to beef quality in a Snow Dragon beef population, and also to identify SNPs in a total of fourteen cattle populations. Sixteen SNPs were identified and genotyped in 383 individuals sampled from the 14 cattle breeds, which included 147 samples from the Snow Dragon beef population. Data analysis showed significant association of 8 SNPs within 4 genes related to carcass and/or meat quality traits in the beef populations. SNP1 (13154420A>G) in exon 17 of DNMT1 was significantly associated with rib-eye width and lean meat color score (p<0.05). A novel SNP (SNP4, 76198537A>G) of DNMT3a was significantly associated with six beef quality traits. Those individuals with the wild-type genotype AA of DNMT3a showed an increase in carcass weight, chilled carcass weight, flank thicknesses, chuck short rib thickness, chuck short rib score and in chuck flap weight in contrast to the GG genotype. Five out of six SNPs in DNMT3b gene were significantly associated with three beef quality traits. SNP15 (45219258C>T) in CAPN1 was significantly associated with chuck short rib thickness and lean meat color score (p<0.05). The significant effect of SNP15 on lean meat color score individually and in combination with each of other 14 SNPs qualify this SNP to be used as potential marker for improving the trait. In addition, the frequencies of most wild-type alleles were higher than those of the mutant alleles in the native and foreign cattle breeds. Seven SNPs were identified in the epigenetic-related genes. The SNP15 in CAPN1 could be used as a powerful genetic marker in selection programs for beef quality improvement in the Snow Dragon Beef population.

Effect of Various Forms of Floor System on Performance of Meat-type Duck and Environments of Duck House (오리사 바닥 형태가 육용오리의 생산성 및 사육환경에 미치는 영향)

  • Bang, Han-Tae;Kim, Dong-Woon;Hwangbo, Jong;Na, Jae-Cheon;Kang, Hwan-Ku;Kim, Min-Ji;Mushtaq, M.M.H.;Parvin, R.;Choi, Hee-Chul;Lee, Sang-Bae;Kang, Min;Kim, Ji-Hyuk
    • Korean Journal of Poultry Science
    • /
    • v.40 no.3
    • /
    • pp.253-262
    • /
    • 2013
  • This experiment was conducted to investigate the effects of floor type and heating system on performance, housing environment and health status of ducks reared in three types of duck house (OD : Open floor house-Direct heating system, OF : Open floor house-Floor heating system and LD : Loft type house-Direct heating system). In OF treatment, PVC pipes were installed for heating under concrete floor and covered with litter. In LD treatment, plastic mesh was installed 50 cm above the floor so that duck's droppings can pass through it. Each treatment had four replicates of 25 birds (Cherry Valley duck breed) per pen. There were no significant differences in weight gain and feed intake of ducks for 6 weeks among all treatments. However, feed conversion ratio in LD was significantly higher (p<0.05) than that in OF. No differences were found in carcass charac- teristics, with the exception of abdominal fat weight where OF were higher than the others. Concentrations of $CO_2$ and $NH_3$ gas in OD were higher than those of OF and LD at 3, 4 and 5 weeks. Moisture content in litter of OF was lower than that of OD. In contrast, the amount of dust in the air was higher in OF than in OD. The amount of fuel used for 6 weeks in LD was lower about 21% than that in OD. Some of unusual symptoms were observed in open floor house and loft type house, such as lying, spraddle legged, twisted ankle and legs, wounded sole, or etc. No components of leukocyte and erythrocyte of blood were significantly different among all treatments. The results of this experiment showed that OF and LD systems had no positive effects on performance of meat type commercial duck. However, there were some positive effects of certain house type for the improvement of environmental condition in duck house for hygienic production. In the future, more research on the effect of various facilities and systems for duck house is needed.

Quality characteristics of low salted garlic Doenjang during fermentation (저염 마늘된장의 숙성기간에 따른 품질특성)

  • Cho, Kye-Man;Kang, Jae-Ran;Kim, Gyeong-Min;Kang, Min-Jung;Hwang, Chung-Eun;Jeong, Young-Shim;Kim, Jeong-Hwan;Lee, Chang-Kwon;Shin, Jung-Hye
    • Food Science and Preservation
    • /
    • v.21 no.5
    • /
    • pp.627-635
    • /
    • 2014
  • We investigated the changes in the quality characteristics of Doenjang with low salt contents (6, 8, 10, and 12%) and 10% garlic. The Doenjang was analyzed at an interval of a week during its fermentation for six weeks, at room temperature. Its L color gradually decreased, but its a and b colors did not change significantly. Its salinity increased by about 1% after six weeks. In contrast, immediately after its preparation, its pH was gradually decreased and its acidity was increased for the fermentation. The reducing sugar was significantly increased from 1.34~1.88 g/100 g immediately after its preparation to 7.25~9.13 g/100 g after six weeks, which was higher as the salt concentration decreased. The amino-type nitrogen doubled from 100~130 mg% at 0 week to 210~290 mg% at six weeks, which were lower with the higher salt concentrations. The growth curve of the Bacillus fermentation strains of Doenjang increased to two weeks but gradually decreased since, and the growth of the Bacillus was favorable for up to two weeks in the Doenjang with 10% and 12% salt added. Otherwise, the yeast was reduced rapidly during the early fermentation of the Doenjang, and slightly changed after three weeks of fermentation. The results of this study showed that the reducing sugar and amino-type nitrogen contents of the low-salt garlic Doenjang were higher with the lower salt dose, and the physicochemical quality of the 6%-salt Doenjang was not significantly affected. Thus, we suggest that low-salt Doenjang can be manufactured with the addition of 6% salt and 10% garlic.