• Journal of the Korean earth science society
• /
• v.24 no.8
• /
• pp.657-667
• /
• 2003

Deep-drilled core sampling and high-resolution seismic survey were carried out to identify a Holocene-late Pleistocene boundary in Gyeonggi Bay, western coast of Korea. Analysis of core sections revealed the existence of an oxidized and semi-consolidated sediment layer, Iying immediately below a Holocene horizon (Unit I) and being developed at the top of a late Pleistocene deposit (Unit II). The oxidized sedimentary layer (uppermost part of Unit II) is characterized by semi-consolidated, yellowish sediments showing signs of desiccation and alteration such as high N value, low water content, periglacial cryogenic structure, depletion of smectite, and high geochemical weathering index (Ba/Sr ratio). This feature, together with radiocarbon ages, suggests that the layer has formed as a result of prolonged subaerial exposure of Unit II sediments during the late Wisconsin sea-level lowstand, producing a regional unconformity. Such unconformitic-bounding surface corresponds to a prominent near-surface reflector (R), which is observed in seismic profiles obtained across the drilled-core sections in the study area. Consequently, the buried oxidized-sedimentary layer associated with the seismic reflector possibly plays a key horizon for the understanding of late Quaternary environmental changes as well as evidence of the emergence of the Yellow Sea shelf during the late Wisconsin sea-level lowstand.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.35-35
• /
• 2009

Capacitorless one transistor dynamic random access memory (1T-DRAM) cells were fabricated on the fully depleted strained-silicon-on-insulator (FD sSOI) and the effects of silicon back interface state on buried oxide (BOX) layer on the memory properties were evaluated. As a result, the fabricated 1T-DRAM cells showed superior electrical characteristics and a large sensing current margin (${\Delta}I_s$) between "1" state and "0" state. The back interface of SOI based capacitorless 1T-DRAM memory cell plays an important role on the memory performance. As the back interface properties were degraded by increase rapid thermal annealing (RTA) process, the performance of 1T-DRAM was also degraded. On the other hand, the properties of back interface and the performance of 1T-DRAM were considerably improved by post RTA annealing process at $450^{\circ}C$ for 30 min in a 2% $H_2/N_2$ ambient.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.821-829
• /
• 1991

In this paper, a BICMOS technology that has CMOS devices for digital application and bipolar devices for high voltage (80V) analog applications is presented. Basic concept to design BICMOS device is simple process technology without making too many performance trade-offs. The base line process is poly gate p-well CMOS process and three additional masking steps are added to improve bipolar characteristics. The key ingredients of bipolar integration are n+ buried layer process, up/down isolation process and p-well base process. The bipolar base region is formed simultaneously with the region of CMOS p-well area to reduce mask and heat cycle steps. As a result, hFE value of NPN bipolar transistor is 100-150(Ic=1mA). Collector resistance value is 138 ohm in case of bent type collector structure. Breakdown voltage of BVebo, BVcbo and BVceo are 21V, 115V and78V respectively. Threshold voltage is ${\pm}$1.0V for NMOS and PMOS transistor. Breakdown voltage of NMOS and PMOS transistor is obtained 22V and 19V respectively. 41 stage CMOS ring oscillator has 0.8ns delay time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1890-1896
• /
• 2008

In this paper, the Si vertical Hall devices ale fabricated by using standard bipolar process and investigated in terms of the opeating and noise properties. The sensitivity of device with P+ isolation dam(type B) has been increased up to about 1.2 times compared to that device without the dam also noise has been increased. With the condition of f=I[KHz], band-width 1[Hz], the resolution of magnetic-field detection were about $0.97[{\mu}T]$/ type B and $1.25[{\mu}T]$/ type A, respectively, thus we must consider correlation the low noise or good resolution and high sensitivity in the situation for device geometry design or even for the materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.219-227
• /
• 1993

Broadcast-seeded rice in submerged paddy frequently lodge in the field. In general, the causes of lodging in rice cultivation differ with different cultural methods. This study was conducted to investigate the causes of lodging in broadcast-seeded rice (BSR) and hand-transplanted rice (HTR) under four nitrogen (N) levels. Lodging in BSR was mainly a root lodging due to shallow root distribution, while that in HTR showed a bending type owing to deep rooting system. At the upper soil layer (0-5cm from the surface of ground) the root distribution of BSR (65.2%) was much larger than that of HTR (51.6%), whereas at the 5-10cm soil layer the root distribution of BSR (18.5%) was much smaller than that of HTR (28.0%). The depth of buried culm base was much shallower in BSR (1.2cm) than in HTR (4.0cm). The plant height, fresh weight, lodging index, culm diameter and thickness in HTR were much greater than those in BSR, and the breaking strength of lower internode was similar in the two cultivation methods indicating that HTR would have more lodging causes than BSR. In spite of . the more advantages to lodging resistance in BSR it severely lodged in the field. The main lodging-inducing factors of BSR were the shallow root distribution and shallow depth of buried culm base. Besides these, the higher ratio of gravity center of culm was an important factor. This result suggested that for the fundamental prevention of lodging in BSR, an ideotype of rice plant with ' a deep-rooted behavior ' should be developed.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.12
• /
• pp.67-78
• /
• 2022

In this study, the measurement results of the coastal deep soft ground buried in the upper part of the dredged clay were analyzed and compared with the current specification standards. Based on the results, a suitable proposal was suggested for the selection, installation, data arrangement, and analysis of each instrument used in the deep soft ground improvement construction. The pore water pressure meter has a range of 1.5 times or more of the expected measurement range, considering the field conditions of the soft ground. The groundwater level meter installed in the horizontal drainage layer checks the change in the groundwater level during the embanking as well as the performance of the catchment well and the horizontal drainage layer. Therefore, it is important to manage so that the groundwater level exists inside the horizontal drainage layer during embanking. It is enough to install the inclinometer in the gravel layer below the soft ground or weathered rock with an N value of 40 or more for the deep soft ground. It seems desirable to install a screw type for differential settlement meter. However, the screw type should not settle due to its own weight. Considering that it is a dredged landfill where subsidence occurs significantly, it is sufficient to manage the tolerance of leveling at about 10 mm (L is the one-way distance (km)).

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.340-350
• /
• 2015

This experiment was carried out to find out the mitigation of greenhouse gases (GHGs) emission and changes of soil carbon contents in the cropland. In order to minimize the soil disturbance, this study was conducted without crop cultivation at the pots treated with different biomass. Different biomass was buried in the soil for 12 months. Decomposition rates of expander rice hull, pig manure compost and carbonized rice hull were 18%, 11~11.5% and 0.5~1.2%, respectively. It was appeared that carbonized rice hull was slightly decomposed. No difference was shown between chemical fertilizer treatment plot and non-application plot. It was appeared that soil carbon content in the non chemical fertilizer application plot was high when compared to its chemical fertilizer. Its content at soil depth of 20 cm more decreased than the upper layer of soil. Accumulative emission of $CO_2$ with different treatments of biomass was highest of 829.0~876.6 g $CO_2m^{-2}$ in the application plot of PMC (Pig Manure Compost) regardless of chemical fertilizer treatment during 16 months of experiment. However, the emission for expander rice hull treatment plot was lowest of 672.3~808.1 g $CO_2m^{-2}$. For application plot of the carbonized rice hull, it was shown that non chemical fertilizer plot, 304.1 mg $N_2Om^{-2}$, was higher than the chemical fertilizer treatment, 271.6 mg $N_2Om^{-2}$. Greenhouse gas emissions in the PMC treatment were highest of 0.94 ton $CO_2eqha^{-1}yr^{-1}$. However, it was estimated to be the lowest in the expander rice hull treatment.

• Water for future
• /
• v.8 no.2
• /
• pp.30-40
• /
• 1975

Hydrogeological survey and geophysical prospecting have been carried out in Saudi Arabia for the purpose of finding groundwater in the soil and rock at the request of General trading company in Jeddah, Saudi Arabia. The surveyed area is located on $38^{\circ}-39^{\circ}$ 30' in longitude and $26^{\circ}-26^{\circ}$ 30' in latitude. The topography of this area is dominated by northwest southeast mountain range composed mostly of precambrian rocks and basalt of tertiary period. Geology is mainly composed of greenstone, granite, andesite, diorite rhyolite of pre-cambrian era and sandstone of cambrian period which are underlained by basalt and andesite of tertiary period and alluvium of quaternary unconformably. The instruments used in this investigation are TR-18B2 radioactivity unit which isjapanese patented and A.C. Terrameter, a resistivity meter manufactured by ABEM of Stockholm, Sweden. Radioactivity method has been conducted along the Alula-Khaybar road, totally 164Km by the car-borne. As a result of the above survey 16 places have been selected and these anomalies show 1.2N-1.6N compared to background of each area in intensity with width of 10-50m. Resistivity vertical profiling which made use of Schlumberger configuration method has been made over selected areas by radioactivity method to provide hydrogeological information for a water resources survey. The result of resistivity shows that good aquifers are located in the western part of surveyed area where sedimentary rock is distributed. The strata showing 10-50, ${\Omega}-m$ in resistivity are thought to be waterbearing layer. The variations in aquifer resistivity found, are thought to be due to verying clay content, which could be related to aquifer yield. It has proved impossible to detect small salinity variation in the buried aquifer by geophysics. As a result of resistivity prospecting 10 places are recommended to be drilled at the anomalies as shown attached map. yields from the proposed holes have been estimated approximately from $20m^3$ to $200m^3$ per day. Prior to drilling for groundwater, test boring using ${\c}4"$ should be drilled in order to obtain more reliable hydrogeological information for the construction of perfect wells.ells.

• Solar Energy
• /
• v.17 no.4
• /
• pp.3-11
• /
• 1997

Because grain boundaries in polycrystalline silicon act as potential barriers and recombination centers for the photo-generated charge carriers, these defects degrade conversion effiency of solar cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatment, various grid pattern, selective wet etching for grain boundaries, buried contact metallization along grain boundaries, grid on metallic thin film. Pretreatment above $900^{\circ}C$ in $N_2$ atmosphere, gettering by $POCl_3$ and Al treatment for back surface field contributed to obtain a high quality poly-Si. To prevent carrier losses at the grain boundaries, we carried out surface treatment using Schimmel etchant. This etchant delineated grain boundaries of $10{\mu}m$ depth as well as surface texturing effect. A metal AI diffusion into grain boundaries on rear side reduced back surface recombination effects at grain boundaries. A combination of fine grid with finger spacing of 0.4mm and buried electrode along grain boundaries improved short circuit current density of solar cell. A ultra-thin Chromium layer of 20nm with transmittance of 80% reduced series resistance. This paper focused on the grain boundary effect for terrestrial applications of solar cells with low cost, large area, and high efficiency.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2016

During the 2004 Niigata-ken Chuetsu, Japan, earthquake, more than 1,450 underground structures, known as sewer manhole, were uplifted up to 1.5m in Nagaoka and Ojiya city. The uplift damage can be a serious matter because they not only hinder the flow of wastewater systems, as a part of lifeline systems, but also disturb traffic flows. For restoration works, an open-cut investigation of damaged wastewater system was conducted by the Nagaoka city government. The results from the investigation compiled valuable data sets for buried pipeline damage due to earthquakes. In the present study, the factors affecting the uplift amount of the underground structure is investigated by using the data sets which include locations of damaged sections and inclination of pipeline before and after the earthquake and the SPT borehole logs in the affected area. Correlation analysis between the underground structure uplift and the geological settings in the affected area revealed that ground water depth and original subsoil, including thickness of clay layer, SPT N-value and fill thickness are the key parameters for the uplift phenomenon.