• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.80-88
• /
• 2003

Object The purpose of this study were to evaluate the microtensile bond strength of resin fiber reinforced post to radicular dentin using resin cement according to various dentin surface treatment and to observe the inter face between post and root dentin under SEM Material and Method A total 16 extracted human single rooted teeth were used. A lingual access was made using a #245 carbide bur in a high-speed handpiece with copious air water spray. The post space was mechanically enlarged using H-file(up to #60) and Gates Glidden bures(#3). This was followed by refining of the canal space using the calbrating drill set provided in ER Dentinpost(GEBR, BRASSELER GmbH&Co. KG). The 16 teeth were randomly distributed into 4 group of 4 teeth. Group 1 teeth had their post space prepared using 10% phosphoric acid as root canal surface treatment agent during 20s. The canal was then rinsed with saline and dried with paper point. Group 2 teeth had their post space prepared using 3% NaOCl as root canal surface treatment agent during 30min. The canal was then rinsed with saline and dried with paper point. Group 3 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. The canal was then rinsed with saline and dried with paper point. Group 4 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. After rinsing with saline, the canal was rinced 10m1 of 3% NaOCl for 30min. After drying with paper point, the post(ER Dentinpost, GEBR, BRASSELER GmbH&Co. KG) was placed in the treated canals using resin cement. Once the canal was filled with resin cement(Super bond C&B sunmedical co. Ltd.), a lentulo was inserted to the depth of the canal to ensure proper coating of the root canal wall. After 24 hours, acrylic resin blocks($10{\cdot}10{\cdot}50mm$) were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strengths for each stick was measured with Microtensile Tester. Failure pattern of the specimen at the interface between post and dentin were observed under SEM. Results 1. Tensile bond strengths(meen{\pm}SD$) ) were expressed with ascending order as follows group 4, $12.52{\pm}6.60$ ; group 1, $7.63{\pm}5.83$ ; group 2, $4.13{\pm}2.31$ ; group 3, $3.31{\pm}1.44$. 2. Tensile bond strengths of Group 4 treated with 17% EDTA +3%NaOCl were significant higher than those of group 1, 2 and 3 (p<0.05). 3. Tensile bond strengths of Group 1 treated with 10% phosphoric acid were significant higher than those of group 2 (p<0.05). Tensile bond strengths of Group 4 treated with 17% EDTA +3% NaOCl was significant higher than those of other groups.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.312-319
• /
• 2009

Statement of problem: Delamination of veneering porcelain from underlying ceramic substructures has been reported for zirconia-ceramic restorations. Colored zirconia cores for esthetics have been reported that their bond strength with veneered porcelain is weaker compared to white zirconia cores. Purpose: This study aimed to investigate the shear bond strength by manufacturing the veneering porcelain on the colored zirconia core, using the layering technique and heat-pressing technique, and to evaluate the clinical stability by comparing the result of this with that of conventional metal ceramic system. Material and methods: A Metal ceramic (MC) system was tested as a control group. The tested systems were Katana zirconia with CZR (ZB) and Katana Zirconia with NobelRondo Press (ZP). Thirty specimens, 10 for each system and control, were fabricated. Specimen disks, 3 mm high and 12 mm diameter, were fabricated with the lost-wax technique (MC) and the CAD-CAM (ZB and ZP). MC and ZB specimens were prepared using opaque and dentin veneering ceramics, veneered, 3 mm high and 2.8 mm in diameter, over the cores. ZP specimens were prepared using heat pressing ingots, 3 mm high and 2.8mm in diameter. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50 mm/min until failure. Mean shear bond strengths (MPa) were analyzed with the One-way ANOVA. After the shear bond test, fracture surfaces were examined by SEM. Results: The mean shear bond strengths (SD) in MPa were MC control 29.14 (2.26); ZB 29.48 (2.30); and ZP 29.51 (2.32). The shear bond strengths of the tested systems were not significantly different (P > .05). All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers. Conclusion: 1. The shear bond strengths of the tested groups were not significantly different from the control group (P >.05). 2. There was no significant different between the layering technique and the heat pressing technique in the veneering methods on the colored zirconia core. 3. All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.29-36
• /
• 1985

In the previous papers (Kim and Park, 1984 a, b), we have reported on alginic acid from Ecklonia cava. The seasonal and portional variation in the composition of uronic acids and their block structures of alginic acid from Sargassum ringgoldianum (collected from Ichon-ri at the coast of Ilgwang-myon, Yangsan-gun, Kyongnam, Korea, in the period of January to December in 1982) are investigated, and their relationship between the chemical composition and some rotated properties is discussed in this study. The results are as follows: 1. One year average contents of alginic acid were $21.4\%$ in the stipe and $19.7\%$ in the frond, one-year average values of M/G ratios were 2.38 in the frond and 1.85 in the stipe. The value of frond was largest in the period of Jauuary to April and smallest in May and October to December. The value of stipe was largest January to April and smallest in May. In general, the proportions of M block in the both of frond and stipe were higher than those of G block. 2. The viscosity of frond alginic acid showed higher values of 31.1 cP in November, and lower (below 7.0 cP) in the stipe alginic acid. Furthermore, the dependence on temperature of frond alginic acid was also larger in November and others were lower. Ion exchange ability of frond alginic acid was highest in July and the exchange amounts were $Pb^{2+}\;5.2,\;Cu^{2+}\;3.1,\;Zn^{2+}\;1.7,\;Co^{2+}\;1.5$ meq/g, Na-Alg., and the ability of stipe alginic acid was highest in May and the amounts were $Pb^{2+}\;4.6,\;Cu^{2+}\;3.3,\;Zn^{2+}\;2.5,\;Co^{2+}\;1.4$ meq/g. Na-Alg.. The affinity with metallic ions appeared higher in order of $Pb^{2+}>Cu^{2+}>Zn^{2+}>Co^{2+}$, and the exchange ability assumed to relate with the block ratio of uronic acid.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.39-46
• /
• 1977

In the analysis of variance between population and between individual trees (families), the fluctuation of values of variances due to sample size, (number of family) was analysed by two different designs, i.e. 2-level nested design with equal sample size and randomized complete block design. The variables were seedling heights and root calipers of 1-0 and 1-1 seedlings of Pinus densiflora S. et Z. The details of three natural stands and their progeny characters were presented in previous reports. 1. In nested design analysis. increase of sample size resulted the decrease of F-values among families in general, however, the F-values among populations showen the increasing tendency. The smaller the sample size, the larger the F-values fluctuation was resulted in general. At the point of beyond sample size 10, however, the fluctuation become to be stabilized. The F-value fluctuation seemed to be more in the case of analysis with random sampling method than with sequentially accumulated sampling method. And also such a tendency was more obvious in smaller sample size than in large one. 2. In R.C.B.D. analysis, the sample size to affirm the family variation was smaller than that for population variations.

• Journal of the Korean earth science society
• /
• v.38 no.1
• /
• pp.64-79
• /
• 2017

We have reported the petrographic properties on the soda straw primarily based on the field measurements and discussed the causes of their traits. 156 soda straws in district B of the Baeg-nyong Cave nominated with the natural monument No. 260 have been investigated to estimate physical, sedimentological and textural characteristics. The soda straws have an average length of 3.05 cm with a standard deviation of 1.7 cm and a mean diameter of 6.0 mm. This result shows that the average diameter of the soda straws measured in this study is thicker than previous reports by 20%. Although the drip rates of cave water from 85.3% of all the soda straws are exceedingly lower than 1 drop per 10 minutes, almost all soda straws have a dripping water. We firstly report growth lamina in the Korean soda straw from 85.3% of all samples, and this textural dominance indicates that the growth lamina are one of the common features of the soda straws at least in the study area. Secondary precipitations inside the soda straw were identified from 68.6%. Notably, the strong inverse correlation between growth lamina and secondary precipitates was represented from 70.5% of all samples. This finding might be explained by the seasonality of cave drip water supplied into the soda straws or the increased opacity caused by secondary precipitates. Based on petrograhic characteristics, the soda straws in the study area can be classified into normal and erratic types. Hopefully our results on the soda straws in Baeg-nyong Cave would provide a basis for the descriptions of soda straws from other caves and paleoclimatic applications.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.311-321
• /
• 2008

In order to improve the insufficient protein content of Jeung-Pyun with respect to sitology, as well as its fermentation process, this study prepared Jeung-Pyun doughs containing 0, 5, 10, 15, and 20 g of milk, respectively, and examined their mechanical and functional characteristics. The internal structure of the Jeung-Pyun was observed by SEM. With regard to color, the L-value increased with increasing amounts of added milk, and the highest value (65.43) occurred in the group containing 20 g of added milk; however, there were no significant differences among groups. The group containing 20 g of added milk also presented the highest a-value, and the samples with added milk had higher b-values than the control. At 8 hours of fermentation, the 10 g- and 15 g-added milk groups had viscosities of 5726.67 and 6600 respectively; viscosity increased with increasing amounts of milk, and the added-milk groups had significantly higher values than the control group. Hardness also increased with increasing amounts of added milk. However, there were no significant differences in resilience and cohesive power among the groups. The groups containing 5 and 10 g of added milk had the lowest cohesion and break values. For appearance, the group without added milk had the whitest color. Pore size decreased and showed less uniformity as the amount of added milk increased. The unique tackju aroma of Jeung-Pyun decreased significantly as the level of added milk increased, and the 20 g addition presented the lowest value. The 10 g-added milk group had the highest level of sweetness, and sourness increased with increasing amounts of added milk. For softness, the control group was estimated as slightly softer than the added-milk groups. The stickiest sample was generally preferred when considering taste, white color, and sweetness. Among the quality characteristics, having greater stickiness, resilience, moisture, and softness was better in terms of chewing. Overall, the size of the Jeung-Pyun containing 10 g of milk was even and well-developed.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.629-635
• /
• 2009

We investigated the prolongation of freshness and quality during storage of muskmelons harvested at different times and treated with 1-MCP. The weight loss rate increased in all samples as the storage period was extended, although the weight loss of 1-MCP-treated samples was lower than that of controls, regardless of the degree of maturation. Additionally, the hardness of 1-MCP-treated samples was higher than that of controls, again independent of maturation stage. Specifically, 1-MCP treatment delayed softening of muskmelons, as 1-MCP- treated samples showed a high hardness value after 22 days of storage, whereas hardness of control samples decreased rapidly after 10 days. The soluble solid level in muskmelons harvested 92 days after planting was $14.3^{\circ}$ Brix, whereas that of fruit harvested after 90 days was $12.7^{\circ}$ Brix. There was no significant difference in the acidity of 1-MCP-treated samples and controls after 7 days of storage, although the acidity of 1-MCP-treated fruit was greater than that of controls after 13 days, regardless of the degree of maturation. The L-values (lightness) of 1-MCP treated samples were higher than those of controls for the first 10 days of storage, but the reverse was true after 13 days of storage. The b-values (yellowness) were high in control fruits during the initial period of storage, but greater in 1-MCP treated samples after 19 days of storage. The respiration rate of 1-MCP treated samples was lower than that of controls, regardless of the degree of maturation. Sensory evaluation revealed that the texture of control fruit decreased as storage time rose, whereas that of 1-MCP-treated samples did not fall until 28 or 34 days of storage (p<0.05). Overall acceptability based on a marketable score of 5 points showed that 1-MCP-treated muskmelons scored higher than controls, and remained fresher on storage.

• Korean Journal of Clinical Laboratory Science
• /
• v.38 no.3
• /
• pp.196-202
• /
• 2006

Treatment of hepatitis B virus (HBV) with lamivudine is effective in suppressing virus replication and results in reduced inflammatory activity. However the most troublesome problem of lamivudine treatment is the emergence of lamivudine-resistant strains with amino acid substitution in the YMDD motif of DNA polymerase gene during the treatment. The aim of this study was to determine the mutation of YMDD motif (codon 552) and codon 528 in chronic HBV patients with lamivudine therapy using PCR-direct sequencing and to investigate the relationship between lamivudine mediated HBV mutation and HBeAg. HBV DNA was extracted from serum samples of HBV patients and amplified by nested PCR with two sets of primer pairs selected in HBV DNA polymerase gene. Amplified PCR product was analyzed by 2% agarose gel electrophoresis and direct sequencing. HBV mutation was detected in 124 out of 207 samples (60%). Single mutation was 50.8% for M552I, 43.5% for M552V, 5.7% for M552I/V and the L528M mutation was 67.0%. Double mutation was 43.6% for M552V/L528M, 33.1% for M552I/L528(wild type), 17.7% for M552I/L528M and 5.6% for M552I/V/L528M. Serine mutation at YMDD motif (M552S) was not found and the L528M mutation frequently accompanied M552V type. In this study, the typical difference of frequencies for HBV mutation depending on HBeAg was not found. Moreover, the PCR-direct sequencing method used in this study might be a powerful tool for the mutation study in clinical reference laboratories with high volume.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.321-331
• /
• 2000

Multiple 15-hue tests were designed and implemented on a PC in the study so as to quickly and quantitatively evaluate color vision acuity. Difficulty of the test was control)ed by the value of CDBACC (color difference between adjacent color chips) calculated using a CIELAB formula. The multiple 15-hue tests consist of eight of the hue tests (test 3-10) and three of the basic color (red, green, blue) tests (test 11-13). The 15 colors used for the hue tests were specified by the 15 color coordinates that were located at a constant distance (d = 2. 3. 5. 7, 10, 20, 30. 40) from white reference in the CIE chromaticity coordinate system and were separated by a constant color difference (CDBACC = 0.75, 1.1, 1.8. 2.5. 3.5. 7.5. 11, 14) from the adjacent chips. The color coordinates for the 15 chips for the basic color tests were the same as those of the 15 points spaced equally by a constant color difference (6.87 for the green color test. 7.27 for the red color test, 7.86 for the blue color test) from the white reference along the axis of red, green and blue. Thirty normal subjects who were not color blind were taken to undergo the multiple 15-hue tests. It was observed that most of the subjects correctly arranged color chips for the tests with CDBACC greater than 5, whereas no one correctly answered for those with CDBACC less than 2. Rapid changes in the number of the subjects correctly arranged took place when CDBACC of the tests was between 2 and 4.5. In the basic color tests, unlike the hue tests having similar values of CDBACC, it was seen that the subjects arranged color chips even less correctly. It was found that JNCD (just noticeable color difference) - a measure of color vision acuity was about 3 in average for the subjects. The JNCD was chosen as the value of the CDBACC of the test for which about $50\%$ of the subjects failed to successfully arrange color chips. ERCCA (error rate of color chips arrangement) for the test with CDBACC the same as the JNCD was shown to be about $20\%$. It is expected that the multi 15-hue tests implemented on a PC in the study will be an economical tool to quickly and quantitatively evaluate color vision acuity and, accordingly, the tests can be used for early diagnosis to massive potential patients suffering from diseases (ex. diabetes, glaucoma) which may induce changes in color vision acuity.

• Journal of dental hygiene science
• /
• v.9 no.2
• /
• pp.169-179
• /
• 2009

This study aims to present a fundamental data base to figure out the mental and the physical conditions that the dental technicians are facing and ultimately to develop a health care program to deal with their health related problems. To this end, we took an analysis on the health status among the subjects of 895 dental technicians currently working at the dental lab around the nation from January 15 to March 31, 2009 by way or Todai Health Index(THI). Of the average scale point in accordance with 12 scale scores of the physical and the mental subjective symptom, the results revealed that the physical appeals (21.10) were higher than the mental appeals (18.49) and the multiple subjective symptom was marked as 38.44 followed by the mental irritability (25.92). In gender differences, the females proved to be higher than the males in both physical appeals and mental appeals while the physical appeals were dominant in both genders. The physical appeals were higher than the mental appeals with regard to the general characteristics. In the case or the group or age twenties as shown in the physical and mental average scale point, the other groups showed 21.55% of the physical appeals among the married whereas the mental appeals showed the highest point as 18.70 in the unmarried group. In job position, the other groups marked the highest, in working condition, below average group marked the highest, in frequency of break time, none group marked the highest. We drew a conclusion form this study that the dental technicians gained the higher points in the item or the multiple subjective symptom, the menial irritability, and the irregular life. More research on th is phenomena should be followed along with the development of various and practical health care programs to promote the health or dental technicians.