• Journal of the Korean Graphic Arts Communication Society
• /
• v.27 no.1
• /
• pp.1-14
• /
• 2009

The color reproduction of digital still camera does not, in general, match those of the final output device. Because color gamut of these devices is different, it is therefore necessary to take account of a way to match. The way uses the optimized profile to output device an image. This paper proposed a way to create the input profile of digital still camera for standardization soft proofing process. The results of proposed way showed that for input profiles equivalent, good results relatively. In this paper, an experiment was done where the illumination sources used as the standard illumination 5200K and illuminated at a $45^{\circ}$ angle in the best illumination efficiently. The white balance was in mode 'custom' : aperture F11, exposure time 1/60s, ISO50, focal length 80mm. The images were exported and saved as 16bit RGB TIFF(AdobeRGB, sRGB, ProphotoRGB) images. To do the test, the RGB values of the RGB TIFF images are processed through the ICC input profile to arrive at processed $CIEL^*a^*b^*$ values. A profiling tool such as ProfileMaker 5.0 and Monacoprofile 4.8 are used to do this. The processed $CIEL^*a^*b^*$ values are compared to the reference $CIEL^*a^*b^*$ values and these two values are used to calculate a ${\Delta}E{^*}_{ab}$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.1
• /
• pp.36-41
• /
• 2016

Changes in target strength (TS) values of sandfish when sandfish was alive and dead were investigated using ex-situ at 120 kHz. TS values measured by tilt angles with -50~+50 degrees showed ranges from -71.0 to -53.3 dB for live sandfish, -63.1~-46.3 dB for thawed sandfish, and -70.0~-50.4 dB after 24 hours from thawed, respectively. It was shown that while TS values were similar between the case of live and the case of after 24 hours from thawed, mean TS values were higher by approximately 5 dB in the case of immediate thawed sandfish. It was also seen that TS values were similar between the case of thawed sandfish and the case of after 21 hours from live. The results showed that TS values of live sandfish were different from those of frozen sandfish. It implies that when estimating TS of frozen fish, the influx of bubbles and changes of body should be considered.

• The Korean Journal of Community Living Science
• /
• v.17 no.4
• /
• pp.39-48
• /
• 2006

This study was carried out to make a search for the usefulness of marigold plants (Tagetes erecta) as a natural dye. And we have also examined into the dyeability and antifungal activity of silk and cotton fabrics dyed with 2% powdered colorant and 1% liquid colorant. Almost surface colors of silk and cotton fabrics dyed with 2% powdered colorant and that dyed with 1% liquid colorant except for that treated Cu and Fe with mordants were shown by Y-level. $L^*$ values of silk fabrics dyed with 2% powdered colorant were 66.2 to 86.39, those $a^*$ values were -1.97 to 6.09, and those $b^*$ values were 13.69 to 35.97. And $L^*$ values of cotton fabrics dyed with 2% powdered colorant were 78.97 to 89.62, those a values were -3.39 to 0.38, and those $b^*$ values were 5.63 to 15.61 $L^*$ values of silk fabrics dyed with 1% liquid colorant were 34.37 to 85.57, those a values were -7.79 to 12.33, and those $b^*$ values were 15.13 to 82.91, And $L^*$ values of cotton fabrics dyed with 1% liquid colorant were 44.12 to 87.90, those $a^*$ values were -8.37 to 6.18, and those $b^*$ values were 11.65 to 78.87. Colorfastness of silk fabrics against light treated nothing with mordants and that dyed with 1% liquid colorant decreased for a little by second grade, however, that against washing, rubbing, perspiration and dry cleaning were increased over fourth grade. Colorfastness of cotton fabrics in terms of rubbing, light, and dry cleaning, except for washing and perspiration, were shown by over third grade, when that was treated nothing with mordants. Antifungal activities of silk fabrics treated nothing with mordants and dyed with 1% liquid colorant of marigold extracts were shown by 28.9% against Staphylococcus aureus. However, those of Al, Ca, Cu and tartaric acid mordanting were more than 25.5% against Staphylococcus aureus and Klebsiella pneumoniae.

• Journal of Nutrition and Health
• /
• v.27 no.4
• /
• pp.368-377
• /
• 1994

The purpose of this study was to investigate determining factors which influence the riboflavin and pyridoxin nutritional status of korean newborns. The riboflavin and pyridoxine nutriture were evaluated by measuring the enzymecoenzyme saturation kinetics of erythrocyte glutathione reductase and alanine aminotransferase. The subjects were 259 newborns and their mothers. The average activity coefficent values of the cord blood EALAT was 1.4$\pm$0.11 and 32% of the samples had EALATAC values greater than 1.25. EGRAC was 1.26$\pm$0.12 and 27.4 of the blood samples had EALATAC values greater than 1.25. Vitamine B6 nutrition of the newborns whose mothers consumed more energy, protein and vitamine B6 was better as cord blood EALATAC values were found to the lower in this group. A stepwise multiple regression analysis showed that birth length and mother's age significantly influenced EGRAC values, positive and negative ways, respectively.

• Journal of Ginseng Research
• /
• v.17 no.3
• /
• pp.228-231
• /
• 1993

Physicochemival properties of ginseng roasted at 170 to $250^{\circ}C$ were investigated. Soluble solid contents in roast ginseng increased until $200^{\circ}C$, but decreased at higher temperature than $200^{\circ}C$. Contents of reducing sugar and protein were decreased and pH values were dropped, while optical density, acidic polysaccharide contents, precursor of brown pigments and hydrogen donating activities by DPPH were increased according to increasing in roast temperatures. The color distribution of roast ginseng expressed as Hunter L, a and b values demonstrated that lower L values and higher a values were observed according to higher temperature, but b values were almost not changed.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.11
• /
• pp.925-933
• /
• 1991

Conventional stereo matching techniques are based on the assumption that the features representing an object in left and right images have fixed attribute values. But, in fact, such features may take different values due to the practical stereo image formation and the image acquisition error, and thus the conventional techniques tend to result in the in the incorrect matching of features. In this paper, we propose a stereo matching mathod with a possibilistic view which copes with the possible variability of feature values. As a result, this method decreases the number of incorrect matching features when the values of corresponding features are somewhat large. The effectiveness of the proposed method is shown via computer simulation.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.193-197
• /
• 1997

Theoretical studies on the base-catalyzed deprotonation of 4-phenacylpyridinium cations, R1-CO-CH2-C5H4N-R2, I (R1=YC6H4 -and R2=CH3), and II (R1=C6H5 and R2=CH2C6H4Y) have been carried out with bases, NH3 and XC6H4NH2 using AM1 MO method. The Brψnsted α values are 0.20 and 0.22 and the βB values are 0.62 and 0.61, respectively for cations I and II. The negative Ⅰ (=α-βB) values obtained are in accord with the experimental results in aqueous solution, although the theoretical gas-phase α values for I are somewhat smaller than the experimental values in water due to neglect of solvation effect. It has been stressed that the Brψnsted α is distorted not only by the lag in the resonance and solvation development in the carbanion, but also by the difference in the distance between the anionic center and substituents in the TS and in the product anion.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.147-154
• /
• 1995

In order to study the bonding mechanism of Ni/B/Ni transient liquid phase bonding system, width of liquid layers were calculated, where in this system melting point of insert material(B) is higher than bonding temperature and melting point of base metal(Ni). Caclulated values were compared with experimental ones which were measured by bonding Ni/B/Ni system at 1433-1474K under vacuum atmosphere. As results, the width of initial liquid layer of Ni/B/Ni system was calculated as $W_{IL}$ = $W_{o}$[1 + {2.100..rho.$_{S/}$ ( $X_{3}$ + $X_{4}$)..rho.$_{Ni}$ }-.rho.$_{S/}$.rho. Ni/], and it was nearly same with experimental values. Maximum width of liquid layer, width of liquid layer during isothermal solidification and isothermal solidification time were calculated also.o.o.o.

• Journal of Magnetics
• /
• v.17 no.3
• /
• pp.219-224
• /
• 2012

In the present study, changes in signal-to-noise ratio (SNR) and apparent diffusion coefficient (ADC) of the diffusion-weighted images in the normal livers were investigated using changes in b values in 1.5 T MR (magnetic resonance) instruments. Respective diffusion-weighted images and ADC map images were obtained from 20 healthy individuals by increasing b values from 50 to 400 and 800 $s/mm^2$ using 1.5T MR scanner between January 2011 and November 2011. At each ADC map image obtained at each b value, ADCs in the right hepatic lobe, spleen and kidney were measured. As a result, ADCs of the right hepatic lobe, spleen and kidney have gradually decreased in the diffusion-weighted images in accordance with the reduced b value. This outcome may be used as preliminary data for applications to various abdominal diseases.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.17-22
• /
• 2021

The shape of the blank greatly affects the formability and quality of the product after the stamping process. In this study, the geometry of the B-Pillar blank in the stamping process was optimized using design of experiments. The geometry of the blank for the B-pillar was simplified with the two length values and two radius values. The effects of design variables were studied through the Design of experiments. The stamping process of the B-pillar was predicted with the Finite Element Analysis (FEA). The optimized blank geometry was obtained. It results in the reduced maximum equivalent plastic strain. The local necking and the wrinkling did not occurred with the optimized blank geometry.