• Journal of the Korean Geosynthetics Society
• /
• v.22 no.2
• /
• pp.85-92
• /
• 2023

This paper describes the comparative results of measured and predicted values for the horizontal displacement of earth retaining wall based on two field cases, in order to evaluate the application of lateral earth pressure to earth retaining wall supported by earth anchor in Jeju. The prediction of lateral earth pressure acting on the earth retaining wall was performed by elasto-plastic analysis using Rankine earth pressure, Hong & Yun lateral earth pressure, Terzaghi & Peck modified lateral earth pressure, and Tschebotarioff lateral earth pressure. As a result, the predicted value of the maximum horizontal displacement for site A was about 10 to 12 times greater than the measured value, and in the case of site B, the predicted value was evaluated as about 9 to 12 times greater than the measured value. That is, both sites showed a similar increase rate in the maximum horizontal displacement by the predicted value compared to the measured value. In all field construction cases, the maximum horizontal displacement by measured values occurred in the sedimentary layer, soft rock layer, and clinker layer, and the horizontal displacement distribution was shown in a trapezoidal shape. The maximum horizontal displacement by the predicted value occurred around the clinker layer, and the horizontal displacement distribution was elliptical. In the ground with a clinker layer, the measured value showed a very different horizontal displacement tendency from the predicted value, because the clinker layer exists in the form of a rock layer and continuous layer. In other words, it is unreasonable to apply the existing prediction method, which is overestimated, because the characteristics of the earth pressure distribution in Jeju show a tendency to be quite different from the predicted earth pressure distribution. Therefore, it is necessary to conduct a research on the lateral earth pressure in the realistic Jeju that can secure more economic efficiency.

• Communications for Statistical Applications and Methods
• /
• v.16 no.5
• /
• pp.803-812
• /
• 2009

The application of extreme value theory to financial data is a fairly recent innovation. The classical annual maximum method is to fit the generalized extreme value distribution to the annual maxima of a data series. An alterative modern method, the so-called threshold method, is to fit the generalized Pareto distribution to the excesses over a high threshold from the data series. A more substantial variant is to take the point-process viewpoint of high-level exceedances. That is, the exceedance times and excess values of a high threshold are viewed as a two-dimensional point process whose limiting form is a non-homogeneous Poisson process. In this paper, we apply the two-dimensional non-homogeneous Poisson process model to daily losses, daily negative log-returns, in the data series of KBW/USD exchange rate, collected from January 4th, 1982 until December 31 st, 2008. The main question is how to estimate extreme quantiles of losses such as the 10-year or 50-year return level.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.153-156
• /
• 2000

동영상 정보는 영상정보뿐만 아니라 음성정보, 문자정보 및 각종 의미있는 정보들을 포함하고 있어서 기존의 검색방법으로는 사용자가 원하는 이미지를 찾는데 어려움이 따른다. 따라서, 본 연구에서는 동영상 정보의 효율적인 활용을 위한 색인방법으로 칼라 임계값을 이용한 컷 검출 방법을 제안하였다. 이것은 frame 간의 유사도를 측정해서 이 값이 주어진 임계값보다 작을 경우, 장면의 전환이 일어나는 곳을 컷 지점으로 검출하는 것인데, 동영상의 장면에 따른 유사도가 다를 수 있기 때문에, 컷을 구성하는 프레임들간의 칼라 임계값에 변동을 주어 최적의 컷 검출율을 구하고자 했다. 초기의 칼라 임계값은 '80'을 사용했고, 이후 frame 의 유사도가 임계값보다 클 경우, 즉 장면전환이 일어나지 않았을 경우일정한 상수 값을 초기 임계값에서 감산토록 하였다. 이러한, 과정을 거쳐 추출된 frame을 가지고 원하는 이미지를 검색하게 되면 사용자의 노력 및 검색 시간이 단축되고, 동영상 정보의 관리가 용이해진다.

• Bulletin of Food Technology
• /
• v.18 no.1
• /
• pp.127-135
• /
• 2005

상업적으로 시판되는 10주 미만의 식용 영계육을 처리하는 공정에서 25 그룹의 내장적출하지 않은 것 또는 내장적출한 도계육을 도계공정의 네지점에서 채취하였다. 도계 공정 각 지점의 계육으로부터 무작위로 선택된 부위에서 껍질을 잘라낸 것, 목의 껍질을 잘라낸 것, 셀룰로스 아세테이트 스폰지 재질의 스왑봉으로 계육을 스왑법으로 채취한 것, 또는 도계육을 통째로 세척한 세척액이다. 총균수, 대장균군, 대장균을 각 시료로부터 증균하였다. 사방 1 cm 안의 평균 로그값(log A)과 사방 25cm안에서 측정된 전체 측값치들의 로그값(N)은각 그룹 당 25개였다. 동일한 처리공정 단계에서 얻은 계육으로부터 얻은 같은 그룹의 세균의 측정값의 경우에, 무작위로 선택한 부위에서 잘라낸 껍질 또는 목에서 벗겨낸 껍질, 세척액 샘플에서 측정한 균수의 집합인 N의 세 값 또는 log A의 세 값은 <0.5 logunit 차이였다.그러나 스왑법으로 측정한 사방 1 cm안의 평균로그값(log A)과 사방 25 cm 안에서 측정된 전체측정치의 로그값(N)의 대략 절반이 다른 방법들로 측정한 동일한 측정항목의 값과 >0.5 log unit 까지 차이가 났다. 이런 결과로부터 도계육에서 무작위로 선택한 부위나 목에서 껍질을 잘라내는 방법, 또는 세척액 채취 등의 샘플링 방법은 도계육 표면의 단위영역 당 유사한 양의 세균이 검출될 것이라는 것을 나타낸다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.603-608
• /
• 2009

In this paper, a similarity measure between interval-valued vague sets is proposed. In the interval-valued vague sets representation, the upper bound and the lower bound of a vague set are represented as intervals of interval-valued fuzzy set respectively. Proposed method combines the concept of geometric distance and the center-of-gravity point of interval-valued vague set to evaluate the degree of similarity between interval-valued vague sets. We also prove three properties of the proposed similarity measure. It provides a useful way to measure the degree of similarity between interval-valued vague sets.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.1957-1964
• /
• 2010

In Video coding, the first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame of GOP affects the first frame as well as the following frames. Traditionally, the initial QP of a GOP is determined by the initial QP of the previous GOP and the average QP of the inter mode frames. In case of JM, the initial QP of a GOP is adjusted as the initial QP being less than the average QP of inter mode frames by two. However, this method is not suitable for the low bit rate video coding. In this paper, the linear relationship between the optimal QP and the ratio of the PSNR of the first frame and the average PSNR of the inter mode frames is first investigated and the linear model is proposed based on the results of the investigation. The proposed model calculate the optimal initial QP using the encoding results of the previous GOP. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JM algorithm.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.4
• /
• pp.214-223
• /
• 2004

Oxygen and hydrogen isotopic compositions of the Jurassic peraluminous Hwacheon granite were measured, and compared with those of other Jurassic peraluminous Daebo granite in Korea. $\delta$$\^$18/O values for quartz and feldspar of the Hwacheon granite range from 8.2 to 10.6 and 5.8 to 9.0$\textperthousand$, respectively. Whole rock $\delta$$\^$18/O values for banded biotite gneiss country rocks surrounding the Hwacheon granites range from 8.1 to 9.4$\textperthousand$. Whole rock and biotite $\delta$D Values for Hwacheon granite range from -84 to -113 and -107 to -113$\textperthousand$, respectively. Whole rock $\delta$D values for banded biotite gneiss country rocks range from -76 to -100$\textperthousand$. Both $\delta$$\^$18/O and $\delta$D values of the Hwacheon granite are characterized by low values compared to the 'normal' values for the fresh peraluminous granitic rocks. Low $\delta$$\^$18/O values of the Hwacheon granite resulted from fluid-rock interaction for a long period. Isotopic modelling result renders that a relatively low-$\delta$$\^$18/O fluid below -1$\textperthousand$ was involved in subsolidus isotopic exchange under a relatively high fluid/rock ratio (<-6). The fluid of meteoric origin has experienced a modification of oxygen isotopic composition as a result of fluid-rock interaction with the Hwacheon granite and surrounding metapelitic country rocks.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.119-126
• /
• 2003

The size of low voltage level conductor cables can be installed with a long length just like a aviation field, shall be determined for considering the ampacity of cable and the drop of voltage for the power system. Therefore, The size of the conductor cables may be larger one for considering the tolerable voltage drop comparatively, although the allowable ampacity of the conductor cables may have a margin in comparison with the rated full load current In this case, the conductor cables' allowable ampacity will be very larger than the rated full load current and the generated heat of the conductor will be relatively downed. The conductor cables' alternating current resistance corrected with the maximum allowable temperature of the conductors, has been applied on the general formula for the calculating the voltage drop in determinating the size of low voltage level conductor cables, and the resistance is larger than the resistance corrected with the actual temperature of the conductor cables. This paper was studied for the purpose of the conductor resistance corrected with the actual temperature rise of the conductor and address the economic design formula so that this studies shall minimize the errors which can be occurred in comparison with the general formula and which can be applied in design work for determining the size of low voltage level conductor cables.

• Journal of the Korean Vacuum Society
• /
• v.3 no.2
• /
• pp.158-165
• /
• 1994

액체금속 이온 소오스의 모양에 대한 개선된 원추 모델을 제시하였다. 이 모델에서는 전도성 유 체의 테일러 원추를 0차 모양으로 하고 원추에서 벗어난 변형을 전자유체 역학적으로 취급하였다. 외부 의 전기적 스트레스 때문에 원추정점에서 일어나는 돌출을 오직 ra인 영역에서는 변형 이 없다는 것으로 정의되는 값이다. 이 가정에 의하여 각변형ζ는 다음같은 형태를 가졌다: r$\varepsilon$(t)이고 r>adlsrudn는 ζ=(a/r)$\varepsilon$이다. 여기서 지수 s는 변형의 모양을 나타내는 값이다. 이것을 모양방정식에 대입하여 계산한 결과 모양의 불안정되는 전위값은 Vc(r, h)=V0(h) V1은 1차의 표 면이 불안정되는 전위값으로 이온방출을 일어나는데 필요한 여분 값이다. 이렇게 얻어진 이온방출의 임 계전위 Vc는 실험치와 부합되는 값이었다. 더욱 중요한 것은 위의 Vc 형태가 국지불안정을 설명하여 주었다. 또한 외부에서 걸어준 전위가 임계전위값을 넘을 때 각변형 ζ>0이고 )

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.161-171
• /
• 2014

When the Hough transform is applied to identify an instance of a given model, the output is typically a histogram of votes cast by a set of image features into a parameter space. The next step is to threshold the histogram of counts to hypothesize a given match. The question is "What is a reasonable choice of the threshold?" In a standard implementation of the Hough transform, the threshold is selected heuristically, e.g., some fraction of the highest cell count. Setting the threshold too low can give rise to a false alarm of a given shape(Type I error). On the other hand, setting the threshold too high can result in mis-detection of a given shape(Type II error). In this paper, we derive two conditional probability functions of cell counts in the accumulator array of the generalized Hough transform(GHough), that can be used to select a scientific threshold at the peak detection stage of the Ghough.