• 전기학회논문지
• /
• 제57권5호
• /
• pp.808-815
• /
• 2008

The composites were fabricated 61[vol.%] ${\beta}$-SiC and 39[vol.%] $TiB_2$ powders with the liquid forming additives of 8, 12, 16[wt%] $Al_2O_3+Y_2O_3$ as a sintering aid by pressureless annealing at 1650[$^{\circ}C$] for 4 hours. The present study investigated the influence of the content of $Al_2O_3+Y_2O_3$ sintering additives on the microstructure, mechanical and electrical properties of the pressureless annealed SiC-$TiB_2$ electroconductive ceramic composites. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the pressureless annealed SiC-$TiB_2$ electroconductive ceramic composites. Phase analysis of SiC-$TiB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), ${\beta}$-SiC(3C), $TiB_2$, and In Situ YAG($Al_2Y_3O_{12}$). The relative density of SiC-$TiB_2$ composites was lowered due to gaseous products of the result of reaction between SiC and $Al_2O_3+Y_2O_3$. There is another reason which pressureless annealed temperature 1650[$^{\circ}C$] is lower $300{\sim}450[^{\circ}C]$ than applied pressure sintering temperature $1950{\sim}2100[^{\circ}C]$. The relative density, the flexural strength, the Young's modulus and the Vicker's hardness showed the highest value of 82.29[%], 189.5[Mpa], 54.60[Gpa] and 2.84[Gpa] for SiC-$TiB_2$ composites added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at room temperature. Abnormal grain growth takes place during phase transformation from ${\beta}$-SiC into ${\alpha}$-SiC was correlated with In Situ YAG phase by reaction between $Al_2O_3$ and $Y_2O_3$ additive during sintering. The electrical resistivity showed the lowest value of 0.0117[${\Omega}{\cdot}cm$] for 16[wt%] $Al_2O_3+Y_2O_3$ additives at 25[$^{\circ}C$]. The electrical resistivity was all negative temperature coefficient resistance (NTCR) in the temperature ranges from $25^{\circ}C$ to 700[$^{\circ}C$]. The resistance temperature coefficient of composite showed the lowest value of $-2.3{\times}10^{-3}[^{\circ}C]^{-1}$ for 16[wt%] additives in the temperature ranges from 25[$^{\circ}C$] to 100[$^{\circ}C$].

• 자원환경지질
• /
• 제30권6호
• /
• pp.603-612
• /
• 1997

경상누층군이라 불리는 백악기 육성퇴적암-화산쇄설물들은 백악기 말-제3기초의 화강암류에 의해 관입 되어 있다. 의성-신령지역의 화강암류는 다양한 암상과 화학조성을 갖는다 : 반려암; 46.9, 섬록암; 58.3, 흑운모 화강암; 66.3~69.3, 장석 반암; 71.0 wt.% $SiO_2$. 화산암류는 화학적으로 금성산 칼데라에서는 안산암질 성분이 결여 된 현무암-유문암의 bimodal 유형과 선암산-화산 칼데라에서는 안산암-유문암의 felsic 유형으로 나뉜다. 대부분의 화성암류는 비알칼리 계열에 속하고, 칼크-알칼리 마그마의 분화 경로를 따른다. 화강암류는 높은 Zr/Y비에 의해 화산암류와 잘 구별된다. 화산암류에서 Zr/Y와 K/Y비의 차이는 맨틀기원 및 분별작용에서 불균질로 설명될 수 있다. 콘드라이트로 균질화된 희토류 원소량은 화강암류에서 Th와 K이 결핍되어 있고, 금성산 칼데라의 유문암에서 Sr와 Ti의 결핍되어 있다. 선암산-화산 칼데라의 유문암은 Rb, La 및 Ce이 부화되어 있다. $Rb-SiO_2$와 Rb-Y+Nb의 관계도는 화강암류와 화산암류가 화산호 환경이었음을 암시한다. K-Ar 연대는 4회의 심성활동 (섬록암; 89 Ma, 화강암; 64~62 Ma, 화강암/반암류; 55~52 Ma, 반려암; 52~45 Ma)으로 나뉘고, 금성산 칼데라의 bimodal 유형 (71~66 Ma)과 선암산-화산 칼데라의 felsic 유형 (61~54 Ma)으로 특징지워지는 화산활동이 수반되었다. 지화학 및 연대측정 자료들은 화성암류가 백악기말-제3기초 동안 다양한 지질학적 에피소드의 결과로 형성되었슴을 암시한다.

• 자원환경지질
• /
• 제25권4호
• /
• pp.435-446
• /
• 1992

REE, major and trace elements analyses of the Jurassic Daebo granite and Cretaceous Bulguksa granite were carried out to interpet their petrogenesis and relationships between petrogenesis and tectonics. Analytical results are summarized as follows. (1) $SiO_2$ content of the Bulguksa granite (aver. 74.6%) are significantly higher than those of the Daebo granite (aver. 68.1%). Major elements of $TiO_2$, $Al_2O_3$, $P_2O_5$, CaO, MgO, Total FeO, and trace elements of Co, V and Sr are negatively correlated with $SiO_2$. Incompatible elements such as Ba, Sr, Y, Zr and HREE are contained differently in the Bulguksa granites distributed in between Okchon folded belt and Kyongsang sedimentary basin. (2) Trace element abundances show a good discrimination between two goups of granitic rocks. Ba, Sr and V are enriched in Daebo granites, while Zn and Cr are depleted in them. (3) Jurassic granites have quite different Eu anomalies and REE patterns from those of Cretaceous granites: Large negative Eu anomaly in the former and mild or absent Eu anomaly in the latter. The large Eu negative of Cretaceous granitic rocks are interpreted as a differentiated product of fractional crystallization of granitic magma from the upper mantle. Meanwhile, the Daebo plutonic rocks was resulted from the partial melting of subcrustal material or crustal contamination during ascending granitic magma from the mantle. Senario of igneous activities of Mesozoic age in South Korea was proposed based on Kula-Pacific ridge subduction model.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.58-63
• /
• 2014

This paper deals with the effects of counterpart materials on the wear behavior of thermally sprayed STS316 coatings. STS316 powders were flame-sprayed onto a carbon steel substrate. Dry sliding wear tests were performed using the applied loads of 15 N. AISI52100, $Al_2O_3$, $ZrO_2$ and $Si_3N_4$ balls were used as counterpart materials. Wear behavior of STS316 coatings against different counterpart materials were studied using a scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS). The results show that the wear behavior of thermally sprayed STS316 coatings strongly depends on the type of counterpart material. Dominant wear mechanism was similar for all studied materials as failure of adhesion film except for Si3N4 used as counterpart material. In the case of Si3N4 used as counterpart material, dominant wear mechanism was abrasion.

• 자원환경지질
• /
• 제46권2호
• /
• pp.179-198
• /
• 2013

신장 위구르 자치구 바이청현 보즈구얼 지역의 A형 화강암체는 타림지대의 북쪽 끝과 동서쪽 방향의 알칼리 관입암대에 접하여 위치해 있다. 이 화강암체는 추휘석(aegrine)이나 아페소나이트(arfvedsonite)-석영-알칼리장석 섬장암, 또는 아페소나이트-알칼리장석 화강암, 흑운모-알칼리장석 섬장암으로 구성되며, 주요광물로는 알바이트(albite), K-장석, 석영, 아페소나이트(arfvedsonite), 추휘석, 시데로필라이트(siderophyllite) 등이 있으며 부성분 광물로는 지르콘(zircon), 파이로클로르(pyrochlore), 토라이트(thorite), 형석, 모나자이트(monazite), 바스네사이트(bastnaesite), 제노타임(xenotime), 아스트로필라이트(astrophyllite) 등이 있다. 이 알칼리 화강암체는 67.32%의 평균값을 갖는 $SiO_2$를 포함하고 평균 11.14%의 높은 $Na_2O+K_2O$(9.85~11.87%) 조성을 보이며 이 중 $K_2O$는 평균 4.73%의 조성을 보인다. $K_2O/Na_2O$의 비는 0.31~0.96 사이이며 $Al_2O_3$는12.58%부터 15.44%사이로 포함되고 총 $FeO^T$함량은 2.35~5.65%이내이다. CaO, MgO, MnO, $TiO_2$의 함량은 낮은 것으로 관찰된다. 희토류원소의 총량은 평균 $77{\times}10^{-6}$으로 비교적 높게 나타나고 경희토원소는 농축되어 있지만 중희토원소는 Eu원소의 부(-)의 이상과 함께 상대적으로 결핍되는 특징을 가진다. 또한 알칼리 화강암체의 chondrite-normalized 희토류원소의 패턴은 오른쪽으로 기울어진 갈매기형태를 보인다. Zr는 평균 $594{\times}10^{-6}$의 함량을 보이며 Zr+Nb+Ce+Y는 평균 $1362{\times}10^{-6}$의 함량을 나타낸다. 또한 이 알칼리 화강암체는 높은 HFSE(Ga, Nb, Ta, Zr, Hf)함량과 낮은 LILE(Ba, K, Sr)함량을 보인다. Nb/Ta의 비는 평균 16.5이며 Zr/Hf의 비는 평균 36.80이다. 지르콘은 경희토원소에서 결핍되고 중희토원소에서 농축되어있다. 지르콘의 chondrite-normalized 희토류원소는 Eu원소의 강한 부(-)의 이상과 함께 왼쪽으로 기울어진 갈매기형태를 보인다. 보즈구얼지역의 A타입 화강암체는 A1타입의 화강암과 유사한 특징을 나타낸다. 화강암질 마그마의 평균온도는 $832{\sim}839^{\circ}C$이며 보즈구얼 지역의 A타입 화강암체는 지각과 맨틀의 혼합양상을 보이며 고온, 무수, 낮은 산소의 퓨개시티(fugacity) 환경을 가진 판 내부의 비조산대에서 생성되었을 가능성이 있다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.16-16
• /
• 2012

Mg and its alloys have been of great interest because of their low density of 1.7, 30% lighter than Al, but their wide applications have been limited because of their poor resistances against corrosion and/or abrasion. Corrosion resistance of Mg alloys can be improved by formation of anodic films using anodic oxidation method in aqueous electrolytes. Plasma electrolytic oxidation (PEO) is one of anodic oxidation methods by which hard anodic films can be formed as a result of micro-arc generation under high electric field. PEO method utilize not only substrate elements but also chemical components in electrolytes to form anodic films on Mg alloys. PEO films formed on AM50 magnesium alloy in an acidic fluozirconate electrolyte were observed to consist of mainly $ZrO_2$ and $MgF_2$. Liu et al reported that PEO coating on AM30 Mg alloy consists of $MgF_2$-rich outer porous layer and an MgO-rich dense inner layer. PEO films prepared on ACM522 Mg die-casting alloy in an aqueous phosphate solution were also reported to be composed of monoclinic $Mg_3(PO_4)_2$. $CeO_2$-incorporated PEO coatings were also reported to be formed on AZ31 Mg alloys in $CeO_2$ particle-containing $Na_2SiO_3$-based electrolytes. Magnesium tin hydroxide ($MgSn(OH)_6$) was also produced on AZ91D alloy by PEO process in stannate-containing electrolyte. Effects of $OH^-$, $F^-$, $PO{_4}^{3-}$ and $SiO{_3}^{2-}$ ions and alloying elements of Al and Sn on the formation of PEO films on pure Mg and Mg alloys and their protective properties against corrosion have been investigated in this work. $PO{_4}^{3-}$, $F^-$ and $SiO{_3}^{2-}$ ions were observed to contribute to the formation of PEO films but $OH^-$ ions were found to break down the surface films under high electric field. The effect of pulse current on the formation of PEO films will be also reported.

• 오토저널
• /
• 제12권5호
• /
• pp.60-75
• /
• 1990

Advanced Ceramics have some excellent prosperities as the material for the mechanical component. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this study, various machining experiments are carried out to obtain the basic knowledge of grinding High Strength Ceramics with high efficiency and precision for the purpose of application to Automobile parts. Advanced Engineering Ceramics such as Si$_{3}$N$_{4}$, SiC, ZrO$_{2}$, $Al_{2}$O$_{3}$ are ground with diamond wheels using conventional grinding machine. Results obtained in this study provide some useful informations to attain the high efficiency grinding of Advanced Ceramics.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.35-42
• /
• 2011

This paper describes the characteristics of high speed grinding and the influence of wheel surface speed V and a grindability of the grinding materials. The various fine ceramics pieces was ground by metal and vitrified bonded diamond wheel. The surface roughness of fine ceramics(Zirconia($ZrO_2$), Silicon Carbide(SiC), Silicon Nitride($Si_3N_4$), Alumina($Al_2O_3$)) decreases from $0.05{\mu}m(R_{max})$ to $0.025{\mu}m(R_{max})$ when the wheel speed at grinding point increases the wheel speed. Relation between the temperature at grinding point and surface roughness was linear. Abrasive jet machining(AJM), a specialized from of shot blasting, is considered one of the most helpful micro machining methods for hard and brittle materials such as glasses and ceramics by constant pressure grinding.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.611-615
• /
• 2003

Eu-doped lead zirconate titanate(Pb$\sub$1.1/(Zr$\sub$0.6/Ti$\sub$0.4/)O$_3$; PZT) thin films on the Pt/Ti/SiO$_2$/Si substrates prepared by a sol-gel method. The effect on structural and electrical properties of PZT thin films measured according to the Eu content. Eu-doping altered significantly dielectric and ferroelectric properties. The remanent polarization and the coercive field decreased with the increasing Eu content. The dielectric constant and the dielectric loss of PZT thin films decreased with the increasing Eu content. The 0.5 mol% of Eu-doped PZT thin film showed improved fatigue characteristic comparing to the undoped PZT thin film.

• 한국정밀공학회지
• /
• 제7권2호
• /
• pp.105-112
• /
• 1990

Advanced ceramics have some excellent properities as the material for the mechanical component. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper, some experiments are carried out to find the basic grinding characteristic of advanced ceramics. Representative advanced ceramics, such as AL/sub 2/ O/sub 3/, ZrO/sub 2/, SiC and Si/sub 3/N/sub 4/and ground with diamond wheels. Special attention is paid to comparison between the conventional and creep feed grinding. Results obtained in this study provide some useful informations to attain the high efficiency grinding of advanced ceramics.