• Korean Journal of Environmental Biology
• /
• v.19 no.4
• /
• pp.313-320
• /
• 2001

An ecological study was conducted to determine the geographic distribution, community structure, and habitat characteristics of eelgrass, Zostera marina L. beds along the southern coast of Korea. Plants and sediment samples were collected during June 2000 and December 2000 on twenty-eight locations, including two Cheju Island stations, which were used to compare morphological characteristics with habitat types. Z. marina populations existed from the intertidal to subtidal zone, mainly in the bays along the coast and the island, the barrier reef, and the estuary where the water depth was 0.5${\sim}$8.0m. Salinity range in Z. marina beds ranged 18.2 to 34.5%$_o$. Sediments of Z. marina beds contained 49.7${\sim}$99.1% of sand and were classified into sand, muddy sand, and sandy mud. Mean grain size varied from 1.5 to 4.4 phi. Height of vegetation shoots varied from 54.7 to 171.4 cm, depending on water depth, location, substrata and habitat types. quantitative morphological features that enabled recognition of the two phonetic groups were short-narrow leaf type and long-broad leaf type. Statistical analysis indicated that biomass of individual plants and their quantitative morphological characteristics were significantly correlated.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.675-682
• /
• 2013

To verify the effect of inner- and outer-stage gas jets, a shear coaxial injector was designed to analyze the axial velocity profile and breakup phenomenon with an increase in the measurement distance. When the measurement position was increased to Z/d=100, the axial flow showed a fully developed shape due to the momentum transfer, aerodynamic drag effect, and viscous mixing. An inner gas injection, which induces a higher momentum flux ratio near the nozzle, produces the greater shear force on atomization than an outer gas injection. Inner- and Outer-stage gas injection do not affect the mixing between the inner and outer gas flow below Z/d=5. The experiment results showed that the main effect of liquid jet breakup was governed by the gas jet of an inner stage. As the nozzle exit of the outer-stage was located far from the liquid column, shear force and turbulence breaking up of the liquid jets do not fully affect the liquid column. In the case of an inner-stage gas injection momentum flux ratio within 0.84, with the increase in the outer gas momentum flux ratio, the SMD decreases. However, at an inner-stage gas jet momentum flux ratio over 1.38, the SMD shows the similar distribution.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.389-392
• /
• 2015

We identify a strong lensing galaxy in the cluster IRC 0218 that is spectroscopically confirmed to be at z = 1.62, making it the highest-redshift strong lens galaxy known. The lens is one of the two brightest cluster galaxies and lenses a background source galaxy into an arc and a counterimage. With Hubble Space Telescope (HST) grism and Keck/LRIS spectroscopy, we measure the source redshift to be $z_S=2.26$. Using HST imaging, we model the lens mass distribution with an elliptical power-law profile and account for the effects of the cluster halo and nearby galaxies. The Einstein radius is $^{\theta}E=0.38^{+0.02{\prime}{\prime}}_{-0.01}$ ($3.2^{+0.2}_{-0.1}kpc$) and the total enclosed mass is $M_{tot}(<^{\theta}_E)=1.8^{+0.2}_{-0.1}{\times}10^{11}M_{\odot}$. We estimate that the cluster environment contributes ~ 10% of this total mass. Assuming a Chabrier IMF, the dark matter fraction within $^{\theta}E$ is $f^{Chab}_{DM}=0.3^{+0.1}_{-0.3}$, while a Salpeter IMF is marginally inconsistent with the enclosed mass ($f^{Salp}_{DM}=-0.3^{+0.2}_{-0.5}$).

• Publications of The Korean Astronomical Society
• /
• v.7 no.1
• /
• pp.231-253
• /
• 1992

A model for the distribution of stars in the disk and the spheroid of our Galaxy is reexamined from an edge-on view of the Galaxy obtained by selecting infrared sources from the IRAS Point Source Catalog. The sources are counted as a function of galactic latitude. longitude and $12{\mu}m$ apparent magnitude. The source counts are reasonably separated into the disk component and the spheroid component contributions and each of the contributions is further interpreted as a convolution of a spatial density distribution and a luminosity function based on the least-square fit method. The spatial density of the disk component has an exponential radial scale length of $h_R{\sim}2.6\;kpc$ and the vertical distribution follows a canonical $sech^2$ law with a scale height $h_z{\sim}240\;pc$. The distribution of the spheroid component can be represented by an oblate spheriod with an axis ratio $k{\sim}0.61$ and a de Vaucouleurs' $r^{1/4}$ law with an effective radius of $R_e{\sim}120\;pc$. The steep density gradient of the spheroid component is consistent with that of late M giants in the central bulge. The luminosity functions of the disk and the spheroid component stars resemble respectively those of the K luminosity function of disk M giants (Garwood and Jones 1986) and the bolometric luminosity function of M giants in bulge fields (Frogel et al, 1990).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.110-119
• /
• 2009

In this study magnetic fields near electric power lines with branch lines which have a arbitrary angle were derived and formulated by dipole antenna theory and could be calculated easily using the formula. It seems that those formula could be applicable to the consideration of magnetic fields during the design of distribution lines with branch lines. As an example those formulated equations on elements of magnetic fields were applied to a model of 3 phase distribution lines with branch lines and calculated by Matlab programs and the results were presented The analyzed results are follows. The resultant magnetic field is dominated by the componant By all over y-axis in the case of the smaller branched angle $\alpha$ and the lower observed point z. In case of ${\alpha}=\frac{\pi}{2}$[rad], the resultant field is affected by the componant Bx. The resultant field is dominated by the componant Bz at the vicinity of the power lines and it shows very large value at the branch line position of y-axis in case of ${\alpha}>\frac{\pi}{2}$.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.6
• /
• pp.255-262
• /
• 2001

This paper deals with characteristic analysis method of the slotless type Permanent Magnet Linear Synchronous Motor(PMLSM) using the space harmonic method. Analysis models of the PM and the armature current are described by the magnetization configurations taking into account the 2D and 3D distribution. In 3D analysis, the thrust and normal force can be calculated more accurately, because it can consider the z component flux density which is impossible in 2D analysis. In order to verify the validity of the proposed method, the results of the analytic method are compared with not only the experimental ones but ones of Finite Element Method(FEM).

• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.217-247
• /
• 2016

Five extended cylindrical reticulated shells are proposed by changing distribution rule of diagonal rods based on three fundamental types. Modeling programs for fundamental types and extended types of cylindrical reticulated shell are compiled by using the ANSYS Parametric Design Language (APDL). On this basis, conditional formulas are derived when the grid shape of cylindrical reticulated shells is equilateral triangle. Internal force analysis of cylindrical reticulated shells is carried out. The variation and distribution regularities of maximum displacement and stress are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of cylindrical reticulated shells and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization for three fundamental types and five extended types is calculated with the span of 30 m~80 m and rise-span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise-span ratio are analyzed with contrast to the results of shape optimization. The optimal combination of main design parameters for five extended cylindrical reticulated shells is investigated. The total steel consumption affected by distribution rule of diagonal rods is discussed. The results show that: (1) Parametric modeling method is simple, efficient and practical, which can quickly generate different types of cylindrical reticulated shells. (2) The mechanical properties of five extended cylindrical reticulated shells are better than their fundamental types. (3) The total steel consumption of cylindrical reticulated shells is optimized to be the least when rise-span ratio is 1/6. (4) The extended type of three-way grid cylindrical reticulated shell should be preferentially adopted in practical engineering. (5) The grid shape of reticulated shells should be designed to equilateral triangle as much as possible because of its reasonable stress and the lowest total steel consumption.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.12 no.2
• /
• pp.109-118
• /
• 2008

We present a new version of the first return time test for pseudorandomness. Let $R_n$ be the first return time of initial n-block with overlapping. An algorithm to calculate the probability distribution of the first return time $R_n$ for each starting block is presented and used to test pseudorandom number generators. The standard Z-test for log $R_n$ is applied to test the pseudorandom number generators.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.6 no.2
• /
• pp.25-30
• /
• 2002

Let $E/{\mathbb{Q}$ be an elliptic curve defined over rationals, P is a non-torsion rational point of E and $$S=\{[n]P{\mid}n{\in}{\mathbb{Z}}\}$$. then S is dense in the component of $E({\mathbb{R}})$ which contains the infinity in the usual Euclidean topology or in the topology defined by the invariant Haar measure and it is uniformly distributed.

• Korean Journal of Plant Resources
• /
• v.30 no.2
• /
• pp.176-190
• /
• 2017

South Korea is the northernmost distributional territory on the Camellietea japonicae (evergreen broad-leaved forests of the warm-temperate zone) in East Asia. A total of 40 stands were collected in terms of an ecologically-naturalized wild tea population (WTP), and their species composition was analyzed by $Z{\ddot{u}}rich$-Montpellier School's method with preliminary regard to forest canopy idendtification. Stand types were characterized by ecological flora's criteria such as Raunkiaer's life-form, neophyte, zonal distribution, and nativeness of species. Expansion of WTP distribution into the interior of the peninsula was recognized, than expected. The highest and northernmost WTPs have been recorded at Mt. Palgong, Daegu (390 m a.s.l.) and Iksan Jeonbuk (latitude $36^{\circ}$ 03' 33''), respectively. Altitudinal and latitudinal WTP distribution of Korea under continental climate shows lower than Japanese situation under oceanic climate. Community structure generally involved a few human interferences. Syngeographically WTP distribution was limited on the warm-temperate zone and the southernmost cool-temperate southern submontane zone. First driving force on distributional expansion of the WTP was anthropogenic, particularly in the northernmost distribution area. We finally confirmed an actual existence of the WTP in South Korea and suggested a long-term monitoring on the WTPs in national view of in-situ genetic resources with higher frost-resistance.