• Molecular & Cellular Toxicology
• /
• v.4 no.1
• /
• pp.11-15
• /
• 2008

The expression of neuronal nitric oxide synthase (nNOS) is regulated by various spliced first exons (exon 1a-1i), sharing differentially common exon 2 in diverse human tissues. The highly complex structure and regulation of human nNOS gene gave limitations of information for the precise mechanism of nNOS regulation. In the present study, we report that the repeats of polymorphic dinucleotides $(GT)^nA(TG)^n$ repeats located in just upstream to the exon 1f in human nNOS gene play suppressive role in transcription, as shown in the characteristics of Z-DNA motif in other genes. In neuronal and trophoblast cells transfected transiently with luciferase construct without dinucleotide repeats at the 5'-flanking region of exon 1f in nNOS gene, the luciferase activity was increased markedly. However, the presence of the dinucleotide repeats dramatically suppressed the luciferase activity to the basal level, and which was dependent on the length of $(GT)^n$ and $(TG)^n$ repeats. More importantly, we found the polymorphisms in the length of dinucleotide repeats in human. Furthermore, we show for the first time here that there is a significant association of the lengths of polymorphic dinucleotide $(GT)^n$ and $(TG)^n$ repeats with the risk of schizophrenia.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.221-235
• /
• 2005

The purpose of this study was to analyse badminton players' drop-shots, in order' to make players understand the principles of drop-shot motion in badminton. Three dimensional analysis was used to measure movements such as the time required per section, the change of center of gravity, joint angle and speed, and joint speed. The results of this study revealed as follows: (1) top players are faster than amateurs in the total time required per section; (2) top players moved more in the x-axis and z-axis, while amateurs moved more in the y-axis; (3) the inclination of amateurs was greater than that of top players in all phases; (4) amateurs showed larger angle on the shoulder joints than top players in the first phase, while top players showed larger angle on the shoulder joint than amateurs in the second and third phase. Amateurs' angle was larger on angle joint in the first phase than top players' ones, while top players' angle was larger in the third phase than amateurs; (5) the speed of racket head of top players was faster than that of amateurs; and the velocity of the center of gravity of amateurs was greater than that of the top players. The findings of this study were that gravity decreases during impact and then the velocity increases to perform the follow-through and making the swing fast by increasing the speed of the racket head is most important.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.2
• /
• pp.145-149
• /
• 2004

The expression of a fusion protein comprised of the B. thuringiensis crystal protein, Cry1Ac, and enhanced green fluorescent protein (EGFP) in Escherichia coli XLl-blue was examined. Three recombinant plasmids were transformed into E. coli XL1-blue and named as ProAc/Ec, MuEGFP/Ec and ProMu-EGFP/Ec, respectively. All transformants were observed by light and fluorescence microscopy at mid-log phase. The expression in E. coli transformants, ProMu-EGFP/Ec and MuEGFP/Ec, exhibited bright enough fluorescence to be observed. Furthermore, ProMu-EGFP/Ec produced fluorescent inclusions, which may have been recombinant crystals between EGFP and Cry1Ac while MuEGFP/Ec expressed soluble EGFP in cell. In SDS-PAGE, ProAc/Ec had 130 kDa crystal protein band and MuEGFP/Ec had thick 27 kDa EGFP band. However, ProMu-EGFP/Ec had about 150 kDa fusion protein band. Accordingly, these results indicated that a fusion protein between the B. thuringiensis crystal protein and a foreign protein under the lacZ promoter was successfully expressed as granular structure in E. coli. It is suggested that the E. coli expression system by N-terminal fusion of B. thuringiensis crystal protein may be useful as excellent means for fusion expression and characterization of B. thuringiensis fusion crystal protein.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.512-522
• /
• 2012

This study is focused on fish fauna and distributional features along with physical gradients and stream orders in the Tamjin River basin, Korea. Fish sampling and investigation were conducted for 2 years from 2009 to 2010. Total number of fish species collected were 47 species of 16 family. The group of cyprinidae was mostly abundant. Both fish abundance and biotic index were declined with increasing altitude and longitudinal distance from the river mouth. Two species of Zacco temminckii and Pungtungia herzi were prevalent in most of sampling sites and showed no altitudinal and longitudinal differences. Most other species, however, were spatially restricted to specific regional altitudes. Several species including Zacco platypus, Squalidus gracilis majimae and P. herzi were broadly distributed from river mouth to 50 km. Eight species including Z. temminckii and Rhynchocypris oxycephalus only appeared in over 10 km from the river mouth. Both Odontobutis platycephala and Pseudobagrus koreanus were classified as "upstream dewelling species" observed only in over 30 km from the river mouth. High proportion of tolerant and omnivorous species were more dominated in the downstream zone of the dam, whereas intolerant and insectivorous species were abundant in the upstream zone of the dam. The variable of stream order showed positive relationship between number of fish species and total individuals collected. Sensitive species including insectivore had a declining tendency with increasing stream order, while tolerant specie including omnivore species had relatively increased with stream order. Overall, our study suggested that fish distribution considerably depends on altitudinal gradient and longitudinal distance from the river mouth as well as physical habitat.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.22-30
• /
• 1991

This study was carried out to determine the Joint characteristic of L-type specimens. L-type specimens were made of two kinds uf solid woods(Antiaris, Sepetir) and three kinds of wood based materials(plywood, particleboard, medium density fiberboard). They were constructed with PVC anchor and screw, and were discussed with joint strength and stiffness coefficients. The obtained results were as follows: 1. Bending strength showed very high increasing rate from one to three used PVC anchor and screw but was a little rise from three to four used PVC anchor and screw in solid wood. However. in wood based materials, it was unchanged without increasing rate or slight decreased from three to four used PVC anchor and screw. 2. The stiffness coefficients, or Z-values, were in the range from $4.704\times10^{-4}$ to $1.864\times10^{-3}$(rad/kgf-cm). They showed $10^{-3}$ level in one PVC anchor and screw but $10^{-4}$ level in two, three. four PVC anchor and screw. Accordingly, they indicated flexible joints in one PVC anchor and screw and relatively stable joints in two, three. four PVC anchor and screw. 3. Measured ultimate bending moments were 258.70kgf-cm in plywood and 142.68kgf-cm in medium density fiberboard. 4. Comparing with dowel joint. the joint strength used PVC anchor screw was inferior to 8mm and 10mm dowel diameter but differ little from 6mm dowel diameter.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.47-55
• /
• 1996

UV transmission spectra of water-soluble acrylic resin films containing hydroxybenzophenolic, hydroxyphenylbenzotriazolic UV absorber and HALS(hindered amine light stabilizer) were investigated by exposure time(before exposure weathered for 160 and 320hours) in QUV Weather-Ometer. Also the YID(yellowness index difference), LID(lightness index difference) and CD(color difference) of dried water-soluble acrylic resin films and the coated woods of Larix leptolepis were analyzed by addition level of UV absorber(0, 1, 2 and 3%) and HALS(0, 0.5, 1 and 1.5%) and by exposure time in QUV Weather-Ometer. They showed no significant effects on UV transmission spectra of dried water-soluble acrylic resin films in the range of 300 to 400nm irrespective of exposure time. However, UV transmission decreased as increase of exposure time. UV transmission spectra were lower in dried water-soluble acrylic resin films containing hydroxybenzophenolic UV absorber and HALS than in these containing hydroxyphenylbenzotriazolic UV absorber and HALS in the range of 350 to 400nm. The least YID, LID and CD in the coated woods of Larix leptolepis appeared at the addition level of 3%, based on non-volatile content, in hydroxybenzophenolic and hydroxyphenylbenzotriazolic UV absorber, and of 1.5% in HALS to water-soluble acrylic resin.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.667-670
• /
• 2005

Ground control points(GCPs) can be extracted from SAR data given precise orbit for DTM generation using optic images and other SAR data. In this study, we extract GCPs from ERS SAR data and SRTM DEM. Although it is very difficult to identify GCPs in ERS SAR image, the geometry of optic image and other SAR data are able to be corrected and more precise DTM can be constructed from stereo optic images. Twenty GCPs were obtained from the ERS SAR data with precise Delft orbit information. After the correction was applied, the mean values of planimetric distance errors of the GCPs were 3.7m, 12.1 and -0.8m with standard deviations of 19.9m, 18.1, and 7.8m in geocentric X, Y, and Z coordinates, respectively. The geometries of SPOT stereo pair were corrected by 13 GCPs, and r.m.s. errors were 405m, 705m and 8.6m in northing, easting and height direction, respectively. And the geometries of RADARS AT stereo pair were corrected by 12 GCPs, and r.m.s. errors were 804m, 7.9m and 6.9m in northing, easting and height direction, respectively. DTMs, through a method of area based matching with pyramid images, were generated by SPOT stereo images and RADARS AT stereo images. Comparison between points of the obtained DTMs and points estimated from a national 1 :5,000 digital map was performed. For DTM by SPOT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. For DTM by RADARSAT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. These results met the accuracy of DTED level 2

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1125-1125
• /
• 2001

Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.753-756
• /
• 1991

This paper aimed to analyse dose sensitivity to the controllable parameters of in-door radon $(^{222}Rn)$ and its decay products(Rn-D) by applying the input-output linear system theory. Physical behaviors of $^{222}Rn$ & Rn-D were analyzed in terms of $^{222}Rn$ gas generation, -migation and - infiltration to indoor environments, and the performance output-function(i.e. mean dose equivalent to Tracho-Bronchial(TB) lung region was assessed to the following ranges of the controllable parameters; a) the ventilation rate constant $({\lambda}_v)$ : $0{\sun}500[h^{-1}]$. b) the attachment rate constant$({\lambda}_a)$ : 0-500 $[h^{-1}]$. c) deposition rate constant $({\lambda}{_{d}^{u}})$: 0-50$[h^{-1}]$. A linear input-output model was reconstructed from the original models in literatures, as follows, which was modified into the matrices consisting of 111 nodal equations. a) indoor ${222}Rn$ & Rn-D Behaviour: jacobi- Porstendorfer- Bruno model. b) lung dosimerty : Jacobi-Eisfeld model. Some of the major findings, which identify the effectiveness of this model, were as follows. a) ${\lambda}_v$ is most effective, dominant controllable parameters in dose reduction, if mechanical ventilation is applied. b) ${\lambda}_v$, depending on the air particle-concentration, reduces the dose somewhat within ${\lambda}_v$<1 $h^{-1}R range. However, the dose increases conversely, ${\lambda}_v$>1 $h^{-1}R range range. c) ${\lambda}{_{d}^{4}}$ reduces the dose linearly as ${\lambda}_v$ dose. Such dose(z-axis) sentivities are shown with three-dimensional plots whoes x,y-axes are combined 2out the 3 parameter${\lambda}_v{\lambda}_s,\;{\lambda}_d^s$.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.83-97
• /
• 2014

This paper presents the results of an investigation aimed at developing reinforced concrete beams consisting of precast permanent U-shaped reinforced mortar forms filled with different types of core materials to be used as a viable alternative to the conventional reinforced concrete beam. To accomplish this objective, an experimental program was conducted and theoretical model was adopted. The experimental program comprised casting and testing of thirty beams of total dimensions $300{\times}150{\times}2,000mm$ consisting of permanent precast U-shaped reinforced mortar forms of thickness 25 mm filled with the core material. Three additional typical reinforced concrete beams of the same total dimensions were also cast to serve as control specimens. Two types of single-layer and double-layers steel meshes were used to reinforce the permanent U-shaped forms; namely welded wire mesh and X8 expanded steel mesh. Three types of core materials were investigated: conventional concrete, autoclaved aerated lightweight concrete brick, and recycled concrete. Two types of shear connections between the precast permanent reinforced mortar form and the core material were investigated namely; adhesive bonding layer between the two surfaces, and mechanical shear connectors. The test specimens were tested as simple beams under three-point loadings on a span of 1,800 mm. The behavior of the beams incorporating the permanent forms was compared to that of the control beams. The experimental results showed that better crack resistance, high serviceability and ultimate loads, and good energy absorption could be achieved by using the proposed beams which verifies the validity of using the proposed system. The theoretical results compared well with the experimental ones.