• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.144.1-144
• /
• 2003

• 한국재료학회지
• /
• 제32권10호
• /
• pp.425-428
• /
• 2022

In this study, Y₃Al₅O₁₂:Eu³⁺ red phosphors were synthesized at different temperatures using a solid state reaction method. The crystal structures, surface and optical properties of the Y₃Al₅O₁₂:Eu³⁺ red phosphors were investigated using X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and photoluminescence (PL) analyses. From XRD results, the crystal structure of the Y₃Al₅O₁₂:Eu³⁺ red phosphors was determined to be cubic. The maximum emission spectra were observed for the Y₃Al₅O₁₂:Eu³⁺ red phosphor prepared by annealing for 4h at 1,700 ℃. The 565~590 nm photoluminescent spectra of the Y₃Al₅O₁₂:Eu³⁺ red phosphors is associated with the ⁵D₀ → ⁷F₂ magnetic dipole transition of the Eu³⁺ ions. The intensity of the photoluminescent spectra in the red phosphors is more dominant for the magnetic dipole transition than the electric dipole transition with increasing annealing temperature. The International Commission on Illumination (CIE) coordinates of Y₃Al₅O₁₂:Eu³⁺ red phosphors prepared by 1,700 ℃ annealing temperature are X = 0.5994, Y = 0.3647.

• 대한화학회지
• /
• 제46권4호
• /
• pp.336-345
• /
• 2002

본 연구에서는 조합화학을 이용하여 $CaO-Gd_2O_3-Al_2O_3$계에서 $Eu^{3+}$와 $Tb^{3+}$활성 적색 및 녹색 PDP용 형광체를 탐색하였으며 탐색된 형광체의 합성온도, 최적조성,발광 특성 등을 조사하였다. $CaO-Gd_2O_3-Al_2O_3$의 삼성분계의 형광특성 라이브러리를 작성하기 위하여 210개의 다른 조성을 가진 시료를 고분자 착체 중합법으로 합성하였다. 합성된 형광체 분말을 VUV PL로 측정하여 형광 특성 라이브러리를 작성하였고 발광특성이 잘 나타난 시료를 XPD를 이용하여 결정 구조를 확인하였다. 적색 형광체로서 탐색된 $Ca_{\alpha}$G$d_{0.95-\alpha-\beta}$$Al_\beta$$O_\delta$ : Eu(0.02< $\alpha+\beta$ <0.04)형광체는 색순도 면에서 상용형광체보다 개선된 특성을 보였으며 녹색 형광체로서 탐색된 $CaGdAl_3O_7$ : Tb, Ca$Al_{12}$$O_{19}$ : Tb, $Gd_4Al_2$$O_9$ : Tb, $Gd_3Al_5$$O_{12}$ : Tb 형광체 중에서 $CaGdAl_3O_7$ : Tb, Ca$Al_{12}$$O_{19}$ : Tb형광체는 상용 형광체에 비해 잔광시간이 짧은 특성을 보였다

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2477-2480
• /
• 2007

MgAl2O4:Eu3+ red-light emitting powder phosphor was prepared at temperature as low as 500 oC within a few minutes by using the combustion route. The prepared powder was characterized by X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectrometry. The luminescence of Eu3+-activated MgAl2O4 shows a strong red emission dominant peak around 611 nm, which can be attributed to the 5D0-7F2 transition of Eu3+ ions from the synthesized phosphor particles under excitation (394 nm). Electron paramagnetic resonance (EPR) measurements at the X-band showed that no signal could be attributed to Eu2+ ions in MgAl2O4.

• 한국재료학회지
• /
• 제14권12호
• /
• pp.885-888
• /
• 2004

$BaMgAl_{10}O_{17}:Eu^{2+}$ for PDP blue phosphor was synthesized using SHS(Self-propagating High temperature Synthesis) method. While Al metal powder was oxidized in this combustion, $Eu_{2}O_3$ was reduced to Eu2+. Therefore the mole ratio of $Al/Al_{2}O_3$ is one of the most important variable of the reaction. When $Al/Al_{2}O_3$ is 2.5/3.75, it has not only appropriate temperature and reaction velocity, but also excellent luminescent property. The sample synthesized in this system has similar characteristics comparing to sample using conventional solid-state reaction.

• 소성∙가공
• /
• 제12권5호
• /
• pp.493-497
• /
• 2003

The present investigation aims at visualizing the crack tip stress field using a mechanoluminescence material. The well known compound $SrAl_2O_4$:$Eu^{2+}$ was adopted as a mechanolurninescence material. Two more trivalent rare-earth elements such as Dy and Nd were taken into consideration as codopants to provide the appropriate trap levels. Samples of a variety of compositions were prepared by varing $Eu^{2+}$, $Dy^{3+}$, and $Nd^{3+}$ doping contents, for which the combinatorial chemistry method was used. In order to search for the optimum composition for the highest mechanoluminescence, the luminescence induced by a compressive device including a CCD camera. In parallel, a compact tension specimen was prepared by mixing the luminescence powders of optimum composition and epoxy resin. Crack initiation from the mechanically machined sharp note tip and its growth during loading were found to be associated with the extent of light emission from $SrAl_2O_4$.

• 마이크로전자및패키징학회지
• /
• 제19권2호
• /
• pp.41-45
• /
• 2012

백색 LED용 산질화물계 녹색발광 형광체를 합성하고, 광특성을 분석하였다. $SrSi_2O_{2-{\delta}}N_{2+2/3{\delta}}:Eu^{2+}$의 조성을 갖는 $SrSi_2O_2N_2:Eu^{2+}$ 경우 합성조건에 따라서 N/O비 ($\delta$)가 변하고 있었다. 수소 분위기로 $1700^{\circ}C $에서 합성된 시편이 Eu의 농도가 5 mol%일 때 $Eu^{2+}$의 $5d{\rightarrow}4f$ 전이에 의한 545 nm 근처에서의 가장 높은 녹색 발광강도를 얻을 수 있었다. $Ca_{0.5m-0.005}Yb_{0.005}Si_{12-(m+n)}Al_{m+n}O_nN_{16-n}$의 조성을 갖는 $Ca-{\alpha}-SiAlON:Yb^{2+}$는 m = 3 (n = 0.15)에서 잘 발달된 결정성과 균일한 크기를 갖는 입자를 얻을 수 있었고, 이 것이 550 nm 근처에서 가장 높은 녹색 발광을 하고 있었다.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.10-15
• /
• 2006

Photoluminescence (PL) and crystal structures of the $(l-x)CaWO_4-xLi_2WO_4$ binary system added with $Eu_2O_3$ activator have been characterized. The $CaWO_4\;and\;Li_2WO_4$ have the scheelite and phenakite structures respectively. The $CaWO_4-Li_2WO_4-Eu_2O_3$ phosphors show the red luminescence of 613 nm peak wavelength. The wavelength range of excitation spectral band is $380\~470$ nm with the peak wavelength of 397 nm. The $0.88(0.5CaWO_4-0.5Li_2WO_4)-0.12Eu_2O_3$ showed the most superior luminescence characteristics. The effect of co-doping elements such as $Al_2O_3$ and rare-earth oxides on PL has been characterized. The co-doping elements deteriorated the luminescence intensity except the $Al_2O_3$ and $Gd_2O_3$. The PL characteristics of $CaWO_4-Li_2WO_4-Eu_2O_3$ phosphors have been compared to those of the alkali europium double molybdates (tungstates) of scheelite-related structure such as $LiEu(MoO_4)_2$ and $CsEu(MoO_4)_2$. The crystal structures of $(l-y)[(l-x)CaWO_4-xLi_2WO_4]-yEu_2O_3$ phosphors have been characterized using XRD data and rietveld refinement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.406-407
• /
• 2008

For this study, Yttrium aluminum garnet (YAG) particles doped $Eu^{3+}$ ions were prepared via the combustion process using the 1:1 ratio of metal ions to reagents. The characteristics of the synthesized nano powder were investigated by means of X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and photoluminescence (PL). The various YAG peaks, with the (420) main peak, appeared at all sintering temperature XRD patterns. The YAG phase crystallized with results that are in good agreement with the JCPDS diffraction file 33-0040. The SEM image showed that the resulting YAG:Eu powders had larger sizes with the increse in the sintering temperature. The grain size was about 50nm at $1000^{\circ}C$. The PL intensity of $Eu^{3+}$ has the line peaks of 598, 610, 632nm and has main peak at 591nm.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.211-217
• /
• 2015

To fabricate white LED having a high color rendering index value, red color phosphor mixed with the green color phosphor together in the blue chip, namely the blue chips with RG phosphors packaging is most favorable for high power white LEDs. In our previous papers, we reported on successful syntheses of $Sr_{2-}$ $Si_5N_8:Eu^{2+}$ and $CaAlSiN_3$ phosphors for red phosphor. In this work, for high power green phosphor, greenemitting ternary nitride $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphor was synthesized in a high frequency induction furnace under $N_2$ gas atmosphere at temperatures up to $1400^{\circ}C$ using $EuF_3$ as a raw material for $Eu^{2+}$ dopant. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 250 - 500 nm, namely from UV to blue region with distinct enhanced emission spectrum peaking at ${\approx}530nm$.