• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.50-53
• /
• 2002

YMnO$_3$ thin films were spun-coated on the Pt/Ti/SiO$_2$/Si substrates by sol-gel process using alkoxides, and then dried on hot plates from 300 to 450 $^{\circ}C$. The prepared YMnO$_3$ thin films were annealed at 850 $^{\circ}C$ in O$_2$ atmosphere for 1 h. The crystallization of YMnO$_3$ thin films were improved to preferred c-axis orientation and the dielectric characteristics were progressed by increasing the drying temperature. The range of dielectric constant of thin film dried at 450 $^{\circ}C$ is 12.9-22.3 and close to that of YMnO$_3$ single crystal. The ferroelecrtic property of YMnO$_3$ thin film was observed on the YMnO$_3$ films. The maximum remnant polarization (2Pr) of YMnO$_3$ thin films dried at 450 $^{\circ}C$ was about 2.91 ${\mu}$ C/cm2. It was suggested that the drying temperature affect to the initial stage of thin film growth of preferred c-axis orientation.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.93-98
• /
• 2001

YMnO$_3$ films are excellent gate dielectric materials of ferroelectric random access memories (FRAMs) with MFSFET (metal -ferroelectric-semiconductor field effect transistor) structure because YMnO$_3$ films can be deposited directly on Si substrate and have a relatively low permittivity. Although the patterning of YMnO$_3$ thin films is the requisite for the fabrication of FRAMs, the etch mechanism of YMnO$_3$ thin films has not been reported. In this study, YMnO$_3$thin films were etched with Cl$_2$/Ar gas chemistries in inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$ film is 285$\AA$/min under Cl$_2$/(Cl$_2$+Ar) of 1.0, RF power of 600 W, dc-bias voltage of -200V, chamber pressure of 15 mTorr and substrate temperature of $25^{\circ}C$. The selectivities of YMnO$_3$ over CeO$_2$ and $Y_2$O$_3$ are 2.85, 1.72, respectively. The selectivities of YMnO$_3$ over PR and Pt are quite low. Chemical reaction in surface of the etched YMnO$_3$ thin films was investigated with X-ray photoelectron spectroscopy (XPS) surface of the selected YMnO$_3$ thin films was investigated with X-ray photoelectron spectroscopy(XPS) and secondary ion mass spectrometry (SIMS). The etch profile was also investigated by scaning electron microscopy(SEM)

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.665-672
• /
• 2000

The ferroelectric YMnO3 thin films were prepared by MOD(metal-organic decomposition) method with Y- and Mn-acetylacetonate as starting materials. Thin films were grown on various substrates by spin-coating technique. The crystalline phases of the thin films were identified by X-ray diffractometer as a function of heat-treatment temperature, pH of coating solution and substrate. In addition, the effect of Mn/Y molar ratio(0.8~1.2) on the formation of hexagonal-YMnO3 phase was investigated. In forming highly c-axisoriented hexagonal-YMnO3 single phase, the Pt coated Si substrate was more effective than the bare Si substrate, and the optimum heat-treatment condition was at 82$0^{\circ}C$ for 30 min. Higher Mn/Y molar ratio within 0.8~1.2 and pH of YMnO3 precursor solution within 0.5~2.5 favored formation of ferroelectric hexagonal phase rather than orthorhombic phase. Leakage current density of the hexagonal-YMnO3 thin film formed on Pt(111)/TiO2/SiO2/Si substrate was low enough as 0.4~4.0$\times$10-8(A/$\textrm{cm}^2$) at 5 V and its remanent polarization(Pr), calculated from the P-E hysteresis loop, was 3 nC/$\textrm{cm}^2$.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.511-516
• /
• 2002

$Y(NO_3)_3{\cdot}5H_2O$ 과 $Mn(CH_3CO_2)_2{\cdot}4H_2O$를 출발물질로 하여 졸-겔(sol-gel)법으로 Si(100) 기판위에 육방정계의 $YMnO_3$ 박막을 제조하였다. $YMnO_3$ 박막의 열처리 온도변화, 가수분해시 가수의 양(Rw)과 촉매제의 첨가에 따른 결정 구조 및 전기적 특성을 조사하였다. $YMnO_3$ 박막의 결정화는 700${\circ}C$부터 시작되었고 완전한 결정화는 800${\circ}C$-1시간 열처리하여 이루어 졌으며, $YMnO_3$ 박막의 가수의 양 Rw=6일때 육방정계 $YMnO_3$상의 c-축 (0001) 우선 배향성을 나타내었고, Rw=1 과 Rw=12인 경우에는 Rw=6인 경우보다 c-축 배향성은 감소하였다. 산성이나 염기성 촉매제 첨가에 따라 $YMnO_3$ 박막의 결정성 및 우선 배향성은 영향을 받아 c-축 우선 배향성은 감소하고 사방정계의 $YMnO_3$ 상을 형성하였다. Rw=6일 때 $YMnO_3$박막은 0.2V인가 전압에서 $1.2{\times}10-8 A/cm^2$으로 우수한 누설 전류 밀도를 나타내었고 누설 전류 밀도는 인가 전압에 따라 크게 변하지 않았다.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.168-173
• /
• 2000

YMnO3 thin films were prepared on Pt/Ti/SiO2/Si substrate by chemical solution deposition method. The films were crystallized by heat-treatment at 85$0^{\circ}C$ for 1 hour. Effects of an annealing atmosphere(O2, Ar, vacuum) on the crystallization behavior and electridcal properties were investigated. YMnO3 thin films annealed under Ar atmosphere showed a superior crystallinity and a very strong c-aix preferred-orientation which was a polar axis. Leakage current density of the films decreased with lowering oxygen partial pressure of the annealing atmosphere. C-V and P-E ferroelectric hysteresis were observed only in the thin film heat-treated under Ar atmosphere.In order to prepare YMnO3 thin films having both low leakage current and ferroelectricity, the annealing atmsphere should be kept under a proper oxygen partial pressure which was about 1 Pa in this work. Leakage current density at 1 volt, dielectric constant($\varepsilon$r), remanent polarization(Pr), and coercive field(Ec) were 1.7$\times$10-8 A/$\textrm{cm}^2$, 25, 1.08$\mu$C/$\textrm{cm}^2$, and 100 kV/cm, respectively.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권1호
• /
• pp.6-10
• /
• 2000

Ferroelectric YMnO$_3$ thin films were deposited on $Y_2$O$_3$/si(100) substrates by metalorganic chemical vapor deposition. The YMnO$_3$ thin films annealed in vacuum ambient (100 mTorr) above 75$0^{\circ}C$ show hexagonal structured YMnO$_3$. However, the film annealed in oxygen ambient shows poor crystallinity, and the second phase as $Y_2$O$_3$ and orthorhombic-YMnO$_3$ were shown. The annealing ambient and pressure on the crystallinity of YMnO$_3$ thin films is very important. The C-V characteristics have a hysteresis curve with a clockwise rotation, which indicates ferroelectric polarization switching behavior. When the gate voltage sweeps from +5 to 5 V, the memory window of the Pt/YMnO$_3$/Y$_2$O$_3$/Si gate capacitor annealed at 85$0^{\circ}C$ is 1.8 V. The typical leakage current densities of the films annealed in oxygen and vacuum ambient are about 10$^{-3}$ and 10$^{-7}$ A/cm$^2$ at applied voltage of 5 V.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.21-24
• /
• 2000

Ferroelectric YMnO$_3$thin films are excellent dielectric materials for high integrated ferroelectric random access memory (FRAM) with metal-ferroelectric-silicon field effect transistor (MFSFET) structure. In this study, YMnO$_3$thin films were etched with Cl$_2$/Ar gas chemistries in inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$thin films is 285 $\AA$/min under Cl$_2$/Ar of 10/0, 600 W/-200 V and 15 mTorr. The selectivities of YMnO$_3$over CeO$_2$and $Y_2$O$_3$are 2.85, 1.72, respectively. The results of x-ray photoelectron spectroscopy (XPS) reflect that Y is removed dominantly by chemical reaction between Y and Cl, while Mn is removed more effective by Ar ion bombardment than chemical reaction. The results of secondary ion mass spectrometer (SIMS) were equal to these of XPS. The etch profile of the etched YMnO$_3$film is approximately 65$^{\circ}$and free of residues at the sidewall.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.213-216
• /
• 2001

Etching behaviors of ferroelectric YMn $O_3$ thin films were studied by an inductively coupled plasma (ICP). Etch characteristic on ferroelectric YMn $O_3$ thin film have been investigated in terms of etch rate, selectivity and etch profile. The maximum etch rate of YMn $O_3$ thin film is 300 $\AA$/min at Ar/C $l_2$ of 2/8, RF power of 800W, dc bias voltage of 200V, chamber pressure of 15mTorr and substrate temperature of 3$0^{\circ}C$. Addition of C $F_4$ gas decrease the etch rate of YMn $O_3$ thin film. From the results of XPS analysis, Y $F_{X}$ compunds were found on the surface of YMn $O_3$ thin film which is etched in Ar/C1/C $F_4$ plasma. The etch profile of YMn $O_3$ film is improved by addition of C $F_4$ gas into the Ar/C $l_2$ plasma. These results suggest that fluoride yttrium acts as a sidewall passivants which reduce the sticking coefficient of chlorine on YMn $O_3$.>.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.21-24
• /
• 2000

Ferroelectric YMnO$_3$ thin films are excellent dielectric materials for high integrated ferroelectric random access memory (FRAM) with metal-ferroelectric-silicon field effect transistor (MFSFET) structure. In this study, YMnO$_3$ thin films were etched with C1$_2$/Ar gas chemistries in inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$ thin films is 285 $\AA$/min under C1$_2$/Ar of 10/0, 600 W/-200 V and 15 mTorr. The selectivities of YMnO$_3$ over CeO$_2$ and $Y_2$O$_3$ are 2.85, 1.72, respectively. The results of x-ray photoelectron spectroscopy (XPS) reflect that Y is removed dominantly by chemical reaction between Y and Cl, while Mn is removed more effective by Ar ion bombardment than chemical reaction. The results of secondary ion mass spectrometer (SIMS) were equal to these of XPS. The etch profile of the etched YMnO$_3$ film is approximately 65$^{\circ}$and free of residues at the sidewall.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.12-16
• /
• 2001

We investigated the etching characteristics of $YMnO_3$ thin films in high-density plasma etching system. In this study. $YMnO_3$ thin films were etched with $CF_{4}/Ar$ gas chemistries in inductively coupled plasma (ICP). Etch rates of $YMnO_3$ were measured according to gas mixing ratios. The maximum etch rate of $YMnO_3$ is 18 nm/min at $CF_{4}/(CF_{4}+Ar)$ of 20%. In optical emission spectroscopy (OES) analysis, F radical and Ar* ions in plasma at various gas chemistries decreased with increasing $CF_4$ content. Chemical states of $YMnO_3$ films exposed in plasma were investigated with x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). There is a chemical reaction between metal (Y, Mn) and F and metal-fluorides were removed effectively by Ar ion sputtering. $YF_x$, $MnF_x$ such as YF, $YF_2$, $YF_3$ and $MnF_3$ Were detected using SIMS analysis. The etch slope is about $65^{\circ}C$ and free of residues.