• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.324-330
• /
• 1996

We examined the formal oxidation states of Pb and Cu in the Pb2CuO4 slab of Pb2Sr2ACu3O8(A=Y1-xCaxor Nd1-xSrx) and their possible changes by oxygen incorporation in the Cu layer of the slab by performing tight-binding band electronic structure calculations on the Pb2CuO4+δ slab. Our results show that the most likely oxidation state of Pb is +2 and that of Cu is +1 for the Pb2CuO4 slab prior to oxidation. With small δ values, the oxygen incorporation occurs by the formation of such chain fragments as in YBa2Cu3O7-y along the a+b axis. The four-coordinate Cu atoms in the chain fragments are in the +3 oxidation states. For values of δ larger than 0.5, however, an additional oxygen (Oad) goes to the site along the b axis to form short Pb-Oad distances oxidizing Pb2+ to Pb4+. This change in the Pb oxidation state leads to the suppression of superconductivity due to the decrease of holes in the CuO2 layer.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.63-63
• /
• 2008

• 대한전자공학회논문지TC
• /
• 제42권7호
• /
• pp.63-70
• /
• 2005

위상잡음(phase noise)이 작은 발진기(oscillator)는 주파수 대역의 효율적 활용과 고속의 데이터 전송을 가능하게 하는 통신 시스템의 구축과 Doppler 효과를 이용하는 RADAR의 제작을 위한 핵심소자로서 발진기의 위상잡음은 공진부의 loaded Q($Q_{L}$)값이 클수록 작아진다. 본 논문에서는 고온초전도 $YBa_2Cu_3O_{7-\delta}$(YBCO) 박막을 사용하여 $TE_{011}$ 모드 고온초전도 YBCO-루타일 공진기를 제작하고 이 공진기가 공진단으로 사용된 발진기 특성의 시뮬레이션, 발진기 제작 및 위상잡음 측정 연구를 수행하였다. 23.5 K 및 $TE_{01\delta}$ 모드 공진주파수인 8.545 GHz에서 $Q_{L}$=180000 인 고온초전도 YBCO-루타일 공진기를 사용하여 제작된 발진기의 위상잡음은 1 KHz offset에서 -104.8 dBc/Hz 정도의 매우 작은 값을 지님을 확인하였다. Piezoactuator를 이용한 상온에서의 발진기 주파수의 튜닝 결과를 제시하고, 이러한 공진기가 사용된, 튜닝 가능한 고성능 발진기의 제작 가능성에 대해 논의하였다.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.147-150
• /
• 2020

Relatively pure YBCO was first synthesized by heating a mixture of metal carbonates at temperatures between 1,000 and 1,300 K, resulting in the reaction: 4BaCO₃+Y₂(CO₃)₃+6CuCO₃+(1/2_-x)O₂ → 2YBa₂Cu₃O_7-x+1/3CO₂. Modern syntheses of YBCO use the corresponding oxides and nitrates. The superconducting properties of YBa₂Cu₃O_7-x are sensitive to the value of x, i.e., its oxygen content. Only those materials with 0≤x≤0.65 are superconducting below Tc, and when x ~ 0.07, the material superconducts at the highest temperature, i.e., 95 K, or in the highest magnetic fields, i.e., 120 T and 250 T when B is perpendicular and parallel to the CuO₂ planes, respectively. In addition to being sensitive to the stoichiometry of oxygen, the properties of YBCO are influenced by the crystallization methods applied. YBCO is a crystalline material, and the best superconductive properties are obtained when crystal grain boundaries are aligned by careful control of annealing and quenching temperature rates. However, these alternative methods still require careful sintering to produce a quality product. New possibilities have arisen since the discovery of trifluoroacetic acid, a source of fluorine that prevents the formation of undesired barium carbonate (BaCO₃). This route lowers the temperature necessary to obtain the correct phase at around 700℃. This, together with the lack of dependence on vacuum, makes this method a very promising way to achieve a scalable YBCO bulk.

• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.146-150
• /
• 2000

Step edge Josephson junctions in c-axis oriented $YBa_2Cu_3O_7$ films were fabricated on $CeO_2$ buffered sapphire substrates. The step angle was controlled in the wide range of $20^{\circ}\sim75^{\circ}$ by the Ar ion milling technique. I-V curves of junction fabricated on the thickness ratio of $\sim$0.8 and the step angle of $35^{\circ}$ were exhibited RSJ-like behavior with $I_CR_N$ product of $\sim250{\mu}A$ and critical current density of $\sim2\times10^4A/cm^2$ at 77 K. Critical current of step edge junction was increased linearly with decreasing temperature but the normal resistance was almost constant. Total samples of step edge Josephson junction was satisfied a scaling behavior of $I_CR_N{\propto}(J_C)^{0.5}$.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.109-113
• /
• 2003

We have developed a planar-type single layer second-order $high-T_{c}$ SQUID gradiometer, which can detect the $d^2$$B_{z/}$dxdy of the second-order field gradient. This SQUID gradiometer consists of four-way 'clover-leaf' pick-up loops and is coupled directly to a 4-junction dc SQUID in such a way that the coupling polarity of the two diagonal loops is opposite to that of the other two loops. The pickup loops are intrinsically balanced for both uniform field and the 1 st-order field gradient. The $YBa_2$$Cu_3$$O_{7}$ thin film was made by pulsed laser deposition method on $SrTiO_3$ single crystal substrate and patterned by photolithography with Ar ion milling technique. Response of this gradiometer was tested for both uniform field and the 2nd-order field gradient. Details of the design, fabrication, and results will be discussed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권3호
• /
• pp.27-31
• /
• 2019

Large grain YBCO bulk superconductors are fabricated by the top-seeded melt growth (TSMG) or top-seeded infiltration growth (TSIG) method. Both growth methods use at least one of $YBa_2Cu_3O_{7-{\delta}}$, $Y_2BaCuO_5$, $BaCuO_3$ pre-reacted precursor powders. However, the synthesis of the pre-reacted powders includes multiple calcination runs which are cost-bearing and time-consuming. In this work, we report the successful growth of single-domain YBCO bulk superconductors directly by using the powder compact that has been pressed from the mixture of $Y_2O_3$, $BaCuO_3$ and CuO powders without any intermediate grinding step. Single-domain YBCO bulk superconductor has been also prepared by using $Y_2O_3$, $BaO_2$ and CuO powders without intermediate grinding step. Investigations on the trapped magnetic field and microstructure of the melt-processed specimen show that the elimination of the repeated processes of calcinations and pulverization has hardly affected on the crystal growth and the magnetic properties of the grown YBCO bulk superconductors. However, it is thought that the presence of residual carbon affects on the size of Y211 particles in melt-processed YBCO bulk superconductor.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2009년도 Korea Superconductivity Society Meeting 2009
• /
• pp.37-37
• /
• 2009

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.6-12
• /
• 2008

[ $YBa_2Cu_3O_{7-y}$ ](123) powders were synthesized by the solid state reaction method using two different purity $BaCO_3$ powders (99.75% and 99.7% purity) and $Y_2O_3$ (99.9%) and CuO (99.9%) powders. The effect of $BaCO_3$ purity on the formation of a 123 phase and the superconducting properties were investigated. The mixtures of raw powders were calcined at temperature ranges of $800^{\circ}C-880^{\circ}C$ in air and finally made into a single grain samples by a melt processing with top seeding. It was found that a 123 phase was well formed at temperature above $870^{\circ}C$, but the purity effect on the 123 formation was negligible. The single-grain 123 samples prepared from the different $BaCO_3$ powders showed the same $T_c$ value of 90.5 K and similar $J_c$ values about $10^4\;A/cm^2$ at 0 T and 77 K, and $10^3\;A/cm^2$ at 2 T and 77 K. This result indicates that the low purity, cheap price $BaCO_3$ powder can be used as a raw material for the fabrication of single-grain, high-$J_c$ superconducting levitator.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.57-57
• /
• 2006