• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.197-197
• /
• 2010

본 연구에서는 RF/DC dual 마그네트론 스퍼터 시스템을 이용하여 Glass 기판 상에 유기태양전지용 Nb-doped $TiO_2$ (NTO)/Ag/NTO 다층 투명전극을 성막하고 이 다층 투명전극을 $200^{\circ}C{\sim}700^{\circ}C$ 온도 범위에서 급속 열처리 (Rapid Thermal Annealing ; RTA)를 통하여 전기적, 광학적, 구조적 및 표면의 특성 변화를 연구하였다. Hall effect measurement, UV-Vis spectrometer, FESEM 분석을 통하여 다층투명전극의 전기적, 광학적, 표면분석을 하였고 Synchrotron 분석을 통하여 온도에 따른 구조변화를 분석하였다. 상온에서 성막된 다층투명전극은 30nm 두께의 NTO 박막 사이에 얇은 9nm의 얇은 Ag 층을 삽입한 구조로써 10ohm/square 이하의 매우 낮은 면저항과 ${\sim}10^{-5}\;ohm-cm$ 의 비저항, Anti-reflection 효과에 의해 85% 이상의 높은 광투과성을 나타내었다. RTA 온도가 증가함에 따라 전기적, 광학적 특성은 약간 향상되었고 비정질 구조를 유지함을 알 수 있었다. 그러나 높은 온도범위에서는 비정질 구조에서 Anatase 상으로 결정구조가 변화함을 알 수 있었고 전기적, 광학적 특성이 감소됨을 알 수 있었다. NTO/Ag/NTO 다층 투명전극을 유기태양전의 Anode로 적용하여 특성을 비교한 결과 RTA 온도가 증가함에 따라 유기태양전지의 효율 또한 증가하였고 최적화된 온도 조건에서 2.49% 의 높은 효율을 얻을 수 있었다. 이를 통해 우수한 특성을 나타내는 NTO/Ag/NTO 다층투명전극이 기존의 디스플레이 및 태양전지 등의 투명전극 재료로 주로 사용되어 온 ITO (Indium Tin Oxide) 를 대체 할 수 있는 재료로써의 가능성을 제시하였다.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.331-337
• /
• 2019

Titania has become the most applicable material for photocatalytic application. Nevertheless, titania has the weak point in its wide band gap energy that is mainly activated by UV irradiation. There have been vast research challenges in order to make the wide band gap energy of titania narrow that could be activated in the presence of visible light. Various modifications of titania surface were popular because titania needs to change its surface to respond in visible light. Among the methodological approaches, N-doping to titania can be the alternative candidate because it is facile process and eco-friendly. The activated electron from valence band in N-doped $TiO_2$ migrates to conduction band in the presence of visible light irradiation, which shows photocatalytic activity as well. In this study, focused on the evaluation of nitrogen state after N-doping through brief review. Arguments are still existed in nitrogen states and their different effects on photocatalytic activity. In particular, two nitrogen states are generally reported; substitutional and interstitial states. The research articles regarding N-doped $TiO_2$ are continuously appearing because the potential application of water split in visible light is still fascinate. The future of N-doped $TiO_2$ is also presented by referrals based on various literature.

• Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.170-173
• /
• 2009

This study examined the special technique of photocatalytic degradation (RPODisk) for removal of taste and odor causing materials, algae, and algal toxin. The RPODisk was effective for removal of these troublesome contaminants. It outperformed the fixed media and the UV irradiation for geosmin removal. The RPODisk performance was comparable to the combination of the UV irradiation with TiO2. The RPODisk performance was affected by the rotating speed. The faster the speed was, the better the performance. The RPODisk was also effective for removal of algae and algal toxin. The algal activity reduced by 80% after 30 mins of the treatment. More toxic microcystin (MC)-LR was more difficult to remove than MC-RR. The times for 50% removal were 23.7 mins for MC-LR and 14.1 mins for MC-RR. Almost 100 mins of the contact time was required to completely remove MC-LR at the rotating speed of 260 rpm.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.65-71
• /
• 2016

In this study, Antimony Tin Oxide (ATO) ion storage layer and $TiO_2$ working electrode were fabricated using Nano Particle Deposition System. NPDS is the cutting-edge technology among the dry deposition methods. Accelerated particles are deposited on the substrate through the nozzle using NPDS. The thicknesses for coated layers were measured and layer's morphology was acquired using SEM. The fabricated electrochromic cell's transmittance was measured using UV-Visible spectrometer and power source at 630 nm. As a result, the integrated electrochromic/DSSC hybrid system was successfully fabricated as an energy harvesting system. The fabricated electrochromic cell was self-operated using DSSC as a power source. In conclusion, the electrochromic cell was operated for 500 cycles, with 49% of maximum transmittance change. Also the photovoltaic efficiency for DSSC was measured to be 2.55% while the electrochromic cell on the integrated system had resulted in 26% of maximum transmittance change.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.110-115
• /
• 2016

We prepared a working electrode (WE) coated with 0 ~ 50 nm-thick indium gallium zinc oxide(IGZO) by using RF sputtering to improve the energy conversion efficiency (ECE) of a dye sensitized solar cell (DSSC). Transmission electron microscope (TEM) and energy dispersive spectroscopy (EDS) were used to analyze the microstructure and composition of the IGZO layer. UV-VIS-NIR spectroscopy was used to determine the transparency of the WE with IGZO layers. A solar simulator and a potentiostat were used to confirm the photovoltaic properties of the DSSC with IGZO layer. From the results of the microstructural analysis, we were able to confirm the successful deposition of an amorphous IGZO layer with the expected thickness and composition. From the UV-VIS-NIR analysis, we were able to verify that the transparency decreased when the thickness of IGZO increased, while the transparency was over 90% for all thicknesses. The photovoltaic results show that the ECE became 4.30% with the IGZO layer compared to 3.93% without the IGZO layer. As the results show that electron mobility increased when an IGZO layer was coated on the $TiO_2$ layer, it is confirmed that the ECE of a DSSC can be enhanced by employing an appropriate thickness of IGZO on the $TiO_2$ layer.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.524-535
• /
• 2018

In this study, macroporous titania powders were synthesized utilizing the emulsion-assisted self-assembly to apply the removal of B. subtilis under UV irradiation, and the results were compared with the bactericidal effect of commercial titania nanoparticles. By changing the pore size of the porous titania powder, the reduction of B. subtilis by photocatalytic effect was measured, and the bactericidal capacity of the porous particles according to the pore size was compared in order to derive the optimum condition of the sterilization experiment. It was observed that the sterilization effect increased as the pore size became smaller, and it was confirmed that more than 50% of B. subtilis cold be removed for 1 hour of UV irradiation. Also, in order to promote the generation of active chemical species, a diluted solution of hydrogen peroxide was combined with the photocatalytic sterilization method, resulting in the removal of most of the strain after ultraviolet irradiation for 1 hour.

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.154-160
• /
• 2020

Background: Korean ginseng (Panax ginseng Meyer) powder is in rising demand because powder forms of foods are convenient to handle and are highly preservable. However, ginseng powder (GP) manufactured using the conventional process of air drying and dry milling suffers nutrient destruction and a lack of microbiological safety. The objective of this study was to prepare GP using a novel process comprised of UV-TiO₂ photocatalysis (UVTP) as a prewashing step, wet grinding, high hydrostatic pressure (HHP), and freeze-drying treatments. Methods: The effects of UVTP and HHP treatments on the microbial population, ginsenoside concentration, and physiological characteristics of GP were evaluated. Results: When UVTP for 10 min and HHP at 600 MPa for 5 min were combined, initial 4.95 log CFU/g-fw counts of total aerobes in fresh ginseng were reduced to lower than the detection limit. The levels of 7 major ginsenosides in UVTP-HHP-treated GP were significantly higher than in untreated control samples. Stronger inhibitory effects against inflammatory mediator production and antioxidant activity were observed in UVTP-HHP-treated GP than in untreated samples. There were also no significant differences in CIELAB color values of UVTP-HHP-treated GP compared with untreated control samples. Conclusion: Combined processing of UVTP and HHP increased ginsenoside levels and enhanced the microbiological safety and physiological activity of GP.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.6
• /
• pp.510-514
• /
• 2005

We have investigated the excitation-light source dependence of photo-catalytic efficiency for the benzene removal. The photo-catalytic module for the benzene removal is fabricated by a combination of GaN-based ultraviolet light-emitting diode (UV GaN-LED) and $TiO_2$ thin film coated on an aluminum plate. The benzene reduction rates of 365 nm and 375 nm modules at 60 mA junction current are approximately $8.95\;\%/Hr$ and $9.2\;\%/Hr$, respectively, which indicates that 365 nm GaN-LED is more effective than 375 nm GaN-LED. The benzene reduction efficiency is also noticeably dependent on the excitation wavelength and excitation-light power, as well as it is increased with the shorter wavelength and higher excitation power. This result exhibits that UV GaN-LED is useful to remove the volatile organic compounds (VOCs) existing in the environment.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.5
• /
• pp.280-284
• /
• 2015

Among many the oxynitrides, TiNO and AlCrNO, have diverse applications in different technological fields. We prepared TiNO/AlCrNO/Al thin films on aluminum substrates using the method of dc reactive magnetron sputtering. The reactive gas flow, gas mixture, and target potential were applied as the sputtering conditions during the deposition in order to control the chemical composition. The multi-layer films have been prepared in an Ar and O₂+N₂ gas mixture rate. The surface properties were estimated by performing scanning electron microscopy (SEM). At a wavelength range of 0.3~2.5 μm, the exact composition and optical properties of thin films were measured by Auger electron spectroscopy (AES) and Ultraviolet-visible-near infrared (UV-Vis-NIR) spectrophotometry. The optimal absorptance of multi-layer films was exhibited above 95.5% in the visible region of the electromagnetic spectrum, and the reflectance was achieved below 1.89%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.124.2-124.2
• /
• 2015

최근 에너지 효율을 향상시키고 감성과 기능성을 동시에 만족시킬 수 있는 스마트 윈도우 (Smart Window) 기술이 큰 주목을 받고 있다. 신개념의 하이브리드형 열선차단 코팅기술로 고투명, 고단열 등 복합기능을 가지고 있음. 4계절 변화가 뚜렷한 대한민국 실정에 가장 적합하여 건축물의 냉 난방 에너지를 최소화하는데 크게 기여할 것으로 기대된다. 단열필름 제조 방식에는 보급형 필름으로 염료 방식, 금속 방식 등이 있고 고성능 필름에는 나노 세라믹 방식과 스퍼터 방식+세라믹 방식을 융합한 필름(스퍼터 IR 필름)이 있다. 본 연구에서는 DC pulse sputter를 이용하여 고굴절율 물질인 TiO2와 저굴절률 물질인 SiO2를 적층으로 성장시켜 단열 스마트필름을 제작해 보았다. 높은 가시광 투과율과 IR 차페 성능을 확인하였고, 제작한 스마트필름을 또다른 윈도우 기술에 적용하는 연구를 진행하였다.