• 한국작물학회지
• /
• 제55권4호
• /
• pp.284-291
• /
• 2010

고 고형분함량 감자 생산을 위한 수확시기를 예측하는 데 있어 에너지 소모량의 추정에 대한 연구결과는 다음과 같다. 1. 각 지역별로 포장의 파종시기부터 수확시기까지 최근 5년간(2005년~2009년) 평균기온, 강수량, 상대습도, 일조시간, 바람, 지중온도 등의 농업환경을 조사한 결과 파종기 저온피해와 괴경비대기 장마기간을 회피한다면 가공용 원료감자는 가공품 생산에 필요시마다 물량을 수급하기 때문에 만숙재배를 하지 않아 품종의존도가 낮아 수확시기의 환경에 대한 비중이 큰 것으로 판단되었다. 2. 파종시기부터 출현까지에는 지중온도에 영향을 많이 받아 지역별 편차가 심해 시뮬레이션에서는 출현시기를 기준으로 감자의 수확적기를 예측하는 것이 바람직하였다. 3 수확시기를 예측하기 위한 생장모형은 $Tp=\frac{Tm{\cdot}Wm^{Tp}}{Wm^{Tm}}$를 사용하고, 생장량 Wm을 계상하는 기본 생장모형은 $Wm={\int}^m_tf(x)dt$를 사용하였다. 4. 기본 생장모형을 통해 Wm을 계상할 때는 광합성율(${\Delta}A$)과 식물체내 에너지 소모(${\Delta}E$) 개념을 적용해야 보다 정밀한 수확시기를 예측할 수 있었으며, 식물체내 에너지 소모에 대한 정의는 기후변화에 대응하여 농업환경에 대처하는 식물체내 에너지 소모를 계상하는 것으로 최근 5년간(2005년~2009년) 수확시기에 따라 고형분함량을 측정한 결과 광합성율만 계상할 때 보다 에너지 소모개념을 적용한 것이 효과적이었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• 대한치과보철학회지
• /
• 제44권3호
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• 대한전자공학회논문지
• /
• 제12권3호
• /
• pp.1-7
• /
• 1975

이 논문은 음성카셋트 Deck을 이용하여 고밀도로 data를 기록 또는 재생하는 한 방법을 검토하였다. 기록에 있어서는 NRZ-TM의 혼합에 의한 한 방식으로서 data를 정 및 부 bit로 분리하여 두개의 트랙에 각각 기록한다. 재생방법은 피이크. 쎈스에 의하여 검출신호의 레벨변동에 의한 정형, 펄스의 시간편차를 제거하고 오차의 정정이 자동적으로 이루어 지며 크럭. 펄스가 검출신호 자체에서 자동적으로 발생한다. 이 방식은 음성카셋트 Deck의 내부회로는 변경하기 않고 외부에 새로운 부착만으로서 음성과 data를 병용할 수 있다. Data펄스 25Hz-4KHz의 주파수까지 기록이 가능하고 최고 전송속도는 787(bps)이다.

• 한국대기환경학회지
• /
• 제22권4호
• /
• pp.405-420
• /
• 2006

This study was conducted to understand the change of spatial environmental factors including populations, air pollution source and land-use in Busan, during the period of 1995 and 2004. Firstly, the grids (5 km $\times$ 5 km) were divided using the TM coordinates of Busan and the statistical data of populations and land-use were marked on each grid during studying period. Secondly, the SO$_2$, NO$_2$ and O$_3$ concentrations of areas where air quality monitoring station was not established were estimated on the basis of these air pollutants measured at close air quality monitoring station by kriging method. In order to understand spatial change of air pollution and to investigate duplication and reduction of existing stations, semivariogram, correlation and cluster analysis were carried out. This study showed that the population increased in 2004 only on 8 grids compared to in 1995. The spatial change of SO$_2$, NO$_2$ and O$_3$ was investigated by semivariogram in Busan area. As the results of semivariogram, the spatial change of 502 become smaller and simpler, while that of NO2,03 become larger and more complex in 2004 than in 1995, According to the result of correlation and cluster analysis, the reduction of measurement item or the relocation of air quality monitoring station can be needed in the high dense grid area.

• 약학회지
• /
• 제42권4호
• /
• pp.447-458
• /
• 1998

Inhibitory activity of pesticide-preventing active carbon fiber mask on the penetrations in pesticide spray and its inhibitory effect on acute inhalation toxicity in rats were s tudied. Pesticides were sprayed into box ($1.O{\times}1.2{\tmies}O.6\;m$) at a dose of 20ml/min of diazinon ($Diatone^{TM}$) suspension (340ppm) and 5g/min of BPMC powder (2.0%) for 4 hours, and then captured the penetrated pesticides into water via mask in box under 8l/sec suction. The pesticides were analysed by A.O.A.C. method and GC/MS. Pesticide-preventing active carbon fiber mask significantly inhibited the penetration of diazinon by 93.4% as compared with control, and cotton mask and pesticide-preventing mask did it by 74.2% and 83.7%,respectively. This result shows that pesticide-preventing active carbon fiber mask has the most prominent inhibitory effect in preventing the penetration of diazinone. In the penetration of BPMC, all of three masks, such as active carbon fiber mask, cotton mask and pesticide-preventing mask, have a similar inhibitory effect, which were 99.3%, 98.6% and 97.0%, respectively. The penetrated pesticides via pesticide-preventmg active carbon fiber mask did not exert acute inhalation toxicity.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.133-140
• /
• 2008

이 실험의 목적은 Resilon으로 근관충전된 치아에서 자가산부식전처리제에 따른 치근단 미세누출을 평가하고자 함이다. 70개의 단근치를 사용하였고 .04 Taper ProFile을 사용하여 ISO #40까지 근관성형 하였다. 치아는 근관충전 재료와 자가산부식 전처리제에 따라서 15개씩 4개의 실험군과 5개씩 2개의 대조군으로 나누었다. 실험 치아는 치아 장축에 평행하게 잘라내어 염색액의 최대 침투 길이를 측정하였다. 통계분석은 One-way ANOVA test로 분석하였으며 Scheffe test로 사후검정 하였다. 실험결과 자가산부식전처리제를 사용한 2, 3, 4군 사이에서는 통계적으로 유의한 차이를 나타내지 않았다. 그러나 1군과 4군 사이에서는 통계적으로 유의한 차이가 나타났으며 (p < 0.05), 1군에서 가장 적은 치근단 미세누출을 나타냈다. 이 실험 결과에 따르면 Resilon으로 근관충전을 한 치아는 gutta percha와 $AH26^{(R)}$으로 근관충전한 치아와 비교했을 때 더 좋은 치근단 밀폐를 나타내지 않는다는 결론을 얻었으며, Resilon을 사용하여 근관충전을 한 경우에 자가산부식 전처리제의 차이에 따른 치근단 밀폐효과의 차이를 보이지 않는다는 결론을 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.785-788
• /
• 2005

In this study, micro-scale, high-performance, solenoid-type RF chip inductors were investigated. The size of the RF chip inductors fabricated in this work was $1.0{\times}0.5{\times}0.5mm^3$ The material and shape of the core were 96% $Al_2O_3$ and I-type. The material and number of turn of coil were copper (Cu) and 6. The diameter ($40{\mu}m$) of coil and length (0.35mm) of solenoid were determined by a Maxwell three-dimensional field simulator to maximize the performance of the inductors. High frequency characteristics of the inductance (L) and quality-factor (Q) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). The inductors developed have inductances of 10.8nH and quality factors of 25.2 at 250MHz, and show results comparable to those measured for the inductors prepared by CoilCraftTm that is one of the best chip inductor company in the world. The simulated data predicted the high-frequency data of the Land Q of the inductors developed well.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.30-39
• /
• 1994

To study the printing behaviors of Polyester and cotton(P/C) fabrics printed with disperse and reactive dyes, the effects of alkalis on the fixation of reactive dyes and the alkali-stability of disperse dyes in various methods of fixation were examined. The anthraquinone disperse dyes which have diamino derivatives as substituents without hydroxy group, such as C.I. Disperse Violet 1(D.V.1), C.I. Disperse Violet 28(D.V.28) and C.I.Disperse Blue 60(D.B.60) showed good results of fixation without regard to the concentration of NaHCO$_3$. In case of high temperature steaming(HTS) and unsaturated steaming(US)/HTS, D.V. 1 was alkali-stable and effective for P/C printing. A good result was obtained with D.V.1 and C.I.Reactive Orange 13(R.O.13) paste of 4% $K_{2}CO_{3}$. It was found that the unfixed D.V.28 bearing chloro group can hinder the fixation of monochlorotriaxinyl reactive dyes, and D.B.60 made little stain on 100% cotton. In thermosol(Tm), the dye uptake of D.V.1 was not decreased so much, but those of D.V.28 and D.B.60 were greatly decreased.

• 태양에너지
• /
• 제11권3호
• /
• pp.53-61
• /
• 1991

본 연구에서는 심야전력 및 폐열의 회수이용을 위한 잠열축열재를 개발하기 위하여, 상변화 온도가 $50{\sim}80^{\circ}C$의 범위에 있는 상변화 물질중 잠열량이 크고, 물성안정이 비교적 용이한 Octacosane($C_{28}H_{58}$)과 Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$)를 선택하여 상변화 온도의 변화특성과 물성안정방법 그리고 잠열특성을 분석하여 다음과 같은 결과를 얻었다. 1. 공업용 수준 Octacosane과 Sodium Acetate Trihydrate의 상변화 온도는 각각 $60.7^{\circ}C,\;57.4^{\circ}C$로서 시약용 수준에 비하여 Octacosane은 $1.1^{\circ}C$, Sodium Acetate Trihydrate는 $0.6^{\circ}C$ 낮았으며, 잠열량에 있어서는 Octacosane은 60.6kcal/kg으로 시약용 수준과 비슷한 값을 보였으나, Sodium Acetate Trihydrate는 51.1kcal/kg으로 시약용 수준에 비하여 5.4% 작은 값을 나타내었다. 2. Octacosane의 상변화 사이를 증가에 따른 잠열량을 분석한 결과, 초기에는 60.6kcal/kg이었으나, 시약용의 증가와 더불어 점차로 감소하여 200cycle에서 47.2kcal/kg이 되었고, 그 이후에는 거의 일정한 값을 유지하고 있는 것으로 보아 더 이상의 잠열량 감소는 없을 것으로 판단된다. 3. Sodium Acetate Trihydrate의 과냉현상을 제어하기 위한 조핵제로서 SPD(Sodium Pyrophosphate Decahydrate)를 3wt 이상 첨가하여 $25.7^{\circ}C$의 과냉도를 $1^{\circ}C$ 미만으로 줄였고, 증점제로서 CMC-Na를 3wt% 이상 첨가하여 상분리 현상을 해결하였으며, 안전성을 고려한 조핵제 및 중점제의 적정 첨가량은 4wt%였다. 4. UREA($NH_2CONH_2$)를 첨가하여 Sodium Acetate Trihydrate($CH_3COONa{\cdot}3H_2O$)의 상변화 온도를 $57.4^{\circ}C$에서 $46.2^{\circ}C$까지 다양하게 변화시켜 이용온도 수준에 적합한 잠열축열재를 선택할 수 있도록 하였으며, UREA 함량에 따른 잠열량을 분석한 결과 UREA의 함량이 증가함에 따라 잠열량이 점차로 감소하여 10wt%의 UREA를 첨가하였을 경우에는 38.3kcal/kg였으며, UREA의 함량이 20wt%까지 증가하는 동안 더 이상의 잠열량 감소는 없었다. 5. $30^{\circ}C$에서 $90^{\circ}C$까지의 가열과정에서 현열재인 물, 그리고 돌(화강암)과 잠열축열재의 축열량을 비교 분석한 결과, Octacosane은 상변화 온도 $60{\sim}70^{\circ}C$에서의 축열량이 물의 2.45배, 돌의 12.5배였으며, S.A.T.(Sodium Acetate Trihydrate)는 상변화 온도 $57.4^{\circ}C$에서의 축열량이 물보다 2.53배, 돌보다는 12.91배 큰 것으로 나타났다.