• 한국분말재료학회지
• /
• 제22권4호
• /
• pp.266-270
• /
• 2015

The synthesis of NiTi alloy powders by hydrogen reduction and dehydrogenation process of NiO and $TiH_2$ powder mixtures is investigated. Mixtures of NiO and $TiH_2$ powders are prepared by simple mixing for 1 h or ball milling for 24 h. Simple-mixed mixture shows that fine NiO particles are homogeneously coated on the surface of $TiH_2$ powders, whereas ball milled one exhibits the morphology with mixing of fine NiO and $TiH_2$ particles. Thermogravimetric analysis in hydrogen atmosphere reveals that the NiO and $TiH_2$ phase are changed to metallic Ni and Ti in the temperature range of 260 to $290^{\circ}C$ and 553 to $639^{\circ}C$, respectively. In the simple-mixed powders by heat-up to $700^{\circ}C$, agglomerates with solid particles and solidified liquid phase are observed, and the size of agglomerates is increased at $1000^{\circ}C$. From the XRD analysis, the presence of liquid phase is explained by the formation and melting of $NiTi_2$ inter-metallic compound due to an exothermic reaction between Ni and Ti. The simple-mixed powders, heated to $1000^{\circ}C$, lead to the formation of NiTi phase but additional Ni-, Ti-rich and Ti-oxide phases. In contrast, the microstructure of ball-milled powders is characterized by the neck-grown particles, forming $Ni_3Ti$, Ti-oxide and unreacted Ni phase.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.493-498
• /
• 1989

High purity, submicron BaTiO3 powder was prepared by a hydrothermal technique using Ba(OH)2.8H2O, TiCl4 and NH4OH as starting raw materials. The submicron BaTiO3 powder was synthesized at 130~23$0^{\circ}C$ for 2.5h to yield highly crystalline particles with a narrow particle distribution. The mole ratio of Ba(OH)2.8H2O/TiO(OH)2 was 1.5. It is possible to obtain BaTiO3 with Ba : Ti=1.00$\pm$0/01. The samples densified well at 13$25^{\circ}C$, showing a uniform and fine grain structure. The grain size ranged between 0.3 and 0.5${\mu}{\textrm}{m}$. The products obtained by hydrothermal treatment at various temperatures from 130 to 23$0^{\circ}C$ were characterized by XRD, DTA, BET and SEM etc.

• 청정기술
• /
• 제24권4호
• /
• pp.280-286
• /
• 2018

본 연구에서는 금속산화물 2종, $TiO_2$ 분말과 $Al_2O_3$ 분말을 이용하여 건식 조건에서의 기상 VOCs 흡착 성능을 평가하였으며, BET분석과 암모니아 in-situ FT-IR 분석을 통해 비표면적, 표면 산점을 분석하고 성능과의 상관성을 평가하였다. 그 결과 $TiO_2$ 분말, $Al_2O_3$ 분말은 각각 $317.6m^2\;g^{-1}$, $64m^2\;g^{-1}$의 비표면적을 갖으며, $TiO_2$ 분말의 경우 표면에 다수의 산점이 관찰되었다. 두 금속 산화물 분말을 이용하여 기상 VOCs 흡착 성능을 평가한 결과, 비표면적이 크고 다수의 산점을 보유한 $TiO_2$ 분말이 비교적 우수한 흡착 성능을 나타내었다. 특히 비표면적이 흡착성능에 직접적인 영향을 미치는 것으로 판단되며, 산점에 의한 영향에 대해서는 추가적인 연구가 요구된다. 우수한 흡착 성능을 나타낸 $TiO_2$를 기반으로 honeycomb, hollow fiber, disc의 성형체로 제조 한 결과, 분말보다 흡착 성능은 낮았으나 적용성 측면에서 유리하며 제조공정의 특성상 우수한 열적 내구성을 갖는 polymeric disc 흡착제의 경우, 수회의 고온 탈착공정 후에도 흡착 성능을 안정적으로 유지함을 확인하였다.

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1163-1168
• /
• 1999

• 한국결정성장학회지
• /
• 제13권2호
• /
• pp.63-67
• /
• 2003

Synthesis of $PbLaTiO_{3}$ : Mn powders containing La and Mn was carried out using $PbO,\;TiO_{2},\;La_{2}O_{3}\;and\;MnO_{2}$ as starting materials by hydrothermal method. In the synthesis of single phase $PbLaTiO_{3}$ : Mn powder containing La and Mn, the optimal x value corresponding to La substitution was 0.01 which corresponds to $0.99(Pb_{1-x}La_{2x/3}TiO_{3})+0.01MnO_{2}$. The optimal conditions for the preparation of the powder synthesis were 8 M-KOH solvent of hydrothermal solvent, $270^{\circ}C$ of reaction temperature and 24 hrs of run time. It was found that the synthesized powders had spherical morphology with average particle size of 70 nm and specific surface area of $5.5\;m^{2}/g$.

• 공업화학
• /
• 제7권6호
• /
• pp.1105-1114
• /
• 1996

${\alpha}-PbO_2/IrO_2-TiO_2/Ti$지지체상에 sodium lauryl sulfate 및 $TiO_2$분말을 첨가한 질산납 전해액에서 전착한 ${\beta}-PbO_2$층의 특성 및 성능을 XRD, SEM, cyclic voltammograms, 매크로전해를 이용하여 검토하였다. XRD분석결과 sodium lauryl sulfate 및 $TiO_2$분말의 존재하에 ${\alpha}-PbO_2/IrO_2-TiO_2/Ti$ 지지체 위에 전착한 ${\beta}-PbO_2$층은 순수한 ${\beta}-PbO_2$층과 마찬가지로 정방정계구조를 나타냈다. SEM결과 sodium lauryl sulfate는 전착층의 결정입자크기를 작게 하는 경향을 보여준다. sodium lauryl sulfate 및 $TiO_2$분말의 존재하에 전착한 ${\beta}-PbO_2$전극은 KOH 및 $HClO_4$지지전해질에서 양극산화에 대한 산소과전압과 내구성을 크게 향상시켰다. 티타늄마드래스에 전착시킨 ${\beta}-PbO_2$전극을 이용하여 과염소산용액으로부터 오존 발생에 대한 전극성능과 내구성을 검토하였다. $HClO_4$지지전해질에 sodium lauryl sulfate와 $TiO_2$분말을 첨가하여 ${\alpha}-PbO_2/IrO_2-TiO_2/Ti$ 마드래스상에 전착한 ${\beta}-PbO_2$전극이 가장 높은 전류효율과 내구성을 가짐을 확인하였다.

• 한국분말재료학회지
• /
• 제28권1호
• /
• pp.31-37
• /
• 2021

This study explores reducing the oxygen content of a commercial Ti-48Al-2Cr-2Nb powder to less than 400 ppm by deoxidation in the solid state (DOSS) using Ca vapor, and investigates the effect of Ca vapor on the surface chemical state. As the deoxidation temperature increases, the oxygen concentration of the Ti-48Al-2Cr-2Nb powder decreases, achieving a low value of 745 ppm at 1100℃. When the deoxidation time is increased to 2 h, the oxygen concentration decreases to 320ppm at 1100℃, and the oxygen reduction rate is approximately 78% compared to that of the raw material. The deoxidized Ti-48Al-2Cr-2nb powder maintains a spherical shape, but the surface shape changes slightly owing to the reaction of Ca and Al. The oxidation state of Ti and Al on the surface of the Ti-48Al-2Cr-2Nb powder corresponds to a mixture of TiO2 and Al2O3. As a result, the peaks of metallic Ti and Ti suboxide intensify as TiO2 and Al2O3 in the surface oxide layer are reduced by Ca vapor deposition.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.87-89
• /
• 1997

The BaTiO$_3$ fine powder was prepared by hydrthermal method using titanium tetrahydoxide (Ti(OH)$_4$) and barium dihydroxide (Ba(OH)$_2$.8$H_2O$) as raw materials. The fine powder was obtained at temperatures as low as 160 to 185$^{\circ}C$. The properties of the BaTiO$_3$ powder were studied as a function of various parameters (reaction temperature, reaction time, Ba/Ti=ratio, etc). The average particle size of the BaTiO$_3$ increased with increasing reaction temperature. After hydrothermal treatment at 17$0^{\circ}C$ for 8 h, the average particle size of the BaTiO$_3$ powder was about 30 nm and the particle size distribution was narrow.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.641-649
• /
• 2002

The redox properties of a homogeneously-precipitated $TiO_2$ rutile powder with a BET surface area of ~$200 m^2$/g, consisting of an acicular primary particle, were characterized using photocatalytic reaction in aqueous 4-chlorophenol, Cu-EDTA and Pb-EDTA solutions under ultraviolet irradiation, compared to those of commercial P-25 X$200 m_2$ powder with a spherical primary particle as well as home-made anatase $TiO_2$ powder with ~$200 m^2$/g BET surface area. Here, the anatase powder also includes mainly the primary particles very similar to the acicular shapes of the rutile $TiO_2$ powder. The rutile powder showed the fastest decomposition rate and the largest amount in the photoredor, compared with the anatase or P-25 powder, while the anatase powder unexpectedly showed the slowest rate and the smallest amount in the same experiments regardless of almost the same surface area. From results, the excellent photoredox abilities of this rutile powder appears to be due to specific powder preparation method, like a homogeneous precipitation leading to direct crystallization from the solution, regardless of their crystalline structures even when having the similar particle shape and surface area.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1095-1096
• /
• 2006

When $Y_2O_3$ was added to Ti-excess $BaTiO_3$ ((Ba+Y)/Ti =1), the area occupied by $Y^{3+}$ ion was confirmed by its microstructure development, electrical conductivity behavior and lattice constant. Grain growth inhibition was observed when the content of donor dopant exceeded a critical value ($x{\approx}.0.01$) in $BaTiO_3+x(0.5Y_2O_3+TiO_2)$ system. A donor-doped behavior was observed at various Y contents ($0.2\sim3.0$ mol% Y) when $Y_2O_3$ was added to $TiO_2$-excess $BaTiO_3$. As Y content was increased, (002) and (200) peaks shifted to higher angles and the lattice constant (a and c axis) decreased gradually.