• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.7-10
• /
• 2005

[ $TiO_{2}-ZrO_{2}$ ] powders were successfully synthesized by the sol-gel process using titanium iso-propoxide as a precursor. The amorphous $TiO_{2}$ particles, 70 nm in size, homogenously adhered to the surface of $ZrO_{2}$ the powders. After calcination at $450^{circ}C$, most of the $TiO_{2}$ powders appeared as an anatase type, whereas they changed to a rutile phase at $750^{circ}C$. For comparison of photocata­lytic activity, $TiO_{2}-ZrO_{2}$ nano-sized powders calcined at $450^{circ}C,\;600^{circ}C,\;and\;750^{circ}C$ were used. In the $TiO_{2}-20wt\%$ $ZrO_{2}$ powders cal­cined at $450^{circ}C$, there was excellent removal efficiency of Methyl Orange (MO). For the calcination temperature increased, $TiO_{2}­ZrO_{2}$ nano-sized powders increased $ZrO_{2}$ contents showed the good photoactivity for the photooxidation of MO.

• 대한환경공학회지
• /
• 제31권10호
• /
• pp.927-932
• /
• 2009

난분해성 및 독성 폐수 처리는 고급산화 기술과 생물학적 처리가 친화결합(intimate coupling) 을 이룰 때 최적의 효과를 거둘 수 있다. 본 연구에서는 광촉매 산화와 생물학적 처리를 친화결합하도록 고안된 다공성 $TiO_2$ 코팅 담체를 제조하여 광촉매 반응에 관한 동력학 연구를 수행하였다. 저온 sol-gel 코팅법으로 제조된 PVA 재질의 다공성 $TiO_2$ 담체는 UV 조사하에서 methylene blue (MB)를 효율적으로 분해하였다. 시험 농도(최대 100 ${\mu}M$)에서 MB의 흡착속도는 1차반응 (first-order reaction)의 성질을 보였으며, 흡착과 산화를 포함한 총반응속도는 유사 Langmuir 모델로 예측 가능하였다. 이러한 원인은 담체 표면에 MB가 흡착됨에 따라 UV 조사에 의하여 광촉매 반응이 일어날 표면이 줄어들었기 때문인 것으로 판단된다. 다공성 $TiO_2$ 담체의 단위 $TiO_2$ 량당 최대 MB 제거속도는 슬러리 $TiO_2$ 반응기에서 얻은 MB 제거속도보다 4배 더 빨랐다. 본 연구로 인하여 저온 sol-gel 코팅법으로 제조한 PVA 재질 다공성 $TiO_2$ 담체가 성공적인 광분해 반응을 나타내는 것이 확인되었으며, 동 담체에 대한 광촉매 반응의 동력학적 성질이 구명되어, 향후 생물처리를 친화결합 시킬 수 있는 연구 바탕을 확보하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.511-511
• /
• 2007

Low-emissivity (low-e) coatings with visible transparency have attracted increased interest m reducing heat radiation loss through window panes from ecological and sustainable aspects. $TiO_2$-silver transparent thin films for low-e have good properties for UV and IR blocking as well as photocatalyst compared to that with commercial UV blocking films such as fluorine doped oxide (FTO), antimony doped tin oxide (ATO), etc. In this study, transparent $TiO_2$-silver thin films were prepared by successive ink-jet printing of commercial nano silver and $TiO_2$ sol. The $TiO_2$ sol, as ink for ink-jet printing, were synthesized by hydrothermal process in the autoclave externally pressurized with $N_2$ gas of 200 bar at $120^{\circ}C$ for 10 hrs. The synthesized $TiO_2$ sols were all formed with brookite phase and their particle size was several to 30 nm. At first nano sized silver sol was coated on glass substrate, after that $TiO_2$ sol was coated by ink-jet printing. With increasing coating thickness of $TiO_2$-silver multilayer by repeated ink-jet coating, the absorbance of UV region (under 400nm) and IR region (over 700nm) also increase reasonably, compared to that with commercial UV blocking films.

• 한국세라믹학회지
• /
• 제33권10호
• /
• pp.1138-1146
• /
• 1996

Al2TiO5 powder was prepared by the sol-gel processing from th metal alkoxides ; aluminium sec-butoxide (Al(OC4H9)3 and tetraethyl orthotitanate (Ti(OC2H5)4) The particles of Al2TiO5 produced from alkoxides were measured to be below $1.5mutextrm{m}$ and mre than 90% weere below 1 ${\mu}{\textrm}{m}$ however those from commercial alumina and titania were over 0.5-7${\mu}{\textrm}{m}$ and only 60% were below 1${\mu}{\textrm}{m}$ and 90% were below 2.5${\mu}{\textrm}{m}$ Therefore Al2TiO5 powder produced from alkoxides had the narrower distributionin size than that produced from the commercial alumina and titania powders. The addition of mullite or Al2O3 powder to the prepared aluminum titanate inhibited the grain growth and this resulted in decreased and increase in density.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.172-180
• /
• 2013

Aramid fibers are being used increasingly in a wide range of application due to low density, high specific strength, high modulus, and high thermal resistance. But owing to its special physical and chemical structures, it is sensitive to absorb the ultraviolet light which will degrade the fiber's useful mechanical properties and structure. In this paper, the sol-gel technique was used to improve the photo-stability of p-aramid fibers. $TiO_2$, modified $SiO_2$/$TiO_2$ sol were used as coating solutions. The influence of the such coatings on the photo-stability of p-aramid fiber was investigated by an accelerated photo-ageing method using xenon lamp. The photo-stability of p-aramid fiber showed obvious improvement after the modified silica binding coating. But the amorphous $TiO_2$ sol coatings showed a negative effect. After 144h light exposure, the modified silane binder-coated fibers showed less degradation in mechanical properties with the retained tensile strength greater than about 70% of the original value.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.212.2-212
• /
• 2003

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.23-28
• /
• 1999

Au 미립자가 분산된 $TiO_{2}$ 박막을 졸겔담금법과 열처리공정으로 실리카 유리기판위에 제조하였다. $TiO_{2}$ 박막제조는 titanium tetraisopropoxide-EtOH-HCl-$H_{2}O$-hydrogen tetrachloroaurat (III) tetrahydrate계를 이용하였다. 고농도로 Au 화합물을 함유하면서 투명한 코팅용액을 형성하는 조건을 검토하였다. Au 금속미립자의 크기를 조절하기 위하여 광환원공정을 채택하였다. UV 조사에 따른 Au 입자의 변화와 $TiO_{2}$ 매트릭스의 상전이과정을 XRD, SEM, TEM and UV-visible spectrophotometer로 관찰하였다. 분산제로서 CPCl (Cetylpyridinium chloride monohydrate)의 효과를 평가하였다.

• Environmental Analysis Health and Toxicology
• /
• 제24권4호
• /
• pp.333-339
• /
• 2009

In this study, we investigated the biological toxicity of nano-scale Zn (0.1, 0.5, and 1 mol%)-doped $TiO_2$ and pure $TiO_2$ nanoparticles using zebrafish embryogenesis as our model organism. Zn-doped $TiO_2$ nanoparticles were prepared using a conventional hydrothermal method for the insertion of zinc into the $TiO_2$ framework. The characters of Zn-doped $TiO_2$ (0.1%, 0.5%, 1%Zn) and pure $TiO_2$ were about 7~8 nm. These sizes were smaller than 100~200 nm of $TiO_2$ was prepared using the sol-gel method. Particularly, in this study, we found no significant biological toxicity in the hatching rate and abnormal rate under expose pure $TiO_2$ and Zn-doped $TiO_2$ nanoparticles were prepared using a conventional hydrothermal method of zebrafish. It was different from the biological damage under $TiO_2$ nanoparticles were prepared using sol-gel method. We assessed that the damage was not linked to the particle's nanometer size, but rather due to the prepare method. Moreover, $TiO_2$ nanoparticles were prepared using a hydrothermal method were not shown to cause cytotoxic effects, like apoptosis and necrosis, that are the major markers of toxicity in organisms exposed to nanomaterials. Therefore, there is some relationship with biological toxicity of nanoparticles and the prepare method of nanometer size particles.

• 공업화학
• /
• 제8권2호
• /
• pp.301-307
• /
• 1997

응집이 없는 단분산의 $SiO_2/TiO_2$ 복합 미립자를 얻기 위하여 $TiO_2$seed가 분산되어 있는 에탄올 수용액과 TEOS (Tetraethyl Orthosilicate)를 에탄올에 녹인 용액을 혼합하여 $TiO_2$ 주위에서 TEOS가 가수분해 및 축합 반응이 일어나도록 유도하여 복합 미분말을 제조하였다. 촉매로 암모니아를 사용하였고, 반응온도는 실온이었다. 반응변수는 TEOS의 농도, 암모니아의 농도, $TiO_2$ seed의 크기 및 양이었다. 응집이 없는 복합 미립자를 얻기 위한 최적조건은 [TEOS]=0.3M, [$NH_4OH$]=0.7M, $TiO_2$ seed의 크기가 200~300 nm이었고, 이때 $0.8{\sim}0.9{\mu}m$의 입자크기를 갖는 복합입자를 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1189-1196
• /
• 2003

Sol-gel법으로 강유전성 B $i_{3.25}$L $a_{0.75}$ $Ti_3$ $O_{12}$ (BLT) stock solution을 합성하고 Pt/Ti $O_2$/ $SiO_2$/Si 기판위에 스핀코팅법으로 BLT 박막을 증착하였다. 본 실험에서는 Bi(TMHD)$_3$, La(III)2-Methoxyethoxide, Ti(IV)i-propoxide를 출발물질로 사용하였으며 2-Methoxyethanol을 용매로 사용하였다. 급속열처리(RTA)가 BLT 박막의 결정성장을 촉진시키기 위해 사용되었고, RTA를 실시한 시편과 RTA를 실시하지 않은 시편의 전기적 특성을 비교하였다. RTA를 실시한 후 72$0^{\circ}C$에서 로 열처리 한 BLT 박막의 경우 5V 인가 전압 하에서 2Pr 값은 RTA를 실시하지 않은 경우보다 27% 증가한 20.46$\mu$C/$ extrm{cm}^2$이었다.