• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.214-215
• /
• 2018

This paper has been researched that the earlier compressive strength of the cement pastes containing nano-TiO₂ particle curing 1day, 3days and 7days. For the compressive strength measurements, all samples(dimensions 50×50×50mm) were prepared in accordance with ASTM C109. The compressive strength of the specimens with nano-TiO₂ at the early age(1day, 3days and 7days) stage was lower than that of the reference group. Therefore, nano-TiO₂ has little positive effect on the improvement of the compressive strength of cement pastes during early ages.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.360-361
• /
• 2008

A new kind of SBM co-polymer binder as styrene, n-butyl acrylate, and methacrylic acid (SBM) monodisperse co-polymer binder materials basted on $TiO_2$ pastes was synthesized and this $TiO_2$ pastes were applied of dye-sensitized solar cells (DSSCs). The SBM co-polymer binder was prepared by soap-free emulsion copolymerization using a PEG-EEM macromonomer. The photoanodes were characterized by morphology investigated from field emission scanning electron microscopy (FE-SEM). The photoelectrochemical properties of the thin films and the performance of DSSCs were measured by photovoltaic-current density. DSSC based on the emulsion co-polymer binder was obtained conversion efficiency of 7.1% under irradiation of AM 1.5($100mWcm^{-2}$).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.109-110
• /
• 2006

Nanocrystalline $TiO_2$ electrode were prepared by spray-printing in order to efficiency and improved fill factor. Different compositions of nanocrystalline $TiO_2$ pastes are described, based on $TiO_2$ powder made by ourselves. The produced by spray printing $TiO_2$ films were compare with the produced by squeeze printing $TiO_2$ films and was studied in the light of static I-V characteristics. The produced $TiO_2$ films are extensively characterized by means of spectroscopy(Ramon, XRD) and microscopy(FE-SEM).

• 공업화학
• /
• 제34권1호
• /
• pp.36-44
• /
• 2023

코어-쉘 TiO₂/Ag 나노입자를 수정된 졸-겔 공정과 함께 acetoxime을 환원제로 사용한 물/dodecylbenzenesulfonic acid (DDBA)/cyclohexane의 역 미셀 방법으로 합성하였다. 합성된 TiO₂/Ag 나노입자의 구조, 형태 및 크기를 XRD, UV-visible spectroscopy, SEM, TEM 및 TGA를 이용하여 조사하였다. TiO₂/Ag 나노입자의 크기는 [물]/[DDBA]의 몰비를 조절하여 제어할 수 있었다. TiO₂/Ag 나노입자의 크기와 다분산성은 [물]/[DDBA]의 몰비가 증가함에 따라 증가하였다. 아나타제 결정상의 TiO₂ 나노입자 위에 생성된 Ag 나노입자는 430 nm 주변에서 강한 표면 플라즈몬 공명(SPR) 흡수 특성을 나타내었다. SPR 피크는 나노입자 크기의 증가에 따라 장파장으로의 적색 이동이 나타났다. 70 wt% 조성으로 TiO₂/Ag 나노입자를 분산시켜 전도성 페이스트를 제조하고, 스크린 인쇄법으로 PET 필름에 코팅하여 전도성을 조사하였다. TiO₂/Ag 나노입자 페이스트로 코팅된 필름은 상용 Ag 페이스트의 경우보다 높은 405~630 μΩ/sq 영역의 표면저항을 나타내었다.

• 대한토목학회논문집
• /
• 제41권4호
• /
• pp.357-364
• /
• 2021

본 연구에서는 서로 다른 종류의 TiO₂ 혼입이 시멘트 페이스트의 수화특성 및 질소산화물 제거성능에 미치는 영향에 대해 조사하였다. 상용 제품인 P-25와 NP-400, 폐수 슬러지에서 제조된 GST, 총 세 종류의 TiO₂를 시멘트 무게대비 0, 5, 10, 20 % 첨가하여 시멘트 페이스트의 수화특성 및 질소산화물 제거성능을 분석하였다. 미소수화열 측정결과 TiO₂의 혼입은 시멘트 페이스트의 초기 수화반응에 큰 영향을 미치는 것이 확인되었으며, P-25, NP-400, GST 순으로 더 높은 누적 발열량을 나타내었다. 이로 인해 Rietveld 분석결과 TiO₂ 혼입 샘플에서 더 많은 C-S-H의 생성량이 관찰되었으며, 이는 TiO₂ 혼입 시멘트 페이스트의 28일 압축강도 증가에 영향을 미친 것으로 판단된다. SEM/EDS 분석결과 P-25, GST, NP-400 순으로 페이스트 샘플 표면에 더 많은 Ti 원소의 함량이 관찰되었지만, NO_x 제거 성능은 P-25, NP-400, GST 순으로 우수한 것으로 확인되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.253-254
• /
• 2008

The $TiO_2$ Pastes was prepared with the starting materials of $TiO_2$ (P-25), ethyl cellulose, a-terpineol and bis(2-ethylhexyl) phthalate, and this $TiO_2$ paste application for dye-sensitized solar cells (DSSCs) were investigated. In order to improved transparency of $TiO_2$ photoanode films, $TiO_2$ paste was changed ethyl cellulose and a-terpineol contents. The morphology of prepared $TiO_2$ films were investigated by field emission scanning electron microscopy (FE-SEM). The electrochemical properties of the thin films and the performance of DSSCs were measured by photovoltaic-current density and AC impedance. Energy conversion efficiency was obtained about 5.7% at ethyl cellulose and a-terpineol on best mixed ratio under illumination with AM 1.5 ($100mWcm^{-2}$)simulated sunlight.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.116-116
• /
• 2009

$TiO_2$ pastes was synthesized to obtained of high efficiency dye-sensitized solar cells using size dependent co-polymer. SBM co-polymer binder is consist of styrene, n-butyl acrylate, and methacrylic acid (SBM) monodisperse co-polymer binder materials and this $TiO_2$ pastes were applied of dye-sensitized solar cells (DSSCs). The photoanodes were characterized by ATR-Fourier Transform spectrometer, X-ray diffraction (XRD) and morphology was investigated by field emission scanning electron microscopy (FE-SEM). The photoelectrochemical properties of the thin films and the performance of DSSCs were measured by photovoltaic-current density, AC impedance and monochromatic incident photon-to-current conversion efficiency (IPCE). DSSC based on the 100nm size co-polymer binder was obtained conversion efficiency of 8.1% under irradiation of AM 1.5(100 $mWcm^2$).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.128-130
• /
• 2008

One of methods to increase the efficiency of a dye-sensitized solar cell(DSC) is the effective usage of the incident light. It can be controlled by using a light scattering layer. The light scattering effect makes that the optical path length of incident light to DSC increases. And then, the photocurrent and the efficiency is increased because of the increase of dye adsorption and the abundant amount of the light. In this study, we apply the light scattering layer to DSC by using two $TiO_2$ pastes that have different particle sizes. As a result, the photocurrent increases and the total efficiency is also increases in the case of using large-sized $TiO_2$ particle as the light scattering layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.75.1-75.1
• /
• 2010

Dye sensitized solar cells(DSSCs) have been extensively studied due to their various advantages such as low production cost, colorful design, and eco-friendly process. Long optical path length is one of the most effective method to improve light harvest efficiency for DSSCs. Multi-layered $TiO_2$ nano-structured film with scattering layer has been studied to generate scattering effect by many researchers. It was expected that the difference of refractive index between $TiO_2$ particles and glass frit would generate the light scattering effect and provide the long optical path length. Therefore, to enhance the scattering effect, the frits of $Bi_2O_3-B_2O_3$-ZnO glass system that has the different refractive index were added to $TiO_2$ pastes in this study. First of all, the absorbance and haze factor of $TiO_2$ electrode with dyes and the refractive index of glass frit and $TiO_2$ were measured, respectively. To study the effect of frits, the efficiencies of DSSCs added glass frit and without glass frit were compared. Our results showed slightly higher efficiency with the different absorbance and haze factor of $TiO_2$ and glass frit. It was considered that the light scattering effect would be improved with adding frits to $TiO_2$ paste. Our preliminary studies will be useful for increasing efficiency of DSSCs.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.538-542
• /
• 2019

광 전환 효율에 관여하는 $TiO_2$와 같은 반도체 산화물은 염료 감응 태양전지(Dye-sensitized solar cell, DSSC)의 주요 요소이며, 효율을 개선하기 위해 서로 다른 반도체 산화물을 혼합하여 Pastes를 제조해 사용하는 연구가 이루어지고 있다. 본 연구에서는 $TiO_2-Nb_2O_5$ 혼합 반도체 산화물을 제조하여 염료 감응 태양전지의 특성을 분석하였다. 혼합 반도체 산화물이 광 전환 효율에 미치는 전기적인 특성을 분석하기 위해서 $Nb_2O_5$을 서로 다른 비율로 첨가하여 태양전지를 제작하였다. 이에 $Nb_2O_5$가 첨가됨에 따라 전해질과의 접촉에 의한 재결합 현상보다 전도성이 겅화되어 태양전지의 단락 전류, 개방전압, 변환 효율 등이 개선되는 것을 확인하였다.