• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.309-314
• /
• 1988

In this study, the effect of the size of sintered body on resonant and filter characteristics in Pb(Sn1/2Sb1/2)O3-PbTiO3 piezo-electric system were investigated. The attenuation characteristics of ring-dot type and ladder type filter were also investigated. As the size of sintered body was decreased, the resonant characteristic(Fr, Fa) and the center frequency(Fo) were increased. As the poling field was increased, the Kp and bandwidth were increased. The big difference between rign-dot type and ladder type was the sharpness of bandwidth, selectivity and the movement of center frequency.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 춘계총회,특별강연,심포지움,연구발표회
• /
• pp.17.2-17.2
• /
• 2000

• 전기의세계
• /
• 제26권1호
• /
• pp.82-86
• /
• 1977

Semiconducting Barium Titanate shows resistivity anomaly near the transition temperature 120.deg. C. Its transition temperature decreases about 6-7.deg. C per 1 mole % SnO$_{2}$, which is likely to compose (BaSb) (TiSn) $O_{3}$ structure by making Sn$^{+4}$ ions occupy Ti$^{+4}$ ion sites. Grain boundories, whose existance is the cause of having high resistivity in Semiconducting BaTiO$_{3}$ disappear due to the spontaneous polarization below the transition temperature, and it is believed that the phase transition makes semiconducting BaTiO$_{3}$ have resistivity anomaly at certain temperature. Temperature and frequency dependencies of resistivity are also investigated for practical application.ion.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.7-12
• /
• 1986

Dielectric properties of $Ba_{0.9}Ca_{0.1}(Ti_{1-x}Sn_x)O_3$ were investigated from x=0 to 0.20, and temperature range -4$0^{\circ}C$~13$0^{\circ}C$ Density and grain size decreased with increasing Sn content due to grain growth inhibitor. Dielectric constant below the Curie temperature increased with increasing Sn content and dissipation factor dec reased. These results are due to grain size effect and internal stress. Curie temperature was shifted to lower temperature with increasing ratio of total polarizability to volume resulting from substitution of $Ba^{2+}$ ion with $Ca^{2+}$ ion $Ti^{4+}$ ion with $Sn^{4+}$ ion.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.99-102
• /
• 1997

An electronic nose system is an instrument designed far mimicking human olfactory system. It consists generally of gas (odor) sensor array corresponding to olfactory receptors of human nose and artificial neural network pattern recognition technique based on human biological odor sensing mechanism. Considerable attempts to develop the electronic nose system have been made far applications in the fields of floods, drinks, cosmetics, environment monitoring, etc. A portable electronic nose system has been fabricated by using oxide semiconductor gas sensor array and pattern recognition technique such as principal component analysis (PCA) and back propagation artificial neural network The sensor array consists of six thick film gas sensors whose sensing layers are Pd-doped WO$_3$ Pt-doped SnO$_2$ TiO$_2$-Sb$_2$O$_3$-Pd-doped SnO$_2$ TiO$_2$-Sb$_2$O$_{5}$-Pd-doped SnO$_2$+Pd filter layer, A1$_2$O$_3$-doped ZnO and PdCl$_2$-doped SnO$_2$. As an application the system has been used to identify CO/HC car exhausting gases and the identification has been successfully demonstrated.d.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.91-93
• /
• 1989

x $Pb(Sb_{1/2}Sn_{1/2})O_3-PbTiO_3-PbZrO_3$, (0.05$\leq$x$\leq$0.30) ternary compound ceramics were fabricated by the mixed oxide method. The sintering temperature and time were $1200{\sim}1300[^{\circ}C]$, 2 hour, respectively. Increasing the PSS contents, the transition temperatures were decreased. The relative dielectric constant and Curie temperature of the 0.30PSS-0.20PT-0.50PZ specimens were 372, 190[$^{\circ}C$]. The pyroelectric coefficient, figure of merits for pyroelectric current and detectivity of the 0.25PSS-0.25PT-0.50PZ specimens had the good values, $5.41{\times}10^{-8}[C/cm^{2}K]$, $27.72{\times}10^{-12}[Ccm/J]$, $7.65{\times}10^{-10}{Ccm/J]$, respectively.

• 센서학회지
• /
• 제6권4호
• /
• pp.274-279
• /
• 1997

$WO_{3}$ 모물질로 하여 NOx 검지센서를 제조하여 전기적 특성과 가스감지특성을 알아 보았다. $SnO_{2}$와 $TiO_{2}$를 포함한 $WO_{3}$ 후막은 동작온도 $400^{\circ}C$에서 순수한 $WO_{3}$ 후막보다 NOx가스에 대한 뛰어난 감도와 가스 흡탈착 특성을 보였다. $TiO_{2}-WO_{3}$ 후막에 Ru와 Au와 같은 귀금속 촉매를 특별히 첨가하여 제작된 센서에서는 NOx 가스에 대한 감도, 회복 속도 및 선택도 등을 더욱 개선되었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.399-401
• /
• 2009

Transparent conductive metal oxide films of $In_{2-x}Ti_xO_3$ (ITiO) and $In_{2-x}Sn_xO_3$ (ITO) were deposited by RF magnetron sputtering at substrate temperature of $300^{\circ}C$ and at high rate (${\sim}10$nm/min). Electrical and optical properties of the films were investigated as well as film structure and morphology, as it is compared with the commercial F:$SnO_2$ (FTO) glass. Near infrared ray transmittance of ITiO is the highest for wavelengths over 1000nm, which can increase dye sensitized compared to ITiO and FTO. Dye-sensitized solar cells (DSCs) were fabricated using the ITiO, ITO and FTO. Photoconversion efficiency (${\eta}$) of DSC using ITiO is 5.5%, whereas 5.0% is obtained from DSC with ITO. both at 100 mW/$cm^2$ light intensity.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.719-725
• /
• 1995

ZST powders were synthesized by coprecipitation of (Zr4+, Ti4+)-hydroxide in the presence of SnO2 particles. Zn(NO3)2 was used as a sintering additive, and according to the adding sequence, sintering and dielectric properties were investigated. Sintered densities of ZST prepared by adding Zn(NO3)2 before calcination were a little higher than those added after calcination, and dielectric properties of the specimen added by Zn(NO3)2 after calcination were better (sintered at 125$0^{\circ}C$/2 h ; Q$\times$f(GHz)=49, 000, $\varepsilon$r=41) than before calcination (Q$\times$f(GHz)=42, 000, $\varepsilon$r=39.5). Through the observation of TEM, it was identified that the cause was due to the difference of the degree of Zn2+ diffusion into grains. With increasing sintering time from 2 to 8 hrs, grain size was doubled and dielectric properties were somewhat deteriorated.

• 한국세라믹학회지
• /
• 제32권5호
• /
• pp.535-542
• /
• 1995

The effect of sintering temperature, sintering time and forming pressure on microwave dielectric properties of (Zr1-xSnx)TiO4 ceramics containing 1.0wt% B2O3, 0.3 wt% La2O3 and 1.0wt% NiTa2O6 was investigated using the response surface methodology. The optimum values of processing variables were determined based on the reproducibility. The optimum values of the dielectric constant of >35. Q.f0 of >55000 and $\tau$f=$\pm$5 ppm/$^{\circ}C$ could be obtained when the sample was pressed at 500~600kg/$\textrm{cm}^2$ and sintered at 1500~155$0^{\circ}C$ for 2~3 hrs.