• 청정기술
• /
• 제21권4호
• /
• pp.265-270
• /
• 2015

리튬이차전지에서 전지의 용량을 증가시키기 위하여 음극의 전기화학적 용량을 증가시키는 것이 중요하다. 음극활물질 중에서 SnO₂와 Li₄Ti₅O₁₂는 흑연을 대체하기 위한 물질로 많은 연구가 진행되고 있다. 본 연구에서는 SnO₂/Li₄Ti₅O₁₂ 혼합물을 고상법으로 합성하였으며, SnO₂를 Li₄Ti₅O₁₂에 혼합하여 전기화학적인 용량을 증가시키는 실험을 수행하였다. SnO₂가 혼합될 경우에 Li₄Ti₅O₁₂의 용량보다 큰 전기화학적 용량을 갖는 물질을 합성할 수 있었다. 하지만 SnO₂의 특성으로 인하여 사이클이 진행됨에 따라서 용량이 감소하는 현상이 관찰되었다.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.721-729
• /
• 1991

SnO2-TiO2(Pt or Pd), as raw material for hydrocarbon gas sensors, was prepared by a coprecipitation method. The SnO2-TiO2-based thick film gas sensors were made by screen printing technique. The titanium dioxide synthesized was shown to be anatase structure from XRD peaks and was transformed to rutile structure between 700$^{\circ}C$ and 1000$^{\circ}C$. Titanium dioxide in SnO2-TiO2 thick films devices plays a very important role in the enhancement of the sensitivity to CH4 and C4H10. In the case of SnO2-TiO2(Pt) sensors, titanium dioxide that was rutile structure enhanced the sensitivity of the thick film to CH4. Platinum added to the raw powder at coprecipitation (as chloroplatinic acid VI hydrate) improved the gas sensitivity to hydrocarbon gases. Therefore, it is expected that the SnO2-TiO2(Pt) thick film sensors fabricated in this experiment could be put into practical use as LPG (primary component : C4H10 and C3H8) and LNG (primary component : CH4) sensors.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.69-72
• /
• 2020

본 연구에서는 SnO₂ nanoparticles (NPs) 위에 TiO₂ NPs를 코팅하여 Quantum Dots Light Emitting Diodes (QLEDs)를 제작하였다. TiO₂ NPs는 SnO₂ NPs보다 conduction band minimum (CBM) 준위가 낮다. 따라서 SnO₂ 층과 발광층의 CBM 준위 사이에 위치해 에너지 장벽을 감소시키고, 전자의 이동을 원활하게 할 것으로 예상하였다. QLEDs는 inverted 구조로 제작되었으며, SnO₂ 단일층을 사용한 경우보다 발광 특성이 향상된 것을 확인하였다. 이중 전자수송층을 적용한 이번 연구를 통해 SnO₂를 QLEDs에 전자수송층으로 적용할 수 있을 것으로 기대한다.

• 마이크로전자및패키징학회지
• /
• 제8권1호
• /
• pp.27-32
• /
• 2001

($Zr_{0.8}, Sn_{0.2})TiO_4$의 소결온도를 저하시키고 품질계수 향상의 목적으로 첨가한 $V_2O_5$가 다른 donor형태의 화합물과 달리 품질계수의 저하를 가져오는 원인을 $Ta_2O_5$가 첨가된 ($Zr_{0.8}, Sn_{0.2})TiO_4$와 미세 구조변화, 전기전도도, 산화상태의 관점에서 비교 분석하였다. 일반적으로 donor형태의 화합물의 첨가는 ($Zr_{0.8}, Sn_{0.2})TiO_4$의 산소공공의 농도를 감소시켜 품질계수의 증가를 가져오는 것으로 알려져 있다. $V_2O_5$의 첨가의 경우는 액상소결에 의한 결정입계상 존재, 섬유상 형태의 $V_2O_5-TiO_2$rich 이차상 형성 및 Vanadium 이온의 산화상태 불안정에서 기인된 산소공공의 농도 증가가 복합적으로 ($Zr_{0.8}, Sn_{0.2})TiO_4$의 품질계수 저하 요인으로 작용하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권11호
• /
• pp.511-516
• /
• 2002

$TiO_2-SnO_2$ thin films are fabricated using sol-gel method. In case the amount of water required hydrolysis smaller than that for stoichiometry, Ti sol forms clear sol which has normal chain structure. On the contrary, in case the amount of water required hydrolysis larger than that for stoichiometry, Ti sol forms suspended sol which has cluster structure. The thickness of thin films increase about $0.03{\sim}0.04{\mu}m$ every a dipping. The permittivity and dissipation factor of $TiO_2-SnO_2$ thin films decrease with increasing frequency. Thin films show semiconductive characteristics above $400^{\cric}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.79-81
• /
• 2004

$TiO_2-SnO_2$ thin films are fabricated using sol-gel method. The thickness of thin films increase about $0.03{\sim}0.04{\mu}m$ every a dipping. The permittivity and dissipation factor of $TiO_2-SnO_2$ thin films decrease with increasing frequency. Thin films show semiconductive characteristics above $400^{\circ}C$.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.639-642
• /
• 2009

The research was performed to find out the optimum firing condition for the $SnO_2-TiO_2-V_2O_5$ system yellow pigment. The pigment based on $SnO_2-V_2O_5$ system showed very intense yellow color and it was used widely in ceramics industry. Synthesized pigment, with partial substitutions of $SnO_2\;by\;TiO_2$, was fired at $1300{^{\circ}C}$ soaking 1h and it showed bright yellow color. $SnO_2-TiO_2-V_2O_5$ system was very more intensive changes in yellow color by colorimetric value $b^*$ than $SnO_2-V_2O_5$ system. Synthesized yellow pigments were characterized by X-ray diffraction (XRD), FT-IR, and UV-vis spectroscopy. The best composition for yellow pigment was 93:7:0.5(mole%) for $SnO_2-V_2O_5-TiO_2$. The measurement of CIE $L^*a^*b^*$ of pigment was $L^*(78.82),\;a^*(-4.88)\;and\;b^*$(59.25).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 추계학술발표강연 및 논문개요집
• /
• pp.173-173
• /
• 2002

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.305-314
• /
• 1991

This study was conducted to research the formation and the color development of NiO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing ZnO-Fe2O3 as a basic composition, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.Fe2O3 system, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.TiO2 system, and {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.SnO2 system were prepared with {{{{ chi }}=0, 0.2, 0.5, 0.7, 1 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 30 minutes. The reflectance measurement and the X-ray analysis of these specimens were carried out and the results were summarized as follows. 1. In the specimens which included NiO, it was difficult for the spinel structure to be formed. 2. As increasing the contents of NiO and Fe2O3, all the groups which were yellow or green colored changed to brown. 3. NiO-ZnO-Fe2O3 system and NiO-ZnO-TiO2 system formed the spinel structure and the illmenite structure appeared in NiO-TiO2 system.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.897-907
• /
• 1991

This study was conducted to research the formation and the color development of CoO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing CoO-ZnO-Fe2O3, in which CoO causes the color, as a basic composition, $\chi$CoO.(1-$\chi$)ZnO.Fe2O3 system, $\chi$CoO.(1-$\chi$)ZnO.TiO2 system and $\chi$CoO.(1-$\chi$)ZnO.SnO2 system were prepared with $\chi$=0, 0.2, 0.5, 0.7, 1.0 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 90 minutes. These specimens were analyzed by the reflectance measurement and the X-ray diffraction analysis and the results were summarized as follows: 1. All of the specimens formed the spinel structure and were colored with stable yellow or blue. 2. As the content of CoO and Fe2O3 in the specimens being increased, the reflectance of each specimen was measured becoming lower and the colors were changed from yellow to greyish blue and from blue to dark blue. 3. As the substituting amount of Co2+ ion for Zn2+ ion in $\chi$CoO-ZnO-TiO2-SnO2 system being increased, the colors were changed from blue to greyish blue. The colors were changed from yellow to grayish green owing to the tetrahedral Co2+ ions being increased, the octahedral Co2+ ions being decreased with increasing the amount of Sn4+ ions. 4. CoO-ZnO-Fe2O3-TiO2-SnO2 system, in which Zn2+ was substituted with Co2+ and Fe3+ was substituted with Ti4+ and Sn4+, easily formed the spinel structure without regard to the amount of substitution or the ion owing to the selectivity of the coordination number: 4 of Zn2+, 4 of Co2+, 6 of Fe3+ or 6 of Ti4+ and Sn4+.