• Resources Recycling
• /
• v.8 no.3
• /
• pp.26-30
• /
• 1999

The removal of phosphorus was investigated from sewage waste water (SWW) using the used foundry sand (UFS). The optimal pH occurred at pH 2 for adsorption of phosphorus species in batch test. Phosphorus could be recovered with 99.9% from SWW in two hours at pH 2 using 100 g of UFS per liler of SWW. The adsorption of phosphorus species on UFS obeyed Langmuir isotherm, whose equation could be expressed by 1= 0.00059/(1+2.49878). Continuous column test for adsorption showed that breakthrough point appeared In 25 hours on the condition of breakthrough concentration of 8 mg/l

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.11
• /
• pp.456-463
• /
• 1984

The fast-rising high-voltage pulse generation circuit system of a theta pinch is both theoretically and experimentally investigated. The idealized model of this circuit system is a hybrid circuit system composed of three parts: a lumped circuit part being consisted of a capacitor bank and a spark switch connected in series, another lumped circuit part being consisted of the Blumlein transmission line, whose end load is the pinch coil. the voltage difference between two ends of the pinch coil is formulated by analyzing this hybrid circuit system by means of the law of the signal propagation in the transmission line and Kirchhoff's laws. The expedient numerical method for computer calculation is developed to generate the pulse profile of the voltage difference across the pinch coil. The period of the experimentally measured main pulse is a fourth of the theoretical one neglecting the resistance of the pinch coil. We attribute this discrepancy to the modelling in the theoretical calculation that hte resistance and inductance of the spark switch and capacitor bank are assumed to be constant through discharge. Therefore, we can see that the rise time of the imploding magnetic-field pulse is mainly dependent on the spark switch and capacitor bank.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.214-220
• /
• 2011

This paper attempts to address the effectiveness of physical-layer network coding (PNC) on the throughput improvement for multi-hop multicast in random wireless ad hoc networks (WAHNs). We prove that the per session throughput order with PNC is tightly bounded as ${\Theta}((n\sqrt{m}R(n))^{-1})$ if $m=(R^{-2}(n))$, where n is the total number of nodes, R(n) is the communication range, and m is the number of destinations for each multicast session. We also show that per-session throughput order with PNC is tight bounded as ${\Theta}(n^{-1})$, when $m={\Omega}(R^{-2}(n))$. The results of this paper imply that PNC cannot improve the throughput order of multicast in random WAHNs, which is different from the intuition that PNC may improve the throughput order as it allows simultaneous signal access and combination.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.367-372
• /
• 2000

ZnO thin films were deposited on amorphous slide glass and $SiO_2$/Si substrates by Facing Targets Sputtering method with sputtering current 0.1~0.8 A, working pressure 0.5~3 mTorr and substrate temperature R.T~$400^{\circ}C$. When the sputtering current was 0.4 A, working pressure was 0.5 mTorr and substrate temperature was 30$0^{\circ}C$, ${\Delta}{\Theta}_{50}$ value of ZnO/glass and ZnO/$SiO_2$/si thin film was $3.8^{\circ}$ and $2.98^{\circ}$, respectively. In these conditions, we knew that ZnO thin film were deposited with good c-axis orientation on amorphous slide glass by FTS system.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.5 s.60
• /
• pp.567-576
• /
• 2002

Maximum-strength concrete-ailed steel square tubular columns were tested under concentric and biaxial eccentric load. Buckling length-section depth ratio $L_k/D$, magnitude of eccentricity e, and angle of eccentric load ${\theta}$ were selected as experimental parameters. Strength and behavior were also examined. Test results showed that the maximum strength of columns under biaxial eccentric load could be predicted using the previously proposed strength formula of columns under uniaxial eccentric load. Likewise, the behavior and maximum strength of columns could be predicted using the analysis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.10 s.115
• /
• pp.1024-1035
• /
• 2006

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of thick, complete (circumferentially closed), circular rings with an elliptical or circular cross-section. Displacement components $u_r,\;u_\theta\;and\;u_z$ in the radial, circumferential, and axial directions, respectively, are taken to be periodic in ${\theta}$ and in time, and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the circular rings are formulated, and upper bound values of the frequencies are obtained by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rings. Novel numerical results are presented for the circular rings having an elliptical cross-section based upon 3-D theory. Comparisons are also made between the frequencies from the present 3-D Ritz method and ones obtained from thin and thick ring theories, experiments, and another 3-D method.

• Water for future
• /
• v.27 no.1
• /
• pp.141-150
• /
• 1994

The purpose of this study is develope the algorithm of channel routing model which can be used for flood forecasting. In routing model, the hydrulic technique of the implicit scheme in the dynamic equation is chosen to route the unsteady varied flow. The channel routing model is connected with conceptual watershed model which is able to compute the flood hydrograph from each subbasin. The comparative study shows that the conceptual model can simulate the watershed runoff accurately. As a result of investigating the channel routing model, the optimal weighting factor $\theta$ which fixes two points between time line is selected. And also, the optimal error tolerance which satisfies computing time and converge of solution is chosen.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.871-876
• /
• 2011

In this paper, the equilibrium flight conditions of a Korean Traditional Bangpae Kite with low aspect ratio were analyzed by it's aerodynamic data of wind tunnel test. The data of aerodynamic forces and center of pressure of the Kite were used to calculate the relative length of bridles to satisfy the condition of settling the kite to the static equilibrium steady state between ${\theta}=30^{\circ}{\sim}60^{\circ}$. From this equilibrium flight performance analysis, we obtained ($0.88{\pm}0.02$)c of the rear bridle length corresponding to 0.88c of fixed front bridle length. These results were exact agreement with the relative bridle lengths by Korean classical method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1153-1159
• /
• 2003

The effects of changing aqueous solution properties by nonionic surfactants on wetting behavior and water retention properies of hydrophobic PET (polyethylene terephthalate) fabric were reported. The aqueous solution properties were diversified by mixing and diluting two nonionic surfactants, i.e., sorbitan monolaurate (Span 20) and polyoxyethylene(20) sorbitan monolaurate (Tween 20). The surface wetting properties ($cos{\theta}$) of PET fabric were greatly improved by adding $10^{-1}g/dl$ Tween 20 and further improved by mixing Span 20 to the system. The water retention properties (W) of PET fabric were also greatly increased by addition of $10^{-1}g/dl$ Tween 20. In diluted surfactant systems, the $cos{\theta}'s$ were increased with decreasing surface tension of aqueous liquids. The ratios of aqueous liquid retained in the pore structure to liquid retention capacity (W/H) were also increased with decreasing surface tension, however, W/H values were dramatically increased right after critical micelle concentration (cmc). The existence of micelles was important for the retention of aqueous liquids in the fabric. The critical surface tension of PET fabric used was found to be 28.7dyne/cm.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.241-250
• /
• 2017

Auxetic is a structure that behave as negative Poisson's ratio. It is known for high mechanical property like energy absorption and destruction toughness so far. In this paper, we aimed to design auxetic structure which has small internal energy when force is applied and high NPR and over 50N/mm stiffness by using optimization method. We defined length(L), thickness(t), angle(${\theta}_1$, ${\theta}_2$) as design factors and also von-Mises stress, NPR, stiffness as reaction factors. We used Box-Behnken method and conducted 4factors - 3levels experiment design. We also analyzed each models by using CSD_EPLAST, Edison program, and did extra analysis for more accurate results. Finally, we found out the optimal design factors which is satisfied aimed value and increased reliability through factor analysis and validity verification.